WRT Certification
___ _____ is the temperature at which air becomes saturated with moisture and might keep no
extra water vapor. - ANS-Dew factor
_____ ________ is the force exerted via a fuel (vapor molecules) on the encompassing
surroundings. - ANS-Vapor stress
_______ represents the "become-wooden" fabric with the least engineering, and therefore the
maximum natural fiber bonding. It is _________ to swelling and delamination because of its
wooden veneer assemblies which can be glued below severe stress. - ANS-Plywood & resistant
________ ________ is described as the amount of moisture contained in an air pattern, in
comparison to the maximum amount the air ought to hold at that temperature. - ANS-Relative
humidity (RH)
___________ drying systems merge the benefits of each open and closed drying: the usage of
to be had, dry air from out of doors and the manage provided by using a closed system and
mechanical dehumidification. - ANS-Combination
___________ occurs whilst a stable modifications to a vapor (with out going through a liquid
segment.) - ANS-Sublimation
___________ takes place whilst liquid adjustments to a vapor. Occurs as power is expanded. -
ANS-Evaporation
____________ occurs while vapor changes to a liquid. Occurs as each is removed. -
ANS-Condensation
3 drying structures: - ANS-1. Open- deliberately the use of out of doors air
2. Closed- using mechanical dehumidification most effective
three. Combination- the use of outdoor air combined with mechanical dehumidification
A balanced drying system is carried out when the rate of dehumidification is more than or same
to the price of ___________. - ANS-evaporation
A thermo-hygrometer is used to screen any air that may have an impact on the ___________
and/or ________ ________ with a restorative drying surroundings. - ANS-temperature &
relative humidity
Abide by nearby ____ and regulations whilst disposing extracted water. Waste water is pleasant
disposed of right into a sanitary sewer. - ANS-laws
, After extra water has been extracted, the time needed to dry wet substances is determined
through the ____ __ ___________. - ANS-fee of evaporation
After safety issues had been addressed and the initial water supply has been stopped, the
restorer should complete an assessment of the water's migration through the shape. During this
manner, the restorer inspects all ___________ ________ areas. - ANS-doubtlessly affected
Air filtration devices (AFDs) are wanted in water healing paintings every time high level of
____________ are being brought to the air. - ANS-particulates
Airflow within the wall hollow space increases the charge of ___________ and allows the wall to
dry from each inner and out. - ANS-evaporation
All restorers have to comply with the standard of take care of the water healing profession
advanced through the restoration industry entitled the IICRC ____. - ANS-S500
As moisture evaporates from a moist cloth, the floor of the fabric turns into ______ due to the
fact power is launched from the cloth. - ANS-cooler
As the water is rapidly evaporated, the water vapor is removed via ________________ or
___________. - ANS-dehumidification & ventilation
As with any contaminant, mildew must be removed or contained before any air movers are
located in the shape. Blowing air can spread mold spores from the ____________ location to
the __________ rooms. - ANS-contaminated & unaffected
Because desiccant dehumidifiers do now not use condensation to remove water, they are not
constrained by low dew point temperatures; consequently, they produce the lowest _____
________ of any dehumidifier. - ANS-vapor pressure
Because of their non-invasive nature and brief surveying talents, non-invasive meters are the
best tools for locating strange moisture at the back of and under finishing substances together
with _______ ____ and resilient _____ floor coverings. - ANS-ceramic tile & vinyl
Class 1 water intrusions contain the _____ amount of water absorption, with much less than _%
of the region surfaces being moist porous materials. - ANS-least & 5
Class 2 water intrusions contain a ___________ quantity of water absorption, with greater that
_% however much less than __% of location surfaces being moist porous materials. -
ANS-significant, five, & 40
Class three water intrusions involve the ________ amount of water absorption, with extra than
__% of vicinity surfaces being moist porous substances. - ANS-greatest & 40
___ _____ is the temperature at which air becomes saturated with moisture and might keep no
extra water vapor. - ANS-Dew factor
_____ ________ is the force exerted via a fuel (vapor molecules) on the encompassing
surroundings. - ANS-Vapor stress
_______ represents the "become-wooden" fabric with the least engineering, and therefore the
maximum natural fiber bonding. It is _________ to swelling and delamination because of its
wooden veneer assemblies which can be glued below severe stress. - ANS-Plywood & resistant
________ ________ is described as the amount of moisture contained in an air pattern, in
comparison to the maximum amount the air ought to hold at that temperature. - ANS-Relative
humidity (RH)
___________ drying systems merge the benefits of each open and closed drying: the usage of
to be had, dry air from out of doors and the manage provided by using a closed system and
mechanical dehumidification. - ANS-Combination
___________ occurs whilst a stable modifications to a vapor (with out going through a liquid
segment.) - ANS-Sublimation
___________ takes place whilst liquid adjustments to a vapor. Occurs as power is expanded. -
ANS-Evaporation
____________ occurs while vapor changes to a liquid. Occurs as each is removed. -
ANS-Condensation
3 drying structures: - ANS-1. Open- deliberately the use of out of doors air
2. Closed- using mechanical dehumidification most effective
three. Combination- the use of outdoor air combined with mechanical dehumidification
A balanced drying system is carried out when the rate of dehumidification is more than or same
to the price of ___________. - ANS-evaporation
A thermo-hygrometer is used to screen any air that may have an impact on the ___________
and/or ________ ________ with a restorative drying surroundings. - ANS-temperature &
relative humidity
Abide by nearby ____ and regulations whilst disposing extracted water. Waste water is pleasant
disposed of right into a sanitary sewer. - ANS-laws
, After extra water has been extracted, the time needed to dry wet substances is determined
through the ____ __ ___________. - ANS-fee of evaporation
After safety issues had been addressed and the initial water supply has been stopped, the
restorer should complete an assessment of the water's migration through the shape. During this
manner, the restorer inspects all ___________ ________ areas. - ANS-doubtlessly affected
Air filtration devices (AFDs) are wanted in water healing paintings every time high level of
____________ are being brought to the air. - ANS-particulates
Airflow within the wall hollow space increases the charge of ___________ and allows the wall to
dry from each inner and out. - ANS-evaporation
All restorers have to comply with the standard of take care of the water healing profession
advanced through the restoration industry entitled the IICRC ____. - ANS-S500
As moisture evaporates from a moist cloth, the floor of the fabric turns into ______ due to the
fact power is launched from the cloth. - ANS-cooler
As the water is rapidly evaporated, the water vapor is removed via ________________ or
___________. - ANS-dehumidification & ventilation
As with any contaminant, mildew must be removed or contained before any air movers are
located in the shape. Blowing air can spread mold spores from the ____________ location to
the __________ rooms. - ANS-contaminated & unaffected
Because desiccant dehumidifiers do now not use condensation to remove water, they are not
constrained by low dew point temperatures; consequently, they produce the lowest _____
________ of any dehumidifier. - ANS-vapor pressure
Because of their non-invasive nature and brief surveying talents, non-invasive meters are the
best tools for locating strange moisture at the back of and under finishing substances together
with _______ ____ and resilient _____ floor coverings. - ANS-ceramic tile & vinyl
Class 1 water intrusions contain the _____ amount of water absorption, with much less than _%
of the region surfaces being moist porous materials. - ANS-least & 5
Class 2 water intrusions contain a ___________ quantity of water absorption, with greater that
_% however much less than __% of location surfaces being moist porous materials. -
ANS-significant, five, & 40
Class three water intrusions involve the ________ amount of water absorption, with extra than
__% of vicinity surfaces being moist porous substances. - ANS-greatest & 40
