ARFF DRIVER OPERATOR EXAM QUESTIONS WITH CORRECT ANSWERS LATEST UPDATE
2025/2026
1 .The key thing to remember when conducting a inspection of an ARFF apparatus is? - Answers
be systematic
2. When performing the hand line nozzle test, you must discharge foam onto a paved surface
for a period of? - Answers 30 seconds
3. The first apparatus test record that evaluates the overall performance of an ARFF apparatus
is used on a ____ basis? - Answers Yearly
4. All of the following about parking an ARFF apparatus are TRUE except? - Answers Park on the
opposite side of the track from the incident
5. The airfield area that is used for luggage handling, A/C refueling and personnel is? - Answers
Ramps
6. All if the following statements about the importance of preventive maintenance are TRUE
except that it? - Answers Decrease amount of wear and tear
7. During the expansion and drainage test, note a record the level of accumulated solution in the
bottom of the cylinder every _____ seconds? - Answers 30 seconds
8. It is recommended that fuel, oil, and mileage records be updated? - Answers As determined
by the authority having jurisdiction
9. When planning a response route involving an ARFF apparatus, you should always? - Answers
Identify all height, weight, and width restricted areas that your apparatus may encounter
10. Alternating red and green lights from the tower indicated? - Answers Proceed with caution
11. Proper operation of the foam transfer pump should be inspected? - Answers Weekly
12. Identify the TRUE statement about preparing for the turret ground pattern test? - Answers
Turret must be tilted upward at least 30 degrees angle with the horizontal
13. Items that are inspected on a periodic basis are usually preformed? - Answers On 4 to 12
month basis
Breaking distance - Answers Distance an apparatus travels from the time the brakes are applied
until it comes to a complete stop.
Reaction distance - Answers Time it takes to transfer foot from accelerator to brake.
Total breaking distance - Answers Is the sum of the driver/operators reaction distance and
braking distance.
, 15. An instrument landing system (ILS) critical area sign has a white inscription on a red back
ground and is a? - Answers Mandatory instruction sign
16. Identify TWO safety issues that you must make sure of prior to opening the engine access
door? - Answers Engine is shut down
There is sufficient clearance to open the compartment access door
17. For the hand line nozzle test, tilt the hand line nozzle upward to form a? - Answers 30 degree
angel with the horizontal
18. Identify three items that should be included on a weekly? - Answers Intake strainer
• Foam transfer pump
• Pump pressure control device
19. Identify TWO TRUE statements about the turning radius of a apparatus? - Answers •
Operator should practice driving the apparatus to be familiar
• The amount of space the apparatus takes in a 360 degree turn
20. Airplanes land in the following correct order of patterns? - Answers • downwind leg
• base leg
• final approach
21. The purpose of the manifold on the center counsel is? - Answers Regulate the air pressure in
members SCBA
22. THREE items you must verify prior to conducting the foam solution-concentrate test, turret
ground pattern test, and expansion and drainage test? - Answers • The pressure and flow
characteristics of each apparatus outlet
• That the apparatus Water and foam systems operational
• That the Piping system flushed
Foam transfer pump - Answers Weekly
Turrets - Answers Daily
Foam test result - Answers Test records
Generator - Answers Periotic
Oil filter change - Answers Fuel, oil mileage record
2025/2026
1 .The key thing to remember when conducting a inspection of an ARFF apparatus is? - Answers
be systematic
2. When performing the hand line nozzle test, you must discharge foam onto a paved surface
for a period of? - Answers 30 seconds
3. The first apparatus test record that evaluates the overall performance of an ARFF apparatus
is used on a ____ basis? - Answers Yearly
4. All of the following about parking an ARFF apparatus are TRUE except? - Answers Park on the
opposite side of the track from the incident
5. The airfield area that is used for luggage handling, A/C refueling and personnel is? - Answers
Ramps
6. All if the following statements about the importance of preventive maintenance are TRUE
except that it? - Answers Decrease amount of wear and tear
7. During the expansion and drainage test, note a record the level of accumulated solution in the
bottom of the cylinder every _____ seconds? - Answers 30 seconds
8. It is recommended that fuel, oil, and mileage records be updated? - Answers As determined
by the authority having jurisdiction
9. When planning a response route involving an ARFF apparatus, you should always? - Answers
Identify all height, weight, and width restricted areas that your apparatus may encounter
10. Alternating red and green lights from the tower indicated? - Answers Proceed with caution
11. Proper operation of the foam transfer pump should be inspected? - Answers Weekly
12. Identify the TRUE statement about preparing for the turret ground pattern test? - Answers
Turret must be tilted upward at least 30 degrees angle with the horizontal
13. Items that are inspected on a periodic basis are usually preformed? - Answers On 4 to 12
month basis
Breaking distance - Answers Distance an apparatus travels from the time the brakes are applied
until it comes to a complete stop.
Reaction distance - Answers Time it takes to transfer foot from accelerator to brake.
Total breaking distance - Answers Is the sum of the driver/operators reaction distance and
braking distance.
, 15. An instrument landing system (ILS) critical area sign has a white inscription on a red back
ground and is a? - Answers Mandatory instruction sign
16. Identify TWO safety issues that you must make sure of prior to opening the engine access
door? - Answers Engine is shut down
There is sufficient clearance to open the compartment access door
17. For the hand line nozzle test, tilt the hand line nozzle upward to form a? - Answers 30 degree
angel with the horizontal
18. Identify three items that should be included on a weekly? - Answers Intake strainer
• Foam transfer pump
• Pump pressure control device
19. Identify TWO TRUE statements about the turning radius of a apparatus? - Answers •
Operator should practice driving the apparatus to be familiar
• The amount of space the apparatus takes in a 360 degree turn
20. Airplanes land in the following correct order of patterns? - Answers • downwind leg
• base leg
• final approach
21. The purpose of the manifold on the center counsel is? - Answers Regulate the air pressure in
members SCBA
22. THREE items you must verify prior to conducting the foam solution-concentrate test, turret
ground pattern test, and expansion and drainage test? - Answers • The pressure and flow
characteristics of each apparatus outlet
• That the apparatus Water and foam systems operational
• That the Piping system flushed
Foam transfer pump - Answers Weekly
Turrets - Answers Daily
Foam test result - Answers Test records
Generator - Answers Periotic
Oil filter change - Answers Fuel, oil mileage record
