AMT MLT EXAM STUDY GUIDE/PRACTICE TEST WITH ALL
CORRECT & 100% VERIFIED ANSWERS|ALREADY GRADED A+
1. Beginning with the moment the specimen is collected Chain of
custody.
and transported to the laboratory, to the
analysis itself and the reporting of the results,
must be documented by a process known as
2. A process that monitors the accuracy and Quality control
repro- ducibility of results through the use
of control spec- imens.
3. Describes how close a test result is to the true value. Accuracy
4. The comparison of an instrument pathogens
measurement or reading to a known and
physical constant. manage
and handle
5. What category of bioterrorism agents has the medical
follow- ing characteristics? waste in a
These agents have the third-highest priority safe and
and in- clude emerging pathogens that could effective
be engineered for mass dissemination in the manner?
future because of avail- ability, ease of
production and dissemination?
6. Agents anthrax, botulism, plague, smallpox,
tu- laremia, filoviruses, and arenaviruses are
classified as
7. What regulation that became law in 1992,
requires that laboratories develop,
implement, and comply with a plan that
ensures the protective safety of laboratory
staff to potential infectious blood-borne
1/
49
,AMT MLT EXAM STUDY GUIDE/PRACTICE TEST WITH ALL
CORRECT & 100% VERIFIED ANSWERS|ALREADY GRADED A+
Calibration
Category A.
Category C
Occupational Exposure
to Bloodborne
Pathogens
8. Class C fire extinguishers are used for Electric equipment.
2/
49
,AMT MLT EXAM STUDY GUIDE/PRACTICE TEST WITH ALL
CORRECT & 100% VERIFIED ANSWERS|ALREADY GRADED A+
9. Agents brucellosis, epsilon toxin, food Category B.
contaminants, glanders, melioidosis,
psittacosis, Q fever, and ricin toxin are
classified as
10. Material Safety Data Sheets (MSDSs) are now called: Safety Data Sheets
11. The GHS brings with it a new chemical Pictograms
labeling stan- dard using .
12. All chemical manufacturers and 2015
distributors must comply with all of the
new provisions in the revised standards by
June 1 .
16
13. The new Safety Data Sheets (SDSs) will
require
specific sections, ensuring consistency in the
presen- tation of the information.
14. Reference materials about the individual chemical are Material
safety data sheet
provided by all chemical manufacturers and suppliers (MSDS).
by means of
15. For qualitative chemistry procedures and for Type I
most procedures done in hematology,
immunology, micro- biology, and other clinical
test areas, this type of water is suitable. This
type of water is used for general lab tests
that do not require Type I water.
16. How do you convert Celsius to Kelvin? Celsius plus 273
3/
49
, AMT MLT EXAM STUDY GUIDE/PRACTICE TEST WITH ALL
CORRECT & 100% VERIFIED ANSWERS|ALREADY GRADED A+
17. In the calculation of MCV = HCT x 10/ ? RBC
18. The objective that should never have oil used 40X objective
on it is the
4/
49
CORRECT & 100% VERIFIED ANSWERS|ALREADY GRADED A+
1. Beginning with the moment the specimen is collected Chain of
custody.
and transported to the laboratory, to the
analysis itself and the reporting of the results,
must be documented by a process known as
2. A process that monitors the accuracy and Quality control
repro- ducibility of results through the use
of control spec- imens.
3. Describes how close a test result is to the true value. Accuracy
4. The comparison of an instrument pathogens
measurement or reading to a known and
physical constant. manage
and handle
5. What category of bioterrorism agents has the medical
follow- ing characteristics? waste in a
These agents have the third-highest priority safe and
and in- clude emerging pathogens that could effective
be engineered for mass dissemination in the manner?
future because of avail- ability, ease of
production and dissemination?
6. Agents anthrax, botulism, plague, smallpox,
tu- laremia, filoviruses, and arenaviruses are
classified as
7. What regulation that became law in 1992,
requires that laboratories develop,
implement, and comply with a plan that
ensures the protective safety of laboratory
staff to potential infectious blood-borne
1/
49
,AMT MLT EXAM STUDY GUIDE/PRACTICE TEST WITH ALL
CORRECT & 100% VERIFIED ANSWERS|ALREADY GRADED A+
Calibration
Category A.
Category C
Occupational Exposure
to Bloodborne
Pathogens
8. Class C fire extinguishers are used for Electric equipment.
2/
49
,AMT MLT EXAM STUDY GUIDE/PRACTICE TEST WITH ALL
CORRECT & 100% VERIFIED ANSWERS|ALREADY GRADED A+
9. Agents brucellosis, epsilon toxin, food Category B.
contaminants, glanders, melioidosis,
psittacosis, Q fever, and ricin toxin are
classified as
10. Material Safety Data Sheets (MSDSs) are now called: Safety Data Sheets
11. The GHS brings with it a new chemical Pictograms
labeling stan- dard using .
12. All chemical manufacturers and 2015
distributors must comply with all of the
new provisions in the revised standards by
June 1 .
16
13. The new Safety Data Sheets (SDSs) will
require
specific sections, ensuring consistency in the
presen- tation of the information.
14. Reference materials about the individual chemical are Material
safety data sheet
provided by all chemical manufacturers and suppliers (MSDS).
by means of
15. For qualitative chemistry procedures and for Type I
most procedures done in hematology,
immunology, micro- biology, and other clinical
test areas, this type of water is suitable. This
type of water is used for general lab tests
that do not require Type I water.
16. How do you convert Celsius to Kelvin? Celsius plus 273
3/
49
, AMT MLT EXAM STUDY GUIDE/PRACTICE TEST WITH ALL
CORRECT & 100% VERIFIED ANSWERS|ALREADY GRADED A+
17. In the calculation of MCV = HCT x 10/ ? RBC
18. The objective that should never have oil used 40X objective
on it is the
4/
49
