fanuc section 1 - robot operations UPDATED ACTUAL Questions and
CORRECT Answers
simultaneously
people
servo motors
helpful when determining the direction a robot will move
when jogging in WORLD
at the left of the LCD screen display
allows the operator to jog each joint individually, or a
combination of joints by pressing more than one jog key
, When prioritizing the safety of your robotic system, the
#1 consideration should always be
A) robot(s);
B) workpiece;
C) tooling;
D) people;
E) external devices
The controller contains the computer that operates
the robot. Which of the following is NOT housed
within the controller?
A) memory;
B) control circuitry;
C) operator controls;
D) servo motors
The 'right-hand rule' in a cartesian coordinate system
A) clearly defines a 2-dim space based on the x and y
axissystem
B) helpful when determining the direction a robot
willmove when jogging in WORLD
C) is a useful tool while jogging in the JOINT jog mode
D) is a selectable option which must be installed during
acold start
Status indicator lights indicate the current status of the
robot to an operator. These lights are located
A) at the left of the LCD screen display
B) at the base of the robot
C) in the center of the teach pendants LCD screen display
D) on the standard operator panel (SOP)
2/8
CORRECT Answers
simultaneously
people
servo motors
helpful when determining the direction a robot will move
when jogging in WORLD
at the left of the LCD screen display
allows the operator to jog each joint individually, or a
combination of joints by pressing more than one jog key
, When prioritizing the safety of your robotic system, the
#1 consideration should always be
A) robot(s);
B) workpiece;
C) tooling;
D) people;
E) external devices
The controller contains the computer that operates
the robot. Which of the following is NOT housed
within the controller?
A) memory;
B) control circuitry;
C) operator controls;
D) servo motors
The 'right-hand rule' in a cartesian coordinate system
A) clearly defines a 2-dim space based on the x and y
axissystem
B) helpful when determining the direction a robot
willmove when jogging in WORLD
C) is a useful tool while jogging in the JOINT jog mode
D) is a selectable option which must be installed during
acold start
Status indicator lights indicate the current status of the
robot to an operator. These lights are located
A) at the left of the LCD screen display
B) at the base of the robot
C) in the center of the teach pendants LCD screen display
D) on the standard operator panel (SOP)
2/8
