BCSP - STSC EXAM UPDATED NEW!!
"seek opportuni es to be of construc ve service in civic affairs and work for the advancement
of the safety, health, and well-being of their community" is from ehat organiza ons Code of
Ethics? - Answers BCSP
which is the first choice of protec ng yourself if an armed suspect enters upur building? -
Answers Run
When being made aware of professional misconduct by a BCSP cer fica on, what should you
do? - Answers bring the misconduct to the BCSP and no fy them
which en ty should complete the annual inspec ons of wite-strand rope? - Answers qualified
person
Which type of working pla)orm is built using rigid, load-bearing members, such as poles, legs,
frames, and outriggers? - Answers Supported
When designing a fall arrest system, the use of locking carabiners and snap hooks that require
two separate forces to be opened can greatly reduce the poten al for which hazard? - Answers
Roll out
Which is the correct mechanical or electrical system used to prevent the opera on of
Hazardous machine func ons under specified condi ons? - Answers Interlocking Device
interlock
When compressed air is used on-site for cleaning, which is the MAXIMUM pressure pound per
square inch (psi) that is allowed? - Answers 30 psi
, Which method is used to reduce the risk of struck-by injuries caused by powered industrial
trucks? - Answers Crea ng more space around corners and intersec ons for turning.
A worker is exhibi ng irritability, restlessness, red face, hot dry skin, shivering, disorienta on,
and body temperature greater than 104F. Which disorder is this and how would you apply first
aid? - Answers Heat Stroke - quick effec ve cooling, take body temperature, and transport to
hospital
Which is the MOST effec ve way to prevent a backing incident when opera ng a commercial
motor vehicle? - Answers Avoid backing up when not necessary.
A worker recently brought a safety hazard to the a<en on of their supervisor. The supervisor
conducted a job risk assessment and determined that there were several hazards associated
with the workers job that had a poten al to cause injury. What is this an example of? - Answers
Recognizing and controlling hazards
Which term best describes emergency care or treatment given to an I'll or injured person
before regular medical aid can be obtained? - Answers First aid
What is a class D fire? - Answers Flammable metal fire
All roofs and floor holes, as well as sky lights, both completed and under construc on shall be
protected or a<ended. Which is the MINIMUM ANSI requirement for an unprotected skylight
hoke while construc on workers are present? - Answers A standby person away from the hole
Which is the most effec ve method for reducing/elimina ng tripping hazards on regularly used
jobsite walkways? - Answers Keep walkways clear of obstruc ons
Which ac on should a worker take when opera ng a crane that comes in contact with live
power lines? - Answers Stay in the cab
"seek opportuni es to be of construc ve service in civic affairs and work for the advancement
of the safety, health, and well-being of their community" is from ehat organiza ons Code of
Ethics? - Answers BCSP
which is the first choice of protec ng yourself if an armed suspect enters upur building? -
Answers Run
When being made aware of professional misconduct by a BCSP cer fica on, what should you
do? - Answers bring the misconduct to the BCSP and no fy them
which en ty should complete the annual inspec ons of wite-strand rope? - Answers qualified
person
Which type of working pla)orm is built using rigid, load-bearing members, such as poles, legs,
frames, and outriggers? - Answers Supported
When designing a fall arrest system, the use of locking carabiners and snap hooks that require
two separate forces to be opened can greatly reduce the poten al for which hazard? - Answers
Roll out
Which is the correct mechanical or electrical system used to prevent the opera on of
Hazardous machine func ons under specified condi ons? - Answers Interlocking Device
interlock
When compressed air is used on-site for cleaning, which is the MAXIMUM pressure pound per
square inch (psi) that is allowed? - Answers 30 psi
, Which method is used to reduce the risk of struck-by injuries caused by powered industrial
trucks? - Answers Crea ng more space around corners and intersec ons for turning.
A worker is exhibi ng irritability, restlessness, red face, hot dry skin, shivering, disorienta on,
and body temperature greater than 104F. Which disorder is this and how would you apply first
aid? - Answers Heat Stroke - quick effec ve cooling, take body temperature, and transport to
hospital
Which is the MOST effec ve way to prevent a backing incident when opera ng a commercial
motor vehicle? - Answers Avoid backing up when not necessary.
A worker recently brought a safety hazard to the a<en on of their supervisor. The supervisor
conducted a job risk assessment and determined that there were several hazards associated
with the workers job that had a poten al to cause injury. What is this an example of? - Answers
Recognizing and controlling hazards
Which term best describes emergency care or treatment given to an I'll or injured person
before regular medical aid can be obtained? - Answers First aid
What is a class D fire? - Answers Flammable metal fire
All roofs and floor holes, as well as sky lights, both completed and under construc on shall be
protected or a<ended. Which is the MINIMUM ANSI requirement for an unprotected skylight
hoke while construc on workers are present? - Answers A standby person away from the hole
Which is the most effec ve method for reducing/elimina ng tripping hazards on regularly used
jobsite walkways? - Answers Keep walkways clear of obstruc ons
Which ac on should a worker take when opera ng a crane that comes in contact with live
power lines? - Answers Stay in the cab
