For any assistance email me @
AFAB 110 Final Comprehensive
Questions (Frequently Tested) with
VerifiedAnswers Graded A+
1. The word print can best be used the same as the word _____________: Drawing
2. In many cases, the print is also an important part of a _______________ in the
industrial setting.: Contract
3. The study of print reading is closely related to the study of _____________, the
general term for creating drawings of objects in technical fields.: Drafting 4. PDF is an
electronic file format that allows the user to share a drawing or image without giving
them the actual CAD data file. PDF stands for
__________________.: Portable Document Format
5.A voluntary guideline that establishes the method of representation for prints, as well
as other engineering practices, is a ________________.: Standard
6.Identify the line below that is fictitious.: Dotted line
, AFAB 110 Final Comprehensive Questions (Frequently Tested) with Verified Answers Grade
A+
Study online at https://quizlet.com/_hux511
.
7.Cutting-plane lines are easily identifiable due to the appearance of a(n)
___________ on each end of the line.: Arrowhead
8.Identify the line below that is to be drawn thick.: Cutting-plane line
9.The standardized list of line types, perhaps in the form of a chart, is defined in many
references as the ________________.: Alphabet of line
10. Print reading is the process of analyzing a print to obtain information. This task
involves two principal elements: visualization and _____________.: Interpretation 11. If
a D-size sheet of paper is properly cut, how many A-size sheets should result?: 8
12. For which of the following is least likely to be found on a basic parts list?: Finish 13. A
block that is important to read in the early stage of examining a print is the ___________
block, which helps determine if the print being observed is up-to-date.: Revision history
14. Which of the following is least likely to be found on a basic parts list?: Finish
15. The word that basically means "cut in half" is _______________.: Bisect
16. If a hexagon is inscribed within a circle, the diameter of the circle is equivalent to
the term __________.: Across-the-corners
AFAB 110 Final Comprehensive
Questions (Frequently Tested) with
VerifiedAnswers Graded A+
1. The word print can best be used the same as the word _____________: Drawing
2. In many cases, the print is also an important part of a _______________ in the
industrial setting.: Contract
3. The study of print reading is closely related to the study of _____________, the
general term for creating drawings of objects in technical fields.: Drafting 4. PDF is an
electronic file format that allows the user to share a drawing or image without giving
them the actual CAD data file. PDF stands for
__________________.: Portable Document Format
5.A voluntary guideline that establishes the method of representation for prints, as well
as other engineering practices, is a ________________.: Standard
6.Identify the line below that is fictitious.: Dotted line
, AFAB 110 Final Comprehensive Questions (Frequently Tested) with Verified Answers Grade
A+
Study online at https://quizlet.com/_hux511
.
7.Cutting-plane lines are easily identifiable due to the appearance of a(n)
___________ on each end of the line.: Arrowhead
8.Identify the line below that is to be drawn thick.: Cutting-plane line
9.The standardized list of line types, perhaps in the form of a chart, is defined in many
references as the ________________.: Alphabet of line
10. Print reading is the process of analyzing a print to obtain information. This task
involves two principal elements: visualization and _____________.: Interpretation 11. If
a D-size sheet of paper is properly cut, how many A-size sheets should result?: 8
12. For which of the following is least likely to be found on a basic parts list?: Finish 13. A
block that is important to read in the early stage of examining a print is the ___________
block, which helps determine if the print being observed is up-to-date.: Revision history
14. Which of the following is least likely to be found on a basic parts list?: Finish
15. The word that basically means "cut in half" is _______________.: Bisect
16. If a hexagon is inscribed within a circle, the diameter of the circle is equivalent to
the term __________.: Across-the-corners
