Florida Driver Manual Study Guide for
Knowledge Exam Latest Update
In your vehicle, what should you adjust before you start your engine? -
CORRECT ANSWER >>>>>1) Be sure vehicle is in park or neutral
2) Adjust the seat so you can reach all controls.
3) Adjust all rear-view mirrors so that you can use them without having to lean
forward or backward.
4) Move anything that blocks your view of mirrors or roadway.
5) Lock all car doors.
6) Put on your seat belt and make sure all passengers do the same.
What are the equipment requirements for windshields? - CORRECT ANSWER
>>>>>They must be safety glass and may not be covered or treated with any
material that makes the windshield reflective or non-transparent.
They must be free of any stickers not required by law.
What are the equipment requirements for side windows? - CORRECT ANSWER
,>>>>>They may not be composed of, covered by, or treated with any material
which has a highly reflective or mirrored appearance and reflects more than
25% of the light(side windows) or more than 35% of the light(rear window).
Bumper height requirements for cars that weigh less than 2500 pounds. -
CORRECT ANSWER >>>>>Front bumper height of 22 inches
Rear bumper height of 22 inches
Bumper height requirements for cars that weigh between 2500 and 3499
pounds. - CORRECT ANSWER >>>>>Front bumper height of 24 inches
Rear bumper height of 26 inches
Bumper height requirements for cars that weigh 3500 pounds or more -
CORRECT ANSWER >>>>>Front bumper height of 27 inches
Rear bumper height of 29 inches
Bumper height requirements for trucks that weigh less than 2000 pounds -
CORRECT ANSWER >>>>>Front bumper height of 24 inches
Rear bumper height of 26 inches
Bumper height requirements for trucks that weigh between 2000 and 3000
pounds - CORRECT ANSWER >>>>>Front bumper height of 27 inches
, Rear bumper height of 29 inches
Bumper height requirements for trucks that weigh between 3000 and 5000
pounds - CORRECT ANSWER >>>>>Front bumper height of 28 inches
Rear bumper height of 30 inches
Are the bumper heights the same for every vehicle? - CORRECT ANSWER
>>>>>No
What must you do if hauling a load of material which could fall or blow onto the
roadway? - CORRECT ANSWER >>>>>You must use a close-fitting cover.
When a projected load extends more than 4 feet from the vehicle, what must
you use to clearly mark it in the daytime? - CORRECT ANSWER >>>>>Red flags
at least 18 inches square must mark the extremities of the load.
When a projected load extends more than 4 feet from the vehicle, what must
you use to clearly mark it at night? - CORRECT ANSWER >>>>>1) Two red
lamps on the back of the load that can be seen from at least 500 feet to the
rear.
2) Two red reflectors on the rear that can be seen from 100 to 600 feet when
directly in front of low beam headlights, and located to show the load's full
width.
Knowledge Exam Latest Update
In your vehicle, what should you adjust before you start your engine? -
CORRECT ANSWER >>>>>1) Be sure vehicle is in park or neutral
2) Adjust the seat so you can reach all controls.
3) Adjust all rear-view mirrors so that you can use them without having to lean
forward or backward.
4) Move anything that blocks your view of mirrors or roadway.
5) Lock all car doors.
6) Put on your seat belt and make sure all passengers do the same.
What are the equipment requirements for windshields? - CORRECT ANSWER
>>>>>They must be safety glass and may not be covered or treated with any
material that makes the windshield reflective or non-transparent.
They must be free of any stickers not required by law.
What are the equipment requirements for side windows? - CORRECT ANSWER
,>>>>>They may not be composed of, covered by, or treated with any material
which has a highly reflective or mirrored appearance and reflects more than
25% of the light(side windows) or more than 35% of the light(rear window).
Bumper height requirements for cars that weigh less than 2500 pounds. -
CORRECT ANSWER >>>>>Front bumper height of 22 inches
Rear bumper height of 22 inches
Bumper height requirements for cars that weigh between 2500 and 3499
pounds. - CORRECT ANSWER >>>>>Front bumper height of 24 inches
Rear bumper height of 26 inches
Bumper height requirements for cars that weigh 3500 pounds or more -
CORRECT ANSWER >>>>>Front bumper height of 27 inches
Rear bumper height of 29 inches
Bumper height requirements for trucks that weigh less than 2000 pounds -
CORRECT ANSWER >>>>>Front bumper height of 24 inches
Rear bumper height of 26 inches
Bumper height requirements for trucks that weigh between 2000 and 3000
pounds - CORRECT ANSWER >>>>>Front bumper height of 27 inches
, Rear bumper height of 29 inches
Bumper height requirements for trucks that weigh between 3000 and 5000
pounds - CORRECT ANSWER >>>>>Front bumper height of 28 inches
Rear bumper height of 30 inches
Are the bumper heights the same for every vehicle? - CORRECT ANSWER
>>>>>No
What must you do if hauling a load of material which could fall or blow onto the
roadway? - CORRECT ANSWER >>>>>You must use a close-fitting cover.
When a projected load extends more than 4 feet from the vehicle, what must
you use to clearly mark it in the daytime? - CORRECT ANSWER >>>>>Red flags
at least 18 inches square must mark the extremities of the load.
When a projected load extends more than 4 feet from the vehicle, what must
you use to clearly mark it at night? - CORRECT ANSWER >>>>>1) Two red
lamps on the back of the load that can be seen from at least 500 feet to the
rear.
2) Two red reflectors on the rear that can be seen from 100 to 600 feet when
directly in front of low beam headlights, and located to show the load's full
width.
