Electronic Communications: A Systems
ST
Approach – 1st Edition
UV
TEST BANK
IA
_A
Jeffrey S. Beasley
PP
RO
Comprehensive Test Bank for Instructors
VE
and Students
D?
© Jeffrey S. Beasley
All rights reserved. Reproduction or distribution without permission is prohibited.
??
©STUDYSTREAM
, Beasley/Electronic Communications
ST
Chapter 1: Fundamental Communications Concept
Multiple Choice Questions
UV
1. What agency in the United States has been given the authority to establish and enforce
regulations regarding the use of radio transmitters and other generators of radio-
frequency energy?
A. Transport and Communications Ministry
IA
B. Federal Communications Commission (FCC)
C. International Telecommunication Union (ITU)
D. Bell Laboratories
_A
2. What three ratios do decibels represent?
A. Powers, voltages, currents
B. Powers, voltages, frequencies
C. Voltages, frequencies, impedances
PP
D. Logarithms, voltages, currents
3. Electric and magnetic fields both result from voltage potentials and _________.
A. Radio frequencies
RO
B. Audio frequencies
C. Current flows
D. Electric charges
4. The carrier is often a(n) _____________.
VE
A. sine wave
B. vector
C. angular frequency
D. amplitude modulation
D?
5. Electronics as a discipline within the field of physical science emerged from the
discovery of __________.
A. microwaves
B. gamma rays
??
C. cosmic rays
D. radio waves
1
, 6. What two factors limit all communication systems?
A. Bandwidth and noise
ST
B. Bandwidth and frequency
C. Noise and decibels
D. Noise and currents
7. You are troubleshooting a piece of equipment and you find that unauthorized
UV
modifications may have been performed on the equipment. What type of failure does this
situation represent?
A. Faulty
B. Complete
C. Induced
IA
D. Poor system performance
8. Which of the following is an essential attribute for being an effective troubleshooter?
_A
A. To know the latest trends in noise analysis
B. To be able to limit the frequency response
C. To know the conversion from the time to the frequency domain
D. To be able to isolate faulty components quickly and repair the defective circuit
PP
9. Which of the following is the most troublesome form of external noise?
A. Atmospheric
B. Human-made
C. Space
RO
D. Thermal
10. White noise is directly proportional to both temperature and _____________.
A. bandwidth
VE
B. AC voltage
C. power transfer
D. frequency
11. The overall noise-intensity versus frequency curves for semiconductor devices would
D?
have what type of shape?
A. Angular
B. Square
C. Bathtub
??
D. Uneven
12. Which of the following did French mathematician Jean Baptiste Joseph Fourier develop?
2
, A. A means to break down any periodic waveform into a series of sine and/or cosine
waves at multiples of the fundamental frequency.
B. He created thermal interactions between free electrons and vibrating ions in a
ST
conductor.
C. The formula for calculating shot noise contributed for a complete transistor.
D. The relative measure of the desired signal power to the noise power.
13. Which of the following pieces of equipment would be considered advanced test
UV
equipment?
A. Digital multimeter (DMM)
B. Broadband oscilloscope
C. Spectrum analyzer
D. RF generator
IA
14. When troubleshooting, why would you perform voltage and resistance checks?
A. To check for signals
_A
B. To eliminate induced failures
C. To observe frequency spectra
D. To isolate defective components
15. Why would you use Friiss’s formula?
PP
A. To provide the overall noise effect of a multistage system.
B. To break down any periodic waveform into a series of sine and/or cosine waves at
multiples of the fundamental frequency.
C. To establish that different users can share bands of frequencies provided that each
RO
user was assigned exclusive use of a frequency range within that band.
D. To show how the construction of a square wave can be seen to be made up of a
number of sinusoids.
16. What does the graphical display produced by an oscilloscope represent?
VE
A. Signals in the frequency domain
B. Time-domain representation
C. Amplitude of each frequency component
D. Amplitude characteristics
D?
17. ____________ consists of a mixture of signals at all frequencies and at randomly
occurring amplitudes.
A. Decibel units
??
B. Frequency
C. Bandwidth
D. Noise
3
ST
Approach – 1st Edition
UV
TEST BANK
IA
_A
Jeffrey S. Beasley
PP
RO
Comprehensive Test Bank for Instructors
VE
and Students
D?
© Jeffrey S. Beasley
All rights reserved. Reproduction or distribution without permission is prohibited.
??
©STUDYSTREAM
, Beasley/Electronic Communications
ST
Chapter 1: Fundamental Communications Concept
Multiple Choice Questions
UV
1. What agency in the United States has been given the authority to establish and enforce
regulations regarding the use of radio transmitters and other generators of radio-
frequency energy?
A. Transport and Communications Ministry
IA
B. Federal Communications Commission (FCC)
C. International Telecommunication Union (ITU)
D. Bell Laboratories
_A
2. What three ratios do decibels represent?
A. Powers, voltages, currents
B. Powers, voltages, frequencies
C. Voltages, frequencies, impedances
PP
D. Logarithms, voltages, currents
3. Electric and magnetic fields both result from voltage potentials and _________.
A. Radio frequencies
RO
B. Audio frequencies
C. Current flows
D. Electric charges
4. The carrier is often a(n) _____________.
VE
A. sine wave
B. vector
C. angular frequency
D. amplitude modulation
D?
5. Electronics as a discipline within the field of physical science emerged from the
discovery of __________.
A. microwaves
B. gamma rays
??
C. cosmic rays
D. radio waves
1
, 6. What two factors limit all communication systems?
A. Bandwidth and noise
ST
B. Bandwidth and frequency
C. Noise and decibels
D. Noise and currents
7. You are troubleshooting a piece of equipment and you find that unauthorized
UV
modifications may have been performed on the equipment. What type of failure does this
situation represent?
A. Faulty
B. Complete
C. Induced
IA
D. Poor system performance
8. Which of the following is an essential attribute for being an effective troubleshooter?
_A
A. To know the latest trends in noise analysis
B. To be able to limit the frequency response
C. To know the conversion from the time to the frequency domain
D. To be able to isolate faulty components quickly and repair the defective circuit
PP
9. Which of the following is the most troublesome form of external noise?
A. Atmospheric
B. Human-made
C. Space
RO
D. Thermal
10. White noise is directly proportional to both temperature and _____________.
A. bandwidth
VE
B. AC voltage
C. power transfer
D. frequency
11. The overall noise-intensity versus frequency curves for semiconductor devices would
D?
have what type of shape?
A. Angular
B. Square
C. Bathtub
??
D. Uneven
12. Which of the following did French mathematician Jean Baptiste Joseph Fourier develop?
2
, A. A means to break down any periodic waveform into a series of sine and/or cosine
waves at multiples of the fundamental frequency.
B. He created thermal interactions between free electrons and vibrating ions in a
ST
conductor.
C. The formula for calculating shot noise contributed for a complete transistor.
D. The relative measure of the desired signal power to the noise power.
13. Which of the following pieces of equipment would be considered advanced test
UV
equipment?
A. Digital multimeter (DMM)
B. Broadband oscilloscope
C. Spectrum analyzer
D. RF generator
IA
14. When troubleshooting, why would you perform voltage and resistance checks?
A. To check for signals
_A
B. To eliminate induced failures
C. To observe frequency spectra
D. To isolate defective components
15. Why would you use Friiss’s formula?
PP
A. To provide the overall noise effect of a multistage system.
B. To break down any periodic waveform into a series of sine and/or cosine waves at
multiples of the fundamental frequency.
C. To establish that different users can share bands of frequencies provided that each
RO
user was assigned exclusive use of a frequency range within that band.
D. To show how the construction of a square wave can be seen to be made up of a
number of sinusoids.
16. What does the graphical display produced by an oscilloscope represent?
VE
A. Signals in the frequency domain
B. Time-domain representation
C. Amplitude of each frequency component
D. Amplitude characteristics
D?
17. ____________ consists of a mixture of signals at all frequencies and at randomly
occurring amplitudes.
A. Decibel units
??
B. Frequency
C. Bandwidth
D. Noise
3
