AFAB 110 EXAM SCRIPT 2026 FULL QUESTIONS
AND CORRECT ANSWERS ALREADY PASSED
◉ There are three dimension terms common to drafting education.
which of the following is not correct? Answer: Length
◉ The type of section view where the section view is no longer aligned
in projection with other views is:
A. removed
B. revolved
C. broken-out
D. offset Answer: offset
◉ Cylindrical object with an odd number of features, such as spokes or
holes on a bolt circle, could be better described with a ---- section.
Answer: Aligned
◉ The broken-out section requires another type of line from the alphabet
of lines to help show where the removed portion was broken off in a
jagged sort of way. this is the --- line. Answer: Short break
, ◉ When a --- section is created, it can be overlaid on the view or short
break lines can be used on each side of th e view to seperate it from the
other visible lines. Answer: Revolved
◉ Type of section wherein the section view is probably located out of
projection with the other regular or auxiliary views is a --- section.
Answer: Removed
◉ There is a conventional practice that allows the drafter to leave a
feature unhatched, even though the cutting-plane line passes through it.
Which of the following is not relevent to this conventional practice?
Answer: Hole
◉ If there is a large area that needs to receive section lines, the ____
section allows for the section lines to only be applied around the
perimeter. Answer: outline
◉ In assembly drawings, there may be some parts that do not receive
section lines, but rather the area cut by the cutting-plane line is filled-in
solid. Which of the following is not relevant to this conventional
practice? Answer: Springs
◉ T/F each type of line in the standards has one, and only one, option
for its appearance. Answer: False
AND CORRECT ANSWERS ALREADY PASSED
◉ There are three dimension terms common to drafting education.
which of the following is not correct? Answer: Length
◉ The type of section view where the section view is no longer aligned
in projection with other views is:
A. removed
B. revolved
C. broken-out
D. offset Answer: offset
◉ Cylindrical object with an odd number of features, such as spokes or
holes on a bolt circle, could be better described with a ---- section.
Answer: Aligned
◉ The broken-out section requires another type of line from the alphabet
of lines to help show where the removed portion was broken off in a
jagged sort of way. this is the --- line. Answer: Short break
, ◉ When a --- section is created, it can be overlaid on the view or short
break lines can be used on each side of th e view to seperate it from the
other visible lines. Answer: Revolved
◉ Type of section wherein the section view is probably located out of
projection with the other regular or auxiliary views is a --- section.
Answer: Removed
◉ There is a conventional practice that allows the drafter to leave a
feature unhatched, even though the cutting-plane line passes through it.
Which of the following is not relevent to this conventional practice?
Answer: Hole
◉ If there is a large area that needs to receive section lines, the ____
section allows for the section lines to only be applied around the
perimeter. Answer: outline
◉ In assembly drawings, there may be some parts that do not receive
section lines, but rather the area cut by the cutting-plane line is filled-in
solid. Which of the following is not relevant to this conventional
practice? Answer: Springs
◉ T/F each type of line in the standards has one, and only one, option
for its appearance. Answer: False
