QUESTIONS WITH ANSWERS GRADED A+
◉ horizontal and vertical openings, the operator must know: To
effectively judge the ability of a vehicle to pass through areas of
restricted. Answer: vehicle dimensions.
◉ Which driving skill would not require using a spotter. Answer:
Diminishing clearance
◉ The distance a vehicle travels from the point where you begin
recognizing the hazard until the apparatus comes to a complete stop
is called the:. Answer: total stopping distance.
◉ The confined space turnaround maneuver allows an operator to
turn the apparatus degrees. Answer: 180
◉ Improper tire pressures may cause. Answer: poor handling
◉ One method of performing an apparatus/pretrip inspection is the.
Answer: walk-around method.
, ◉ Before shutdown the apparatus engine temperature should be
allowed to stabilize by idling it for minutes.. Answer: 3 to 5
◉ Checking for voltage, electrolyte level, and corrosion are all steps
in inspecting:. Answer: the battery.
◉ While traveling in the center lane of a multiple-lane highway on
an emergency call, the vehicle in front of you stops. You should:.
Answer: brake to reduce speed and pass on the left side of the
vehicle.
◉ The vacuum test requires a reading at the end of 5 minutes with
no more than inches of vacuum being lost.. Answer: 10
◉ When responding to emergencies, the use of warning devices:.
Answer: does not allow the driver to disregard other drivers.
◉ When approaching unguarded railroad crossings, the driver shall:.
Answer: come to a complete stop.
◉ Level I staging may be:. Answer: used in the initial response to a
fire or other incident involving more than one responding company.