2027 Review | Comprehensive Test
Questions and Verified Answers | 100%
Correct | Grade A (Newest Update) Quiz
When using a rotary saw, start all cuts at rpm to prevent blades from binding into the
material. - Answer--maximum
is an example of a common prying tool. - Answer--halligan
An swinging door is indicated by the hinges being visible. - Answer--outward
is an example of a pulling tool. - Answer--sheetrock rake
The and the are commonly paired together as "irons". - Answer--halligan Flat head axe
When breaking glass, stand , use the side of the tool and strike the of the pane. -
Answer--up-wind blunt/flat corner
When getting a power tool from an apparatus for use on the fire ground, immediately
the tool, after warming the tool, and then carry the tool to where it will be used. -
Answer--start turn off
rope is constructed by twisting yarns together to from strands. - Answer--laid
A is a knot element that is formed by simply bending the rope back on itself while
keeping the sides parallel. - Answer--bight
, Any life-safety rope that fails to pass inspection or has been impact-loaded should be
from service immediately. - Answer--removed
A knot is used to tie two pieces of webbing together. - Answer--water
A knot is used to form a single loop that will not constrict around the object that is being
tied. - Answer--bow line
A is a knot element made by crossing the side of a bight over the standing part. -
Answer--loop
A knot is used to tie off a ladder? - Answer--clove hitch
The group of Figure 8 knots is known as the " " of eights. - Answer--family
rope is preferred for life-safety applications. - Answer--synthetic
For firefighting operations, span-of-control is to . - Answer--3 7
On an emergency scene, Safety is the responsibility of . - Answer--everybody
In the Mat-Su Borough, communications are used when communicating over a radio. -
Answer--clear text
When transmitting using a radio speak and . - Answer--clearly calmly
The ICS term that refers to a functional designation such as vent or water supply is a . -
Answer--group
The Section Chief reports directly to the IC and directs the tactical operations to meet
the strategic goals and tactical objectives specified in the incident action plan. -
Answer--operation
The Section Chief is responsible for the collection, documentation, evaluation, and
dissemination of incident situation information and intelligence to the Incident
Commander. - Answer--planning
The Section Chief is responsible for all support requirements needed to facilitate
effective and efficient incident management. - Answer--logistics