NFPA 1002 Questions and Answers |
Latest Version | 2025/2026 | Correct &
Verified
What is the primary purpose of performing a pre-trip inspection on a fire apparatus?
✔✔To ensure all mechanical systems are safe and operational before responding to an incident.
Why is checking engine oil levels important before operating a fire truck?
✔✔Low oil levels can cause engine damage or failure during operation.
What does NFPA 1002 require operators to verify regarding tires?
✔✔Proper inflation, tread condition, and absence of cuts or damage.
Why should the battery be inspected during a pre-trip check?
✔✔To ensure sufficient charge and proper electrical connections.
What is the purpose of checking fluid levels in hydraulic systems?
✔✔To maintain proper operation of pumps, aerial devices, and braking systems.
1
,How often should fire apparatus brakes be tested under NFPA 1002 standards?
✔✔During pre-trip inspection and at regular intervals during operation.
What is the main hazard of driving a fire apparatus with low coolant levels?
✔✔Overheating and potential engine failure.
Why is it important to test warning lights and sirens?
✔✔To ensure the apparatus can alert traffic and safely respond to emergencies.
What is the purpose of checking the fire pump pressure gauge before operation?
✔✔To verify the pump is ready to deliver the correct water pressure.
Why must operators know the weight distribution of a loaded fire apparatus?
✔✔To maintain vehicle stability and prevent rollovers.
What does the term “dead engine start” refer to in NFPA 1002 context?
✔✔Starting the engine from a completely off state during pre-trip inspection.
2
, Why is it important to inspect drive shafts and universal joints?
✔✔To prevent mechanical failure during vehicle operation.
How often should transmission fluid be checked according to NFPA 1002?
✔✔At least during every pre-trip inspection or per manufacturer’s recommendation.
What is the purpose of testing the parking brake on a fire apparatus?
✔✔To ensure the vehicle remains stationary when parked.
Why should operators inspect air brakes on an apparatus equipped with them?
✔✔To ensure proper brake operation and avoid air loss emergencies.
What is the significance of pump intake and discharge valves inspection?
✔✔To confirm valves operate smoothly and can control water flow during firefighting.
Why is checking belts and hoses on a fire apparatus engine necessary?
✔✔To prevent unexpected failure that could immobilize the vehicle.
3
Latest Version | 2025/2026 | Correct &
Verified
What is the primary purpose of performing a pre-trip inspection on a fire apparatus?
✔✔To ensure all mechanical systems are safe and operational before responding to an incident.
Why is checking engine oil levels important before operating a fire truck?
✔✔Low oil levels can cause engine damage or failure during operation.
What does NFPA 1002 require operators to verify regarding tires?
✔✔Proper inflation, tread condition, and absence of cuts or damage.
Why should the battery be inspected during a pre-trip check?
✔✔To ensure sufficient charge and proper electrical connections.
What is the purpose of checking fluid levels in hydraulic systems?
✔✔To maintain proper operation of pumps, aerial devices, and braking systems.
1
,How often should fire apparatus brakes be tested under NFPA 1002 standards?
✔✔During pre-trip inspection and at regular intervals during operation.
What is the main hazard of driving a fire apparatus with low coolant levels?
✔✔Overheating and potential engine failure.
Why is it important to test warning lights and sirens?
✔✔To ensure the apparatus can alert traffic and safely respond to emergencies.
What is the purpose of checking the fire pump pressure gauge before operation?
✔✔To verify the pump is ready to deliver the correct water pressure.
Why must operators know the weight distribution of a loaded fire apparatus?
✔✔To maintain vehicle stability and prevent rollovers.
What does the term “dead engine start” refer to in NFPA 1002 context?
✔✔Starting the engine from a completely off state during pre-trip inspection.
2
, Why is it important to inspect drive shafts and universal joints?
✔✔To prevent mechanical failure during vehicle operation.
How often should transmission fluid be checked according to NFPA 1002?
✔✔At least during every pre-trip inspection or per manufacturer’s recommendation.
What is the purpose of testing the parking brake on a fire apparatus?
✔✔To ensure the vehicle remains stationary when parked.
Why should operators inspect air brakes on an apparatus equipped with them?
✔✔To ensure proper brake operation and avoid air loss emergencies.
What is the significance of pump intake and discharge valves inspection?
✔✔To confirm valves operate smoothly and can control water flow during firefighting.
Why is checking belts and hoses on a fire apparatus engine necessary?
✔✔To prevent unexpected failure that could immobilize the vehicle.
3
