Basic Firefighter Written Exam:
Review |
Comprehensive Test Questions
and Verified Answers | 100%
Correct | Grade A (Newest
Update)
Quiz_________________?
When using a rotary saw, start all cuts at RPM to prevent blades from binding into the
material. -
Answer☑️
maximum
Quiz_________________?
Is an example of a common prying tool. -
Answer☑️
Halligan
Quiz_________________?
An swinging door is indicated by the hinges being visible. -
Answer☑️
outward
Quiz_________________?
Is an example of a pulling tool. -
Answer☑️
sheetrock rake
Quiz_________________?
The Halligan and the Flat Head Axe are commonly paired together as 'irons'. -
Answer☑️
Quiz_________________?
1
, When breaking glass, stand up-wind, use the blunt/flat side of the tool and strike the
corner of the pane. -
Answer☑️
Quiz_________________?
When getting a power tool from an apparatus for use on the fire ground, immediately
start the tool, turn off the tool after warming the tool, and then carry the tool to where it
will be used. -
Answer☑️
Quiz_________________?
A sledge hammer is an example of a striking tool. -
Answer☑️
Quiz_________________?
A reciprocating saw (Sawzall) is an example of a cutting tool. -
Answer☑️
Quiz_________________?
When forcing entry through chained gates, you should cut the link/chain and not the
lock. -
Answer☑️
Quiz_________________?
What is the Order of Priorities When Suppressing Structure Fires? -
Answer☑️
1. Protect Exposures
2. Cut Off Fire Spread
3. Attack Seat of the Fire
Quiz_________________?
When Advancing a Hose-line into a Structure, Extinguish Any Fire That is Visible and -
Answer☑️
Accessible
Quiz_________________?
A Vehicle Fire Should be Fought from a Degree Angle. -
Answer☑️
45
2
, Quiz_________________?
If You Are Advancing an Attack Line into a Structure and CANNOT See Your Feet, You
Should -
Answer☑️
Crawl
Quiz_________________?
What are the Appropriate Hose Sizes for Attacking a Structure Fire? -
Answer☑️
2 1/2 and 1 3/4
Quiz_________________?
Directing Fire Streams Toward the Ceiling or Wall of a Room or Building in Order to
Generate Large Amount of Steam is an Attack -
Answer☑️
Indirect
Quiz_________________?
At a Structure Fire, the Highest Priority are Close Priority Fuel Tanks and Propane
Cylinders -
Answer☑️
Exposures
Quiz_________________?
A Attack is Discharging Water or Foam Directly onto a Burning Material -
Answer☑️
Direct
Quiz_________________?
When Extinguishing a Container Fire You Should Never Approach from Downhill or -
Answer☑️
Downwind
Quiz_________________?
You Should First Direct Your Fire Stream at the During a Combination Fire Attack -
Answer☑️
Ceiling
Quiz_________________?
The process of hauling water from a fill site to a dump site is known as -
Answer☑️
water shuttle
Quiz_________________?
Hydrants installed in areas with prolonged subfreezing weather are called -
3
Review |
Comprehensive Test Questions
and Verified Answers | 100%
Correct | Grade A (Newest
Update)
Quiz_________________?
When using a rotary saw, start all cuts at RPM to prevent blades from binding into the
material. -
Answer☑️
maximum
Quiz_________________?
Is an example of a common prying tool. -
Answer☑️
Halligan
Quiz_________________?
An swinging door is indicated by the hinges being visible. -
Answer☑️
outward
Quiz_________________?
Is an example of a pulling tool. -
Answer☑️
sheetrock rake
Quiz_________________?
The Halligan and the Flat Head Axe are commonly paired together as 'irons'. -
Answer☑️
Quiz_________________?
1
, When breaking glass, stand up-wind, use the blunt/flat side of the tool and strike the
corner of the pane. -
Answer☑️
Quiz_________________?
When getting a power tool from an apparatus for use on the fire ground, immediately
start the tool, turn off the tool after warming the tool, and then carry the tool to where it
will be used. -
Answer☑️
Quiz_________________?
A sledge hammer is an example of a striking tool. -
Answer☑️
Quiz_________________?
A reciprocating saw (Sawzall) is an example of a cutting tool. -
Answer☑️
Quiz_________________?
When forcing entry through chained gates, you should cut the link/chain and not the
lock. -
Answer☑️
Quiz_________________?
What is the Order of Priorities When Suppressing Structure Fires? -
Answer☑️
1. Protect Exposures
2. Cut Off Fire Spread
3. Attack Seat of the Fire
Quiz_________________?
When Advancing a Hose-line into a Structure, Extinguish Any Fire That is Visible and -
Answer☑️
Accessible
Quiz_________________?
A Vehicle Fire Should be Fought from a Degree Angle. -
Answer☑️
45
2
, Quiz_________________?
If You Are Advancing an Attack Line into a Structure and CANNOT See Your Feet, You
Should -
Answer☑️
Crawl
Quiz_________________?
What are the Appropriate Hose Sizes for Attacking a Structure Fire? -
Answer☑️
2 1/2 and 1 3/4
Quiz_________________?
Directing Fire Streams Toward the Ceiling or Wall of a Room or Building in Order to
Generate Large Amount of Steam is an Attack -
Answer☑️
Indirect
Quiz_________________?
At a Structure Fire, the Highest Priority are Close Priority Fuel Tanks and Propane
Cylinders -
Answer☑️
Exposures
Quiz_________________?
A Attack is Discharging Water or Foam Directly onto a Burning Material -
Answer☑️
Direct
Quiz_________________?
When Extinguishing a Container Fire You Should Never Approach from Downhill or -
Answer☑️
Downwind
Quiz_________________?
You Should First Direct Your Fire Stream at the During a Combination Fire Attack -
Answer☑️
Ceiling
Quiz_________________?
The process of hauling water from a fill site to a dump site is known as -
Answer☑️
water shuttle
Quiz_________________?
Hydrants installed in areas with prolonged subfreezing weather are called -
3
