CM 214 - LESSON 28 EXAM 4 QUESTIONS WITH 100%
VERIFIED ANSWERS.
Which of the following defines runoff?
a. the wearing away of soil by wind or water
b. the soil that is washed from the land into water, usually after rainfall
c. the rain, snow melt, and irrigation water that appears in streams, rivers,
drains, and sewers Answer - C
What is an SWPPP?
a. a plan that describes the measures that will be taken on a site to control
stormwater pollution
b. a best management practice that controls runoff, erosion, or sediment
c. a permit that authorizes a category of stormwater discharges under the CWA
within a geographical area Answer - A
Which type of BMP is implemented to maintain a clean jobsite?
a. erosion control
b. good housekeeping measures
c. sediment control Answer - B
What's the purpose of a stabilized construction entrance?
a. to compact the sediment attached to the wheels of construction vehicles
, b. to reduce the amount of runoff leaving the jobsite
c. to minimize the amount of soil being tracked from the jobsite Answer - C
When must changes be made to the SWPPP?
a. before the NOI is posted
b. when the CGP is updated during the construction project
c. when a BMP is found to be ineffective during an inspection Answer - C
Which of the following does the site supervisor have to do after an inspection?
a. Resubmit the SWPPP.
b. Prepare an inspection report.
c. Submit a Notice of Intent. Answer - B
When is the Notice of Termination filed?
a. once construction has ceased and the area is stabilized
b. before development and construction begin
c. during the construction phase Answer - A
When can the builder stop conducting SWPPP inspections and maintenance on
the site?
a. when the SWPPP is complete and the NOI has been filed
b. after the rainy season has ended
c. when construction is complete and all areas of the site have been
permanently stabilized Answer - C
When a storm or rainfall isn't in the forecast, how does the site supervisor
know when to inspect each BMP?
VERIFIED ANSWERS.
Which of the following defines runoff?
a. the wearing away of soil by wind or water
b. the soil that is washed from the land into water, usually after rainfall
c. the rain, snow melt, and irrigation water that appears in streams, rivers,
drains, and sewers Answer - C
What is an SWPPP?
a. a plan that describes the measures that will be taken on a site to control
stormwater pollution
b. a best management practice that controls runoff, erosion, or sediment
c. a permit that authorizes a category of stormwater discharges under the CWA
within a geographical area Answer - A
Which type of BMP is implemented to maintain a clean jobsite?
a. erosion control
b. good housekeeping measures
c. sediment control Answer - B
What's the purpose of a stabilized construction entrance?
a. to compact the sediment attached to the wheels of construction vehicles
, b. to reduce the amount of runoff leaving the jobsite
c. to minimize the amount of soil being tracked from the jobsite Answer - C
When must changes be made to the SWPPP?
a. before the NOI is posted
b. when the CGP is updated during the construction project
c. when a BMP is found to be ineffective during an inspection Answer - C
Which of the following does the site supervisor have to do after an inspection?
a. Resubmit the SWPPP.
b. Prepare an inspection report.
c. Submit a Notice of Intent. Answer - B
When is the Notice of Termination filed?
a. once construction has ceased and the area is stabilized
b. before development and construction begin
c. during the construction phase Answer - A
When can the builder stop conducting SWPPP inspections and maintenance on
the site?
a. when the SWPPP is complete and the NOI has been filed
b. after the rainy season has ended
c. when construction is complete and all areas of the site have been
permanently stabilized Answer - C
When a storm or rainfall isn't in the forecast, how does the site supervisor
know when to inspect each BMP?
