Power engineering 2A1
PrACTiCe eXAM QUeSTionS wiTH
CorreCT DeTAiLeD AnSwerS |
ALreADY grADeD A+<reCenT
verSion>
1) Common Law - ANSWER What type of law is created by the courts where
legislation does not exist?
2) Peace, Order and Good Government of Canada - ANSWER In reference to powers
being given to the federal Parliament, what does POGG stand for?
3) Constitution - ANSWER The structure of the Canadian Legal System is
established by what body?
4) Damages - ANSWER In reference to a civil action, emotional distress is
considered an example of what?
5) National Concerns Test - ANSWER Which test, giving the federal government
POGG power in a matter was used in deciding about jurisdiction with respect to
aeronautics (air travel)?
6) The safety officer (inspector) and the employer - ANSWER If the appropriate
factors can be determined to link a safety officer (inspector) under the Boiler and
Pressure Vessels Act to a case of negligence, who would be held liable?
7) Government affairs - ANSWER According to the Supreme Court of Canada, what
does the Canadian Charter of Rights and Freedoms apply to?
,8) QB - ANSWER Which part of the ASME code that covers welding and brazing
qualifications covers brazing?
9) Beyond a person's power or authority - ANSWER What does the legal term Ultra
vires mean?
10) TRUE - ANSWER ASME B31.3 states that it is the owner's responsibility to
decide which code is most applicable to their piping system.
11) Constitution Act, 1982 - ANSWER Which Act contains the Canadian Charter of
Rights and Freedoms?
12) 1982 - ANSWER When was the Canadian Charter of Rights and Freedoms
introduced into the Canadian Constitution?
13) Statutory Delegates - ANSWER The statement "Innovation and experimentation in
solving social problems may not be possible if legislation is required" is rationale for
what?
14) Constitutional law - ANSWER There are four main types of law that are of interest
to safety services and Power Engineering personnel. Which of these is the law as it
relates to relationships between the various legal components that exist in Canada?
15) Statutory Delegates - ANSWER The statement "Many government activities are
technical in nature, and legislation should contain only broad principles" is rationale
for what?
16) Standard of Care - ANSWER The level of skill that is shown by a reasonable
safety officer (inspector) with similar experience and training is considered an
example of which of these?
17) Subordinate - ANSWER What type of legislation is delegated to an inferior body?
,18) Constitution Act, 1867 - ANSWER The power over the administration of justice in
the provinces is given to the provinces by what authority?
19) Each province - ANSWER The adoption of codes and standards is the
responsibility of:
20) Boiler and Pressure Vessels Regulations - ANSWER The requirements for
registration of the design of a boiler, pressure vessel, fitting or pressure piping system
is included in which of the following regulations?
21) government intervention in the economy - ANSWER Which phrase correctly
finishes this statement? Regulations are a form of _______.
22) Criminal law - ANSWER There are four main types of law that are of interest to
safety services and Power Engineering personnel. Which of these is concerned with
the rights and duties enjoyed by the subject in connection with the state? (Gall, 25)"
23) Primary - ANSWER The "Boiler and Pressure Vessels Act" is what type of
legislation?
24) Parliament of Canada - ANSWER Who has the power to establish the Supreme
Court of Canada?
25) To maintain the integrity of pressure-retaining items after they have been placed into
service. - ANSWER What is the purpose of the National Board Inspection Code
(NBIC) ANSI/NB-23?
26) Enabling act - ANSWER The "Boiler and Pressure Vessels Act" is what kind of
act?
27) Each jurisdiction has different penalties - ANSWER The Boilers and Pressure
Vessels Act sets out the penalties that may be imposed on a person who is guilty of an
offence under an act. How are the penalties set?
, 28) ASME Section IX - ANSWER Every welding or brazing procedure, procedure
qualification, and performance test shall conform to, or be the equivalent of those
specified in:
29) Quasi criminal/regulatory law - ANSWER There are four main types of law that
are of interest to safety services and Power Engineering personnel. Which of these
includes a variety of laws ranging from the federal Narcotics Control Act to provincial
acts, such as the Boilers and Pressure Vessels Act, Alberta's Safety Codes Act, and
B.C.'s Safety Standards Act?
30) Standard of Care - ANSWER In reference to a civil action, the reasonable man
principle is considered an example of what?
31) MSS SP-25 - ANSWER Which of the listed standards or codes covers Standard
Marking System for Valves, Fittings, Flanges and Unions?
32) Boiler and Pressure Vessel Code; Section VI - ANSWER Which ASME standard
covers the recommended Rules for the Care and Operation of Heating Boilers?
33) Performance Specifications - ANSWER In a construction project, when would
pump, fan and turbine outputs be identified?
34) Design / Build Option - ANSWER Which of the project organization types has the
entire project done based on a final lump sum payment often made after performance
runs?
35) General plant design and physical size - ANSWER What information is usually
necessary to gain various government initial approvals for the construction of a plant?
36) Canadian Standards Association - ANSWER With regards to pressure equipment
standards and codes, what does CSA standard for?
37) ANSI K61.1 - ANSWER Which of the listed standards or codes covers Safety
Requirements for the Storage and Handling of Anhydrous Ammonia?
PrACTiCe eXAM QUeSTionS wiTH
CorreCT DeTAiLeD AnSwerS |
ALreADY grADeD A+<reCenT
verSion>
1) Common Law - ANSWER What type of law is created by the courts where
legislation does not exist?
2) Peace, Order and Good Government of Canada - ANSWER In reference to powers
being given to the federal Parliament, what does POGG stand for?
3) Constitution - ANSWER The structure of the Canadian Legal System is
established by what body?
4) Damages - ANSWER In reference to a civil action, emotional distress is
considered an example of what?
5) National Concerns Test - ANSWER Which test, giving the federal government
POGG power in a matter was used in deciding about jurisdiction with respect to
aeronautics (air travel)?
6) The safety officer (inspector) and the employer - ANSWER If the appropriate
factors can be determined to link a safety officer (inspector) under the Boiler and
Pressure Vessels Act to a case of negligence, who would be held liable?
7) Government affairs - ANSWER According to the Supreme Court of Canada, what
does the Canadian Charter of Rights and Freedoms apply to?
,8) QB - ANSWER Which part of the ASME code that covers welding and brazing
qualifications covers brazing?
9) Beyond a person's power or authority - ANSWER What does the legal term Ultra
vires mean?
10) TRUE - ANSWER ASME B31.3 states that it is the owner's responsibility to
decide which code is most applicable to their piping system.
11) Constitution Act, 1982 - ANSWER Which Act contains the Canadian Charter of
Rights and Freedoms?
12) 1982 - ANSWER When was the Canadian Charter of Rights and Freedoms
introduced into the Canadian Constitution?
13) Statutory Delegates - ANSWER The statement "Innovation and experimentation in
solving social problems may not be possible if legislation is required" is rationale for
what?
14) Constitutional law - ANSWER There are four main types of law that are of interest
to safety services and Power Engineering personnel. Which of these is the law as it
relates to relationships between the various legal components that exist in Canada?
15) Statutory Delegates - ANSWER The statement "Many government activities are
technical in nature, and legislation should contain only broad principles" is rationale
for what?
16) Standard of Care - ANSWER The level of skill that is shown by a reasonable
safety officer (inspector) with similar experience and training is considered an
example of which of these?
17) Subordinate - ANSWER What type of legislation is delegated to an inferior body?
,18) Constitution Act, 1867 - ANSWER The power over the administration of justice in
the provinces is given to the provinces by what authority?
19) Each province - ANSWER The adoption of codes and standards is the
responsibility of:
20) Boiler and Pressure Vessels Regulations - ANSWER The requirements for
registration of the design of a boiler, pressure vessel, fitting or pressure piping system
is included in which of the following regulations?
21) government intervention in the economy - ANSWER Which phrase correctly
finishes this statement? Regulations are a form of _______.
22) Criminal law - ANSWER There are four main types of law that are of interest to
safety services and Power Engineering personnel. Which of these is concerned with
the rights and duties enjoyed by the subject in connection with the state? (Gall, 25)"
23) Primary - ANSWER The "Boiler and Pressure Vessels Act" is what type of
legislation?
24) Parliament of Canada - ANSWER Who has the power to establish the Supreme
Court of Canada?
25) To maintain the integrity of pressure-retaining items after they have been placed into
service. - ANSWER What is the purpose of the National Board Inspection Code
(NBIC) ANSI/NB-23?
26) Enabling act - ANSWER The "Boiler and Pressure Vessels Act" is what kind of
act?
27) Each jurisdiction has different penalties - ANSWER The Boilers and Pressure
Vessels Act sets out the penalties that may be imposed on a person who is guilty of an
offence under an act. How are the penalties set?
, 28) ASME Section IX - ANSWER Every welding or brazing procedure, procedure
qualification, and performance test shall conform to, or be the equivalent of those
specified in:
29) Quasi criminal/regulatory law - ANSWER There are four main types of law that
are of interest to safety services and Power Engineering personnel. Which of these
includes a variety of laws ranging from the federal Narcotics Control Act to provincial
acts, such as the Boilers and Pressure Vessels Act, Alberta's Safety Codes Act, and
B.C.'s Safety Standards Act?
30) Standard of Care - ANSWER In reference to a civil action, the reasonable man
principle is considered an example of what?
31) MSS SP-25 - ANSWER Which of the listed standards or codes covers Standard
Marking System for Valves, Fittings, Flanges and Unions?
32) Boiler and Pressure Vessel Code; Section VI - ANSWER Which ASME standard
covers the recommended Rules for the Care and Operation of Heating Boilers?
33) Performance Specifications - ANSWER In a construction project, when would
pump, fan and turbine outputs be identified?
34) Design / Build Option - ANSWER Which of the project organization types has the
entire project done based on a final lump sum payment often made after performance
runs?
35) General plant design and physical size - ANSWER What information is usually
necessary to gain various government initial approvals for the construction of a plant?
36) Canadian Standards Association - ANSWER With regards to pressure equipment
standards and codes, what does CSA standard for?
37) ANSI K61.1 - ANSWER Which of the listed standards or codes covers Safety
Requirements for the Storage and Handling of Anhydrous Ammonia?
