ACI STRENGTH EXAM STUDY SHEET 2026
QUESTIONS WITH 100% CORRECT
ANSWERS
⩥ providing plane surfaces Answer: This practice describes procedure
for_____ ________ _______ on the ends of freshly molded concrete
cylinders.
⩥ 6mm 11mm 75mm Answer: How thick should glass, metal,
granite/diabase capping plates be when when capping is performed?
⩥ 12mm or 1/2inch Answer: What is the depth of the recessed area that
receives the molten sulfur?
⩥ 25 mm / 1 in - .05 mm/.002 in 150 mm/6in Answer: In all cases,
plates shall be at least _____, greater in diameter than the test specimen
and the working surfaces shall not depart from a plane by more
than________ _________________
⩥ axis, .5 degree,2mm/1/16in Answer: Suitable alignment devices, such
as guide bars or bull's eye levels shall be used in conjunction with
capping plates to ensure that no single cap will depart from
perpendicularity to the ____ of a cylindrical specimen by more than
________ and that no cap will be off centered on a specimen by more
than _________
QUESTIONS WITH 100% CORRECT
ANSWERS
⩥ providing plane surfaces Answer: This practice describes procedure
for_____ ________ _______ on the ends of freshly molded concrete
cylinders.
⩥ 6mm 11mm 75mm Answer: How thick should glass, metal,
granite/diabase capping plates be when when capping is performed?
⩥ 12mm or 1/2inch Answer: What is the depth of the recessed area that
receives the molten sulfur?
⩥ 25 mm / 1 in - .05 mm/.002 in 150 mm/6in Answer: In all cases,
plates shall be at least _____, greater in diameter than the test specimen
and the working surfaces shall not depart from a plane by more
than________ _________________
⩥ axis, .5 degree,2mm/1/16in Answer: Suitable alignment devices, such
as guide bars or bull's eye levels shall be used in conjunction with
capping plates to ensure that no single cap will depart from
perpendicularity to the ____ of a cylindrical specimen by more than
________ and that no cap will be off centered on a specimen by more
than _________
