1|Page
CTR 156CT PROPANE FINAL EXAM |
COMPREHENSIVE Q&A FOR GUARANTEED
SUCCESS
New cylinders that have NOT been vacuum-purged by the manufacturer and
cylinders that have been opened to the atmosphere must be _______ prior to
filling. -correct-answer-purged of air or moisture
How do you know when an ASME tank is full? (Select all that apply.) -correct-
answer-A steady white mist is emitted from the fixed maximum liquid level gauge
The overfill protection device stops the flow
Which of the following is typically NOT the responsibility of a propane dispenser
operator? -correct-answer-Cylinder requalification
If a cylinder warning label is not legible or if the paper or plastic sleeve is removed
during inspection, __________________ before releasing the cylinder to the
customer. -correct-answer-Place a new one on it.
, 2|Page
Whether you can fill by weight or volume is determined by __________. -correct-
answer-regulations at the local level.
A blue-green stain on the brass portion of the cylinder valve is evidence that it has
been in contact with ____________________. -correct-answer-Anhydrous
ammonia
Where is the best place to evacuate during an uncontrolled propane release? -
correct-answer-Upwind from the propane release.
Before beginning the autogas refueling process, what should you do? (Select all
that apply.) -correct-answer-Make sure the vehicle is turned off.
Touch a grounded object to control static electricity.
Do not smoke, strike matches, or light a cigarette lighter.
All new propane cars have quick connect nozzles. -correct-answer-True
All cylinders must be filled outdoors or in an approved filling area. -correct-
answer-True
CTR 156CT PROPANE FINAL EXAM |
COMPREHENSIVE Q&A FOR GUARANTEED
SUCCESS
New cylinders that have NOT been vacuum-purged by the manufacturer and
cylinders that have been opened to the atmosphere must be _______ prior to
filling. -correct-answer-purged of air or moisture
How do you know when an ASME tank is full? (Select all that apply.) -correct-
answer-A steady white mist is emitted from the fixed maximum liquid level gauge
The overfill protection device stops the flow
Which of the following is typically NOT the responsibility of a propane dispenser
operator? -correct-answer-Cylinder requalification
If a cylinder warning label is not legible or if the paper or plastic sleeve is removed
during inspection, __________________ before releasing the cylinder to the
customer. -correct-answer-Place a new one on it.
, 2|Page
Whether you can fill by weight or volume is determined by __________. -correct-
answer-regulations at the local level.
A blue-green stain on the brass portion of the cylinder valve is evidence that it has
been in contact with ____________________. -correct-answer-Anhydrous
ammonia
Where is the best place to evacuate during an uncontrolled propane release? -
correct-answer-Upwind from the propane release.
Before beginning the autogas refueling process, what should you do? (Select all
that apply.) -correct-answer-Make sure the vehicle is turned off.
Touch a grounded object to control static electricity.
Do not smoke, strike matches, or light a cigarette lighter.
All new propane cars have quick connect nozzles. -correct-answer-True
All cylinders must be filled outdoors or in an approved filling area. -correct-
answer-True
