CDFA Weight Verification Exam Practice Questions with Complete Solutions
100% Verified
1. What is the primary purpose of weight verification in a CDFA program?
A. To determine the economic value of a commodity
B. To confirm the accuracy of weights used for product transactions
C. To assess the nutritional content of a product
D. To calculate shipping costs
ANSWER: B. To confirm the accuracy of weights used for product transactions
2. Which agency is primarily responsible for weight verification standards in California?
A. USDA
B. FDA
C. CDFA Division of Measurement Standards (DMS)
D. CDPH
ANSWER: C. CDFA Division of Measurement Standards (DMS)
3. A device used to determine the mass of an object by comparing weights is called a:
A. Scale
B. Balance
C. Meter
D. Gauge
ANSWER: B. Balance
4. The term "tare weight" refers to:
A. The gross weight of a container and its contents
B. The weight of the contents only
C. The weight of the empty container or packaging
D. The legal maximum weight allowed
,ANSWER: C. The weight of the empty container or packaging
5. "Net weight" is calculated as:
A. Gross weight + Tare weight
B. Gross weight - Tare weight
C. Gross weight / Tare weight
D. Tare weight - Gross weight
ANSWER: B. Gross weight - Tare weight
6. Which of the following is a common type of scale used for heavy-capacity weighing?
A. Analytical balance
B. Platform scale
C. Kitchen scale
D. Postal scale
ANSWER: B. Platform scale
7. The National Institute of Standards and Technology (NIST) publishes what important handbook for
weights and measures?
A. Handbook 44
B. Handbook 130
C. Handbook 133
D. All of the above
ANSWER: D. All of the above
8. Handbook 133 primarily deals with:
A. Device specifications
B. Checking the net contents of packaged goods
C. Fuel quality
D. Labeling requirements
,ANSWER: B. Checking the net contents of packaged goods
9. What is the term for the smallest change in weight that a scale can detect?
A. Capacity
B. Accuracy
C. Resolution
D. Tolerance
ANSWER: C. Resolution
10. The maximum weight a scale is designed to measure is its:
A. Tare
B. Net
C. Capacity
D. Resolution
ANSWER: C. Capacity
11. A "seal" on a weighing device indicates that:
A. It is waterproof
B. It has been approved and tampering would be evident
C. It is manufactured for commercial use
D. It is accurate to 0.1%
ANSWER: B. It has been approved and tampering would be evident
12. Which of the following would likely require a large capacity truck scale?
A. Weighing a single apple
B. Weighing a pallet of canned goods
C. Weighing a shipment of livestock
D. Both B and C
ANSWER: D. Both B and C
, 13. The "zero" on a scale should be checked:
A. Only at the time of installation
B. Before each use
C. Once a year
D. Only if it looks incorrect
ANSWER: B. Before each use
14. If a scale does not return to zero when empty, it may lead to an error in:
A. Tare weight
B. Every subsequent weighing
C. The scale's capacity
D. The product's price
ANSWER: B. Every subsequent weighing
15. A "test weight" used to verify a scale's accuracy must be:
A. Made of any heavy material
B. Certified and of a known mass traceable to NIST
C. The same size as the product being weighed
D. At least 50% of the scale's capacity
ANSWER: B. Certified and of a known mass traceable to NIST
16. What is the purpose of a "tare" function on a scale?
A. To increase the scale's capacity
B. To automatically calculate the net weight by subtracting the container weight
C. To change the units from pounds to kilograms
D. To print a weight ticket
ANSWER: B. To automatically calculate the net weight by subtracting the container weight
100% Verified
1. What is the primary purpose of weight verification in a CDFA program?
A. To determine the economic value of a commodity
B. To confirm the accuracy of weights used for product transactions
C. To assess the nutritional content of a product
D. To calculate shipping costs
ANSWER: B. To confirm the accuracy of weights used for product transactions
2. Which agency is primarily responsible for weight verification standards in California?
A. USDA
B. FDA
C. CDFA Division of Measurement Standards (DMS)
D. CDPH
ANSWER: C. CDFA Division of Measurement Standards (DMS)
3. A device used to determine the mass of an object by comparing weights is called a:
A. Scale
B. Balance
C. Meter
D. Gauge
ANSWER: B. Balance
4. The term "tare weight" refers to:
A. The gross weight of a container and its contents
B. The weight of the contents only
C. The weight of the empty container or packaging
D. The legal maximum weight allowed
,ANSWER: C. The weight of the empty container or packaging
5. "Net weight" is calculated as:
A. Gross weight + Tare weight
B. Gross weight - Tare weight
C. Gross weight / Tare weight
D. Tare weight - Gross weight
ANSWER: B. Gross weight - Tare weight
6. Which of the following is a common type of scale used for heavy-capacity weighing?
A. Analytical balance
B. Platform scale
C. Kitchen scale
D. Postal scale
ANSWER: B. Platform scale
7. The National Institute of Standards and Technology (NIST) publishes what important handbook for
weights and measures?
A. Handbook 44
B. Handbook 130
C. Handbook 133
D. All of the above
ANSWER: D. All of the above
8. Handbook 133 primarily deals with:
A. Device specifications
B. Checking the net contents of packaged goods
C. Fuel quality
D. Labeling requirements
,ANSWER: B. Checking the net contents of packaged goods
9. What is the term for the smallest change in weight that a scale can detect?
A. Capacity
B. Accuracy
C. Resolution
D. Tolerance
ANSWER: C. Resolution
10. The maximum weight a scale is designed to measure is its:
A. Tare
B. Net
C. Capacity
D. Resolution
ANSWER: C. Capacity
11. A "seal" on a weighing device indicates that:
A. It is waterproof
B. It has been approved and tampering would be evident
C. It is manufactured for commercial use
D. It is accurate to 0.1%
ANSWER: B. It has been approved and tampering would be evident
12. Which of the following would likely require a large capacity truck scale?
A. Weighing a single apple
B. Weighing a pallet of canned goods
C. Weighing a shipment of livestock
D. Both B and C
ANSWER: D. Both B and C
, 13. The "zero" on a scale should be checked:
A. Only at the time of installation
B. Before each use
C. Once a year
D. Only if it looks incorrect
ANSWER: B. Before each use
14. If a scale does not return to zero when empty, it may lead to an error in:
A. Tare weight
B. Every subsequent weighing
C. The scale's capacity
D. The product's price
ANSWER: B. Every subsequent weighing
15. A "test weight" used to verify a scale's accuracy must be:
A. Made of any heavy material
B. Certified and of a known mass traceable to NIST
C. The same size as the product being weighed
D. At least 50% of the scale's capacity
ANSWER: B. Certified and of a known mass traceable to NIST
16. What is the purpose of a "tare" function on a scale?
A. To increase the scale's capacity
B. To automatically calculate the net weight by subtracting the container weight
C. To change the units from pounds to kilograms
D. To print a weight ticket
ANSWER: B. To automatically calculate the net weight by subtracting the container weight
