Code, Standards, and Practices 2, Level I-2020
Lesson 2: Branch Circuits I Exam fully solved &
updated (latest version verified for accuracy) |
Latest!!
Save
Terms in this set (33)
A branch circuit is defined True
as " The circuit conductors
between the final
overcurrent device
protecting the circuit and
the outlet(s) T/F
A feeder is defined in the True
NEC as " All circuit
conductors between the
service equipment, the
source of a separately
derived system, or other
power supply source and
the final branch circuit
overcurrent device"
T/F
, A continuous load is 3 hours
where the maximum
current is expected to
continue for ? Or more
a.
1 hour
b.
2 hours
c.
3 hours
d.
4 hours
A branch circuit that General purpose branch circuit
supplies four lighting
outlets and eight
receptacle outlets would
be classified as a(n)
a.
appliance branch circuit
b.
general-purpose branch
circuit
c.
individual branch circuit
d.
multiwire branch circuit
Lesson 2: Branch Circuits I Exam fully solved &
updated (latest version verified for accuracy) |
Latest!!
Save
Terms in this set (33)
A branch circuit is defined True
as " The circuit conductors
between the final
overcurrent device
protecting the circuit and
the outlet(s) T/F
A feeder is defined in the True
NEC as " All circuit
conductors between the
service equipment, the
source of a separately
derived system, or other
power supply source and
the final branch circuit
overcurrent device"
T/F
, A continuous load is 3 hours
where the maximum
current is expected to
continue for ? Or more
a.
1 hour
b.
2 hours
c.
3 hours
d.
4 hours
A branch circuit that General purpose branch circuit
supplies four lighting
outlets and eight
receptacle outlets would
be classified as a(n)
a.
appliance branch circuit
b.
general-purpose branch
circuit
c.
individual branch circuit
d.
multiwire branch circuit
