Summary METAL COILS ENDORSEMENT NYS
EXAM|| NEW YORK’S METAL COILS
ENDORSEMENT EXAM ALL 80 QUESTIONS
AND CORRECT ANSWERS|| LATEST AND
VERIFIED UPDATE FULLY COVERED||
ASSURED PASS!!!
What types of commercial vehicles are required to comply with the cargo securement
regulations?
Ans: trucks, truck tractors, semi-trailers, full trailers and tractor-pole trailers with a gross
vehicle weight rating of more than 10,000 lbs.
Quiz What is the minimum amount of force that a cargo securement system should be
expected to withstand when traveling on a curve, ramp or when changing lanes?
Ans: The minimum side-to-side or lateral force = 50% of the cargo weight when traveling on a
curve or ramp, changing lanes or turning.
, Quiz If an aluminum coil weighs 12,000 lbs., the load securement must provide 6,000 lbs. of
securement to prevent movement in the rearward direction. How is this performance criteria
expressed in terms of gravity ("g")?
Ans: 0.5 g.
Quiz What is the definition of Working Load Limit (WLL)?
Ans: The maximum load that may be applied to a component of a cargo securement system
during normal service; it is usually assigned by the manufacturer of the component.
Quiz As required by state and federal regulations, who is responsible for proper load
securement?
Ans: The motor carrier and driver.
Quiz A driver is required to check the cargo and its securing devices within how many miles
after beginning a trip?
Ans: 50 Miles
Quiz What is the maximum working load limit of a binder with a handle marked "3/8-G7, 7/16-
G43"?
Ans: A. 3/8-G7 = 6,600 lbs.
B. 7/16-G43 = 7,200 lbs.
EXAM|| NEW YORK’S METAL COILS
ENDORSEMENT EXAM ALL 80 QUESTIONS
AND CORRECT ANSWERS|| LATEST AND
VERIFIED UPDATE FULLY COVERED||
ASSURED PASS!!!
What types of commercial vehicles are required to comply with the cargo securement
regulations?
Ans: trucks, truck tractors, semi-trailers, full trailers and tractor-pole trailers with a gross
vehicle weight rating of more than 10,000 lbs.
Quiz What is the minimum amount of force that a cargo securement system should be
expected to withstand when traveling on a curve, ramp or when changing lanes?
Ans: The minimum side-to-side or lateral force = 50% of the cargo weight when traveling on a
curve or ramp, changing lanes or turning.
, Quiz If an aluminum coil weighs 12,000 lbs., the load securement must provide 6,000 lbs. of
securement to prevent movement in the rearward direction. How is this performance criteria
expressed in terms of gravity ("g")?
Ans: 0.5 g.
Quiz What is the definition of Working Load Limit (WLL)?
Ans: The maximum load that may be applied to a component of a cargo securement system
during normal service; it is usually assigned by the manufacturer of the component.
Quiz As required by state and federal regulations, who is responsible for proper load
securement?
Ans: The motor carrier and driver.
Quiz A driver is required to check the cargo and its securing devices within how many miles
after beginning a trip?
Ans: 50 Miles
Quiz What is the maximum working load limit of a binder with a handle marked "3/8-G7, 7/16-
G43"?
Ans: A. 3/8-G7 = 6,600 lbs.
B. 7/16-G43 = 7,200 lbs.
