RVTI Level 1 Certification Exam Questions And Answers With
Verified Solu
tions 2025|2026 |
Updated
1. Propane, as extracted, Is odorless and
colorless
2. The device used on a propane tank to reduce pressure Regulator
is called a
3. The boiling point for propane is -44*F (-42*C)
4. A property of propane is that, when heated, it Expands
5. When an element or compound changes Vaporization
from the liquid phase to a vapor, it is
called
6. When working with propane systems, the most impor- Safety
tant factor to consider is
7. Propane is flammable, can explode with pressure, and Freeze skin
is able to
8. It is important to wear gloves when using Freeze the skin
propane because it can
9. When working with propane, it is important to wear Appropriate
gloves
10. To close a service valve on a propane tank, it is best to A hand
tighten the valve with
11. In a shop environment, always wear Safety glasses
12. When transporting or storing containers, always use A POL plug or
dust cap
13. Which service valve is mandatory in the RV industry? Type I OPD
1/
38
, RVTI Level 1 Certification Exam Questions And Answers With
Verified Solu
tions 2025|2026 |
Updated
14. What is now required to be part of ASME tanks but was OPD
not required prior to 1983?
2/
38
, RVTI Level 1 Certification Exam Questions And Answers With
Verified Solu
tions 2025|2026 |
Updated
15. The maximum allowable working pressure Data plate
on an ASME tank can be found on the
16. The most common securing methods for
Adjustable straps
cylinders include
and T-bars
17. Purging is necessary for New and
contaminated
containers
18. For purging, you must increase pressure by 15 psi and 5
is the total number of purgings required.
19. The tare weight of a cylinder is 19 pounds. 39 pounds; 80% level
The propane capacity is 20 pounds. To how
many pounds should the cylinder be filled
and to what level?
20. The relief valve will function if the pressure of the
com- 375 psi pressed air plus the pressure of the
propane meets or exceeds the relief valve setting
of
21. What can occur if a horizontal cylinder is not stored in Liquid
propane can enter
its proper position? the vapor system
22. Which of the following is NOT an appurtenance? Mounting bracket
23. Black or green connector knobs on Type 1 OPD service Flow rating
valves indicate
24. ASME tanks are usually bolted to The frame
3/
38
, RVTI Level 1 Certification Exam Questions And Answers With
Verified Solu
tions 2025|2026 |
Updated
25. On double cylinder assemblies, make sure The cylinder tray is at-
tached to the unit's frame
4/
38
Verified Solu
tions 2025|2026 |
Updated
1. Propane, as extracted, Is odorless and
colorless
2. The device used on a propane tank to reduce pressure Regulator
is called a
3. The boiling point for propane is -44*F (-42*C)
4. A property of propane is that, when heated, it Expands
5. When an element or compound changes Vaporization
from the liquid phase to a vapor, it is
called
6. When working with propane systems, the most impor- Safety
tant factor to consider is
7. Propane is flammable, can explode with pressure, and Freeze skin
is able to
8. It is important to wear gloves when using Freeze the skin
propane because it can
9. When working with propane, it is important to wear Appropriate
gloves
10. To close a service valve on a propane tank, it is best to A hand
tighten the valve with
11. In a shop environment, always wear Safety glasses
12. When transporting or storing containers, always use A POL plug or
dust cap
13. Which service valve is mandatory in the RV industry? Type I OPD
1/
38
, RVTI Level 1 Certification Exam Questions And Answers With
Verified Solu
tions 2025|2026 |
Updated
14. What is now required to be part of ASME tanks but was OPD
not required prior to 1983?
2/
38
, RVTI Level 1 Certification Exam Questions And Answers With
Verified Solu
tions 2025|2026 |
Updated
15. The maximum allowable working pressure Data plate
on an ASME tank can be found on the
16. The most common securing methods for
Adjustable straps
cylinders include
and T-bars
17. Purging is necessary for New and
contaminated
containers
18. For purging, you must increase pressure by 15 psi and 5
is the total number of purgings required.
19. The tare weight of a cylinder is 19 pounds. 39 pounds; 80% level
The propane capacity is 20 pounds. To how
many pounds should the cylinder be filled
and to what level?
20. The relief valve will function if the pressure of the
com- 375 psi pressed air plus the pressure of the
propane meets or exceeds the relief valve setting
of
21. What can occur if a horizontal cylinder is not stored in Liquid
propane can enter
its proper position? the vapor system
22. Which of the following is NOT an appurtenance? Mounting bracket
23. Black or green connector knobs on Type 1 OPD service Flow rating
valves indicate
24. ASME tanks are usually bolted to The frame
3/
38
, RVTI Level 1 Certification Exam Questions And Answers With
Verified Solu
tions 2025|2026 |
Updated
25. On double cylinder assemblies, make sure The cylinder tray is at-
tached to the unit's frame
4/
38
