MINNESOTA SPECIAL ENGINEER
BOILER LICENSE EXAM
QUESTIONS WITH COMPLETE
SOLUTIONS GUARANTEED
PASS BRAND NEW 2025
For the purpose of rating boiler horsepower for
an Engineers License only, how many square
feet of boiler surface shall be equivalent to one
boiler horsepower on a boiler? -
ANSWER>>>10 Sq. Ft. Heating Surface
What is meant by the term "Low Pressure
Boiler"? -
ANSWER>>>Boilers operating at a steam or
other vapor
pressure of 15psig or less, or a hot water or
other liquid boiler in which the pressure does
,not exceed 160 psig or a temperature of 250
degrees F.
A person holding a current State of Minnesota
Special Engineers License could be in charge
of, or a shift engineer in what ANSWER>>>High
size plant(s)? - and
Low pressure boilers not to exceed a total of
50 boiler horsepower, or a shift engineer in a
100 horsepower plant.
Special Engineer may serve as an apprentice
of what size water/liquid or ANSWER>>>In
steam/vapor boiler? - plant any
regardless of size under the direct supervision
of a properly licensed engineer.
, The purpose of low water cut out on a steam
or hot water boiler ANSWER>>>Shut off the
is to what? - a low burner when
water condition exists.
The valve or valves that must relieve all excess
pressure on a steam or hot water boiler are
what? -
ANSWER>>>Safety valve and/or an
ASME approved
safety relief valve.
A Tri indicator could be found on a: -
ANSWER>>>Hot water boiler
A tri indicator would inform the boiler operator
of what? -
ANSWER>>>The TEMPERATURE of
the water, the
PRESSURE of the water in PSIG, and the
ALTITUDE of water in feet.
BOILER LICENSE EXAM
QUESTIONS WITH COMPLETE
SOLUTIONS GUARANTEED
PASS BRAND NEW 2025
For the purpose of rating boiler horsepower for
an Engineers License only, how many square
feet of boiler surface shall be equivalent to one
boiler horsepower on a boiler? -
ANSWER>>>10 Sq. Ft. Heating Surface
What is meant by the term "Low Pressure
Boiler"? -
ANSWER>>>Boilers operating at a steam or
other vapor
pressure of 15psig or less, or a hot water or
other liquid boiler in which the pressure does
,not exceed 160 psig or a temperature of 250
degrees F.
A person holding a current State of Minnesota
Special Engineers License could be in charge
of, or a shift engineer in what ANSWER>>>High
size plant(s)? - and
Low pressure boilers not to exceed a total of
50 boiler horsepower, or a shift engineer in a
100 horsepower plant.
Special Engineer may serve as an apprentice
of what size water/liquid or ANSWER>>>In
steam/vapor boiler? - plant any
regardless of size under the direct supervision
of a properly licensed engineer.
, The purpose of low water cut out on a steam
or hot water boiler ANSWER>>>Shut off the
is to what? - a low burner when
water condition exists.
The valve or valves that must relieve all excess
pressure on a steam or hot water boiler are
what? -
ANSWER>>>Safety valve and/or an
ASME approved
safety relief valve.
A Tri indicator could be found on a: -
ANSWER>>>Hot water boiler
A tri indicator would inform the boiler operator
of what? -
ANSWER>>>The TEMPERATURE of
the water, the
PRESSURE of the water in PSIG, and the
ALTITUDE of water in feet.
