Ammo Cdc Set B (2025–2026) – Complete
Exam Questions & Answers With
Rationales,
What are the classifications of pyrotechnics? - correctXanswer-
Illuminants, signals, combinations of signals and illuminants, and simulators.
What type of explosive is loaded in the projectile of the 105 MM high explosive round? - correct answer-
Comp B.
When are nuclear weapons moved by convoy? -Xcorrect answer-Every time weapons are moved.
What piece of equipment must be used with the MHU-
110/M to prevent the trailer from becoming unstable while loading or unloading? - correct answer-
Stabilizer jack.
What substance is the filler for the M30 practice grenade? - correct answer-Black powder.
What is worn if there is a potential for injury from falling objects? - correct answer-Protective helmets.
What statement is not a benefit of off-axis delivery of the JDAM? - correct answer-
Provides increased weapons range.
Which statement about pintle hooks and their use in operations with nuclear weapons is not correct? -
correct answer-Original equipment pintle hook assemblies are not authorized.
When are unfuzed loaded weaponsXtransported on the tines of a forklift? - correct answer-
When the weapons body is strongXenough to prevent damage and is long enough to be transported safel
y.
An electric saw's blade must be operating at what speed before it contacts the material being cut? -
correct answer-Full.
,How far in front of an M18A1 mine do we consider inside the danger zone? - correct answer-
250 meters.
Which action is not an authorized method for securing loose chain assembly ends? - correct answer-
Wrap the loose ends around the tie-down device; tape to the device.
How do you extend the CGU-1/B strap? - correct answer-
Release the adjusting mechanism; pull the strap.
What should you do if the differential shift lever of the MB-4 aircraft towing tractor is difficult to shift? -
correct answer-
Drive forward or backward a short distance, stop the tractor, and attempt to shift the lever.
Which test set is called the common munitions built-in test/reprogramming equipment (CMBRE)? -
correct answer-AN/GYQ-79
When and where is the MK124 Mod 0 signal used? - correct answer-Day or night, land or sea use.
After final tighening of the cable-type load binder, verify... - correct answer-
Threads (more than one) are exposed inside the turnbuckle.
What is the MC-7 air compressor designed for? - correct answer-General maintenance.
After HCU-
6/E pallets are positioned on a rollerized trailer, what can you use to secure the pallets to the trailer? -
correct answer-MB-1 chain assemblies or tie-down straps.
The ADU-891, Adapter Group Computer Test Set, is used in conjunction with what test set? -
correct answer-AN/GYQ-79
In an electrically-
timed fuze, what component replaces the arming vanes used in mechanically timed fuzes? -
correct answer-Electric charging assembly.
, What are the basic components of an explosive train? - correct answer-
Detonator, booster, and a bursting charge.
Which signals are transmitted and received by the AIM-9M target detector? - correctXanswer-
Pulsed infrared (IR) energy.
What ensures the HCU-6/E pallets transfer smoothly from a rollerized trailer to an aircraft/K-loader? -
correct answer-An adjustable ramp.
What mortar has a short range and a small explosive charge? - correct answer-Light
What is the inspection cycle for the UALS replenisher? - correct answer-
Every 30 days when in use and annually when in storage.
Which component of the conveyor assembly transfers round into the aircraft gun feed system? -
correct answer-Universal aircraft interface unit.
Which component of the munitions assembly conveyor (MAC) is dissambled last? - correct answer-
Gantry.
Which component of the A/E32K-
3 MAC can be used as a forklift adapter to raise the gantry to full height? - correct answer-
Interface control board (ICB).
Which component allows the 30 MM armor-piercing round to achieve target penetration? -
correct answer-Depleted uranium penetrator.
In a bomb body, where is M905 fuze installed? - correct answer-The tail fuze well.
What components, minimum, make up a propulsion system? - correct answer-
Rocket motor and rocket motor igniter.
Exam Questions & Answers With
Rationales,
What are the classifications of pyrotechnics? - correctXanswer-
Illuminants, signals, combinations of signals and illuminants, and simulators.
What type of explosive is loaded in the projectile of the 105 MM high explosive round? - correct answer-
Comp B.
When are nuclear weapons moved by convoy? -Xcorrect answer-Every time weapons are moved.
What piece of equipment must be used with the MHU-
110/M to prevent the trailer from becoming unstable while loading or unloading? - correct answer-
Stabilizer jack.
What substance is the filler for the M30 practice grenade? - correct answer-Black powder.
What is worn if there is a potential for injury from falling objects? - correct answer-Protective helmets.
What statement is not a benefit of off-axis delivery of the JDAM? - correct answer-
Provides increased weapons range.
Which statement about pintle hooks and their use in operations with nuclear weapons is not correct? -
correct answer-Original equipment pintle hook assemblies are not authorized.
When are unfuzed loaded weaponsXtransported on the tines of a forklift? - correct answer-
When the weapons body is strongXenough to prevent damage and is long enough to be transported safel
y.
An electric saw's blade must be operating at what speed before it contacts the material being cut? -
correct answer-Full.
,How far in front of an M18A1 mine do we consider inside the danger zone? - correct answer-
250 meters.
Which action is not an authorized method for securing loose chain assembly ends? - correct answer-
Wrap the loose ends around the tie-down device; tape to the device.
How do you extend the CGU-1/B strap? - correct answer-
Release the adjusting mechanism; pull the strap.
What should you do if the differential shift lever of the MB-4 aircraft towing tractor is difficult to shift? -
correct answer-
Drive forward or backward a short distance, stop the tractor, and attempt to shift the lever.
Which test set is called the common munitions built-in test/reprogramming equipment (CMBRE)? -
correct answer-AN/GYQ-79
When and where is the MK124 Mod 0 signal used? - correct answer-Day or night, land or sea use.
After final tighening of the cable-type load binder, verify... - correct answer-
Threads (more than one) are exposed inside the turnbuckle.
What is the MC-7 air compressor designed for? - correct answer-General maintenance.
After HCU-
6/E pallets are positioned on a rollerized trailer, what can you use to secure the pallets to the trailer? -
correct answer-MB-1 chain assemblies or tie-down straps.
The ADU-891, Adapter Group Computer Test Set, is used in conjunction with what test set? -
correct answer-AN/GYQ-79
In an electrically-
timed fuze, what component replaces the arming vanes used in mechanically timed fuzes? -
correct answer-Electric charging assembly.
, What are the basic components of an explosive train? - correct answer-
Detonator, booster, and a bursting charge.
Which signals are transmitted and received by the AIM-9M target detector? - correctXanswer-
Pulsed infrared (IR) energy.
What ensures the HCU-6/E pallets transfer smoothly from a rollerized trailer to an aircraft/K-loader? -
correct answer-An adjustable ramp.
What mortar has a short range and a small explosive charge? - correct answer-Light
What is the inspection cycle for the UALS replenisher? - correct answer-
Every 30 days when in use and annually when in storage.
Which component of the conveyor assembly transfers round into the aircraft gun feed system? -
correct answer-Universal aircraft interface unit.
Which component of the munitions assembly conveyor (MAC) is dissambled last? - correct answer-
Gantry.
Which component of the A/E32K-
3 MAC can be used as a forklift adapter to raise the gantry to full height? - correct answer-
Interface control board (ICB).
Which component allows the 30 MM armor-piercing round to achieve target penetration? -
correct answer-Depleted uranium penetrator.
In a bomb body, where is M905 fuze installed? - correct answer-The tail fuze well.
What components, minimum, make up a propulsion system? - correct answer-
Rocket motor and rocket motor igniter.
