Auvik Certification Exam Includes Accurate
And Verified Questions Covering Network
Monitoring, Configuration Managemen
SNMP Protocols, Topology Mapping, Alert
Configuration, And Performance Diagnostics Using Th
Platform WITH QUESTIONS AND WELL
ANSWERS 2025
You don't see a connection from your firewall to the internet cloud, what can you do?
- Manually create a ping check with your public IP address
- Add the connection manually on the Home Dashboard > All Internet
Connections if Auvik hasn't picked up a public IP address
- Check for a firewall rule that could be blocking the collector ---ANSWER----
Manually create a ping check with your public IP address
- Add the connection manually on the Home Dashboard > All Internet
Connections if Auvik hasn't picked up a public IP address
You can't manually change a device's type.
,- Auvik does not have the right community string for the device
- This is a device Auvik has never seen before ---ANSWER---- SNMP is not enabled on
- Auvik does not have the right community string for the device
- This is a device Auvik has never seen before
You can manually edit the interface mappings on the map.
Yes
No ---ANSWER---Yes
How will Auvik initially detect a device on a network?
- ICMP (Ping)
- By installing an agent onto the device
- Manually
- ARP entries ---ANSWER---ICMP (Ping)
What are the different collector types?
- OVA
- Bash installer
- Windows Service
- Probe ---ANSWER---- OVA
, SNMP is enabled on the device, but why isn't Auvik detecting it (shows a grey dash)?
- Community string isn't authenticating
- The device is not configured to allow SNMP polling from the collector's IP
- The firewall network interface doesn't have a rule to allow SNMP
- Routes aren't set up appropriately ---ANSWER---- The device is not configured to all
collector's IP.
- The firewall network interface doesn't have a rule to allow SNMP.
What is a common issue you may experience when installing the Windows Service?
- You can't install on a workstation.
- It uses up a lot of hard drive space and memory.
- The server is already running services on ports 21 and 69. ---ANSWER---- The server
on ports 21 and 69.
What subnet ranges should you not approve to scan?
- /8
- Any Public Network
- /24
- /26
And Verified Questions Covering Network
Monitoring, Configuration Managemen
SNMP Protocols, Topology Mapping, Alert
Configuration, And Performance Diagnostics Using Th
Platform WITH QUESTIONS AND WELL
ANSWERS 2025
You don't see a connection from your firewall to the internet cloud, what can you do?
- Manually create a ping check with your public IP address
- Add the connection manually on the Home Dashboard > All Internet
Connections if Auvik hasn't picked up a public IP address
- Check for a firewall rule that could be blocking the collector ---ANSWER----
Manually create a ping check with your public IP address
- Add the connection manually on the Home Dashboard > All Internet
Connections if Auvik hasn't picked up a public IP address
You can't manually change a device's type.
,- Auvik does not have the right community string for the device
- This is a device Auvik has never seen before ---ANSWER---- SNMP is not enabled on
- Auvik does not have the right community string for the device
- This is a device Auvik has never seen before
You can manually edit the interface mappings on the map.
Yes
No ---ANSWER---Yes
How will Auvik initially detect a device on a network?
- ICMP (Ping)
- By installing an agent onto the device
- Manually
- ARP entries ---ANSWER---ICMP (Ping)
What are the different collector types?
- OVA
- Bash installer
- Windows Service
- Probe ---ANSWER---- OVA
, SNMP is enabled on the device, but why isn't Auvik detecting it (shows a grey dash)?
- Community string isn't authenticating
- The device is not configured to allow SNMP polling from the collector's IP
- The firewall network interface doesn't have a rule to allow SNMP
- Routes aren't set up appropriately ---ANSWER---- The device is not configured to all
collector's IP.
- The firewall network interface doesn't have a rule to allow SNMP.
What is a common issue you may experience when installing the Windows Service?
- You can't install on a workstation.
- It uses up a lot of hard drive space and memory.
- The server is already running services on ports 21 and 69. ---ANSWER---- The server
on ports 21 and 69.
What subnet ranges should you not approve to scan?
- /8
- Any Public Network
- /24
- /26
