REAL OSHA 500 EXAM 2025 UPDATED ACTUAL EXAM WITH CORRECT SOLUTIONS.
The maximum amount of time an Authorized Outreach Trainer can teach in one day is: - (ANSWER)7 1/2
hours
The 10-hour Construction Industry Outreach Training Program contains mandatory topic requirements
which include "Introduction to OSHA" , "Personal Protective and Lifesaving Equipment " ,
"_______________________" and "Health Hazards in Construction." - (ANSWER)Focus Four Hazards
(Falls, Electrocution, Stuck-By, and Caught-in or -Between)
One of the objectives of the two-hour "Introduction to OSHA" topic is to inform workers of their rights .
All of the following are worker rights under OSHA except for the right to: - (ANSWER)Be compensated
double their salary for overtime work
By signing and dating the OSHA Outreach Training Program Report form, the trainer is: -
(ANSWER)Certifying that he/she has conducted this outreach training class in accordance with the OSHA
Outreach Training Program requirements and that the information on the form is true and correct
Course learning objectives are: - (ANSWER)Specific statements defining measurable learner
performance
Some effective training techniques for reviewing content include, using role-plays, practice, analogies,
technology, as well as: - (ANSWER)Using hands-on activities, games, memory aids, and case studies
When developing effective electronic presentations using PowerPoint , you should use: -
(ANSWER)Slides that are clear and concise, and with limited text
Which of the following list best describes OSHA's inspection priorities? - (ANSWER)Imminent dander,
fatality/catastrophe, complaints/referrals, programmed inspections
Which of the following violations exists when an employer has demonstrated an intentional disregard
for the requirements of the OSH Act or a plain indifference to employee safety and health? -
(ANSWER)Willful
, REAL OSHA 500 EXAM 2025 UPDATED ACTUAL EXAM WITH CORRECT SOLUTIONS.
A typical OSHA inspection includes which of the following onsite activities? - (ANSWER)Presentation of
inspector credentials, opening conference, inspection walk around, closing conference
This excerpt "each employer shall furnish to each of his employees employment and a place of
employment which are free from recognized hazards that are causing or are likely to cause death or
serious physical harm to his employees" is part of which of the following? - (ANSWER)General duty
clause [5(a)(1)] of the OSH Act
Which of the following best describes the legal intent of the Occupational Safety and Health Act of
1970? - (ANSWER)To eliminate or minimize on-the-job exposure to chemicals and safety hazards and
protect the general public from environmental contamination
The employer is responsible for insuring prompt medical attention in case of serious injury. What is
required if no medical facility or physician is reasonably accessible? - (ANSWER)A person with valid first-
aid training on the worksite and a willingness to render first aid
Which of the following is an engineering noise control? - (ANSWER)All of the above (Substituting quieter
equipment for existing equipment, Retrofitting existing equipment with damping materials, mufflers, or
enclosures, Erecting barriers)
Air contaminant hazards commonly found on construction sites include asbestos, silica, and: -
(ANSWER)Lead
According to the Hazard Communication Standard, when just employers communicate hazard
information to employees? - (ANSWER)At the time of the employee's initial assignment and whenever a
new physical or health hazard is introduced into their work area
When steel erection contractors engage in multiple lift rigging, the maximum number of members. In a
single lift must not exceed - (ANSWER)5
A leading cause of crane fatalities in contact with overhead power lines. What is the minimum safe
clearance between a crane in use and energized power lines when the voltage is unknown? -
(ANSWER)20 feet
The maximum amount of time an Authorized Outreach Trainer can teach in one day is: - (ANSWER)7 1/2
hours
The 10-hour Construction Industry Outreach Training Program contains mandatory topic requirements
which include "Introduction to OSHA" , "Personal Protective and Lifesaving Equipment " ,
"_______________________" and "Health Hazards in Construction." - (ANSWER)Focus Four Hazards
(Falls, Electrocution, Stuck-By, and Caught-in or -Between)
One of the objectives of the two-hour "Introduction to OSHA" topic is to inform workers of their rights .
All of the following are worker rights under OSHA except for the right to: - (ANSWER)Be compensated
double their salary for overtime work
By signing and dating the OSHA Outreach Training Program Report form, the trainer is: -
(ANSWER)Certifying that he/she has conducted this outreach training class in accordance with the OSHA
Outreach Training Program requirements and that the information on the form is true and correct
Course learning objectives are: - (ANSWER)Specific statements defining measurable learner
performance
Some effective training techniques for reviewing content include, using role-plays, practice, analogies,
technology, as well as: - (ANSWER)Using hands-on activities, games, memory aids, and case studies
When developing effective electronic presentations using PowerPoint , you should use: -
(ANSWER)Slides that are clear and concise, and with limited text
Which of the following list best describes OSHA's inspection priorities? - (ANSWER)Imminent dander,
fatality/catastrophe, complaints/referrals, programmed inspections
Which of the following violations exists when an employer has demonstrated an intentional disregard
for the requirements of the OSH Act or a plain indifference to employee safety and health? -
(ANSWER)Willful
, REAL OSHA 500 EXAM 2025 UPDATED ACTUAL EXAM WITH CORRECT SOLUTIONS.
A typical OSHA inspection includes which of the following onsite activities? - (ANSWER)Presentation of
inspector credentials, opening conference, inspection walk around, closing conference
This excerpt "each employer shall furnish to each of his employees employment and a place of
employment which are free from recognized hazards that are causing or are likely to cause death or
serious physical harm to his employees" is part of which of the following? - (ANSWER)General duty
clause [5(a)(1)] of the OSH Act
Which of the following best describes the legal intent of the Occupational Safety and Health Act of
1970? - (ANSWER)To eliminate or minimize on-the-job exposure to chemicals and safety hazards and
protect the general public from environmental contamination
The employer is responsible for insuring prompt medical attention in case of serious injury. What is
required if no medical facility or physician is reasonably accessible? - (ANSWER)A person with valid first-
aid training on the worksite and a willingness to render first aid
Which of the following is an engineering noise control? - (ANSWER)All of the above (Substituting quieter
equipment for existing equipment, Retrofitting existing equipment with damping materials, mufflers, or
enclosures, Erecting barriers)
Air contaminant hazards commonly found on construction sites include asbestos, silica, and: -
(ANSWER)Lead
According to the Hazard Communication Standard, when just employers communicate hazard
information to employees? - (ANSWER)At the time of the employee's initial assignment and whenever a
new physical or health hazard is introduced into their work area
When steel erection contractors engage in multiple lift rigging, the maximum number of members. In a
single lift must not exceed - (ANSWER)5
A leading cause of crane fatalities in contact with overhead power lines. What is the minimum safe
clearance between a crane in use and energized power lines when the voltage is unknown? -
(ANSWER)20 feet
