ACI STRENGTH EXAM STUDY GUIDE 2026
QUESTIONS AND ANSWERS 100% VERIFIED
⩥ Equipment for sulfur-mortar caps. Answer: Same plates as neat
cement but the recessed area shall not be deeper than 12 mm
⩥ Plate diameter. Answer: In all cases the plate diameter shall be at least
25 mm greater than the specimen diameter
⩥ Plate surface when new. Answer: Shall be free of gouges grooves or
indentations beyond those caused by the finishing operation
⩥ Cap must not depart from perpendicularity of the axis of the specimen
by.... Answer: More than 0.5 degrees
⩥ Melting pots for sulfur mortar. Answer: Shall have automatic
temperature controls, shall be made of metal or lined with a material that
is non-reactive
Shall be used in a hood to exhaust the fumes to outdoors
⩥ 3.5 - 50 MPa requires an average cap thickness of.... Answer: 6 mm
QUESTIONS AND ANSWERS 100% VERIFIED
⩥ Equipment for sulfur-mortar caps. Answer: Same plates as neat
cement but the recessed area shall not be deeper than 12 mm
⩥ Plate diameter. Answer: In all cases the plate diameter shall be at least
25 mm greater than the specimen diameter
⩥ Plate surface when new. Answer: Shall be free of gouges grooves or
indentations beyond those caused by the finishing operation
⩥ Cap must not depart from perpendicularity of the axis of the specimen
by.... Answer: More than 0.5 degrees
⩥ Melting pots for sulfur mortar. Answer: Shall have automatic
temperature controls, shall be made of metal or lined with a material that
is non-reactive
Shall be used in a hood to exhaust the fumes to outdoors
⩥ 3.5 - 50 MPa requires an average cap thickness of.... Answer: 6 mm
