Page 1 of 27
BCTC Industrial Maintenance Technology AMTEC
(NOCTI Mechatronic) EXAM ALL WITH COMPLETE
200 QUESTIONS AND SOLUTIONS LATEST UPDATE
JUST RELEASED THIS YEAR
Question: What can happen if bolts and nuts are not properly torqued? - CORRECT
ANSWER✔✔They wear out quickly and can cause failure.
Question: What safety practice is used to prevent equipment from being energized? - CORRECT
ANSWER✔✔Lockout/Tagout
Question: A Safety Data Sheet (SDS) provides information about first aid measures, stability and
reactivity, and _____? - CORRECT ANSWER✔✔Handling and Storage
Question: Which of the following is not true of a title block? - CORRECT ANSWER✔✔Format is
the same from company to company.
Question: A NFPA 70E is a regulation that provides guidelines and details for ___________? -
CORRECT ANSWER✔✔Electrical safety
, Page 2 of 27
Question: GFCI devices are used for what purpose? - CORRECT ANSWER✔✔To prevent a person
from being electrocuted.
Question: A person with serious electrical injury should be moved only when _______. -
CORRECT ANSWER✔✔They are in immediate danger
Question: What must be provided by chemical manufacturers, distributors, and importers to
anyone who will work with these potentially dangerous materials? - CORRECT
ANSWER✔✔Safety Data Sheet (SDS).
Q:If you inhale phenolic fumes what would happen to you? - CORRECT ANSWER✔✔Trouble
breathing
Question: A _________ fire extinguisher should be used on an electrical fire. - CORRECT
ANSWER✔✔Class C
Question: What does OSHA stand for? - CORRECT ANSWER✔✔Occupational Safety & Health
Administration
Question: This type of drawing represents a three-dimensional object using several two-
dimensional views of the object. - CORRECT ANSWER✔✔Orthographic
, Page 3 of 27
Question: What are linear dimensions usually expressed in? - CORRECT ANSWER✔✔Decimal or
Fractional Units
Question: What does a filled triangle represent in a fluid power diagram? - CORRECT
ANSWER✔✔Hydraulic Flow
Question: You come across a fellow employee who is being electrocuted by becoming attached
to a live electrical circuit, what is the first thing you should do? - CORRECT ANSWER✔✔Shut off
the circuit.
Question: What would slippery floors and cluttered walkways be considered in the workplace? -
CORRECT ANSWER✔✔Physical hazards.
Question: What tool is used to measure the turning force when tightening a fastener? -
CORRECT ANSWER✔✔Torque Wrench
Question: When working on an electrical, fluid power, or mechanical system a ____ procedure
should be performed to lock out the energy. - CORRECT ANSWER✔✔LOTO
Question: The section of a technical report which summarizes the report's contents is called
what? - CORRECT ANSWER✔✔Abstract
BCTC Industrial Maintenance Technology AMTEC
(NOCTI Mechatronic) EXAM ALL WITH COMPLETE
200 QUESTIONS AND SOLUTIONS LATEST UPDATE
JUST RELEASED THIS YEAR
Question: What can happen if bolts and nuts are not properly torqued? - CORRECT
ANSWER✔✔They wear out quickly and can cause failure.
Question: What safety practice is used to prevent equipment from being energized? - CORRECT
ANSWER✔✔Lockout/Tagout
Question: A Safety Data Sheet (SDS) provides information about first aid measures, stability and
reactivity, and _____? - CORRECT ANSWER✔✔Handling and Storage
Question: Which of the following is not true of a title block? - CORRECT ANSWER✔✔Format is
the same from company to company.
Question: A NFPA 70E is a regulation that provides guidelines and details for ___________? -
CORRECT ANSWER✔✔Electrical safety
, Page 2 of 27
Question: GFCI devices are used for what purpose? - CORRECT ANSWER✔✔To prevent a person
from being electrocuted.
Question: A person with serious electrical injury should be moved only when _______. -
CORRECT ANSWER✔✔They are in immediate danger
Question: What must be provided by chemical manufacturers, distributors, and importers to
anyone who will work with these potentially dangerous materials? - CORRECT
ANSWER✔✔Safety Data Sheet (SDS).
Q:If you inhale phenolic fumes what would happen to you? - CORRECT ANSWER✔✔Trouble
breathing
Question: A _________ fire extinguisher should be used on an electrical fire. - CORRECT
ANSWER✔✔Class C
Question: What does OSHA stand for? - CORRECT ANSWER✔✔Occupational Safety & Health
Administration
Question: This type of drawing represents a three-dimensional object using several two-
dimensional views of the object. - CORRECT ANSWER✔✔Orthographic
, Page 3 of 27
Question: What are linear dimensions usually expressed in? - CORRECT ANSWER✔✔Decimal or
Fractional Units
Question: What does a filled triangle represent in a fluid power diagram? - CORRECT
ANSWER✔✔Hydraulic Flow
Question: You come across a fellow employee who is being electrocuted by becoming attached
to a live electrical circuit, what is the first thing you should do? - CORRECT ANSWER✔✔Shut off
the circuit.
Question: What would slippery floors and cluttered walkways be considered in the workplace? -
CORRECT ANSWER✔✔Physical hazards.
Question: What tool is used to measure the turning force when tightening a fastener? -
CORRECT ANSWER✔✔Torque Wrench
Question: When working on an electrical, fluid power, or mechanical system a ____ procedure
should be performed to lock out the energy. - CORRECT ANSWER✔✔LOTO
Question: The section of a technical report which summarizes the report's contents is called
what? - CORRECT ANSWER✔✔Abstract
