FEX Seattle Study guide Most Recent exam
COMPLETE (2025) EXAM Questions and Answers
(Verified Answers) (Latest Update 2025) UPDATE!!
Save
Terms in this set (56)
General labeling types for ANSI/UL626 and CAN/ULC-S507
water based extinguishers
Extinguishers 1/1/1986
manufactured prior to
what date are not required
to have as strict of
labeling standards?
(Labeling code 4.1.2)
Soda acid, chemical foam, vaporizing liquids,
cartridge operated water, cartridge operated loaded
Obsolete Extinguishers
stream, copper or brass shell joined by soft solder or
rivets, Carbon dioxide with metal horns
What type of hazard is it Light Hazard
when Class A
combustibles and class B
flammables are low and
low rates of heat release
are to be expected?
https://quizlet.com/1095426854/fex-seattle-study-guide-most-recent-exam-complete-2025-exam-questions-and-answers-verified-answers-latest-updat… 1/9
, 10/20/25, 11:41 AM FEX Seattle Study guide Most Recent exam COMPLETE (2025) EXAM Questions and Answers (Verified Answers) (Latest Updat…
What type of hazard is it Ordinary Hazard
when Class A
combustibles and class B
flammables are moderate
and fires of moderate
rates of heat release are
to be expected?
What type of hazard is it Extra Hazard
when Class A
combustibles and class B
flammables are are in high
amounts. and high rates of
heat release are to be
expected?
Three Dimensional Fires Large capacity dry chemical extinguisher capable of
should be protected by discharging at a rate of a pound per second
what?
What type of extinguishers Water types
should be the only type in
areas containing oxidizers,
such as pool chemicals?
Extinguishers shall be True
located along normal
paths of travel,
INCLUDING exits. True or
False?
FE's weighing less than 5 ft
40lb should be installed
so that the top of device is
no more than how far
from the ground?
https://quizlet.com/1095426854/fex-seattle-study-guide-most-recent-exam-complete-2025-exam-questions-and-answers-verified-answers-latest-updat… 2/9