Gypsum Construction Handbook| Questions and Answers 100% Correct| Latest

Gypsum Construction Handbook| Questions and Answers 100% Correct| Latest fastener should be used when 3/8", 1/2" and 5/8" single layer gypsum panels are attached to wood framing. A. 1-1/2" Type G bugle head B. 1-1/4" Type S bugle head C. 1-1/8" Type S bugle head D. 1-1/4" Type W bugle head D. 1-1/4" Type W bugle head pg 39 _____ is/are warning signs of fastener imperfections. A. Darkening B. Localized cracking C. Protrusion of the fasteners D. All of the above D. All of the above pg 370 Extended periods of _____ will discolor panel face paper. A. High humidity B. Low humidity C. Cold weather D. Strong sunlight D. Strong sunlight pg 355 3/8-inch gypsum panels are designed for framing centers up to _____. A. 24 inches B. 16 inches C. 20 inches D. 12 inches B. 16 inches pg 3 _____ is often caused by excessively fast drying of joint compounds. A. Loose panels B. Board sagging C. Joint cracking D. None of the above C. Joint cracking pg 370 Use _____ screw to connect 3/4 inch single-layer panels to steel studs. A. 1 inch Type S bugle head B. 1-1/8 inch Type S bugle head C. 1-1/4 inch Type S bugle head D. 2-1/4 inch Type S bugle head C. 1-1/4 inch Type S bugle head pg 38 Stack panels face up with ends resting on nominal 2" x 4" lumber and with center of the boards resting on floor, and allow to remain overnight or until they have