vivint burglar
What is the correct wiring configuration on a household fire alarm system initiating
circuit - answer Series with EOL supervision
In a residential alarm system, fire detection devices must - answer Cause an alarm that
is clearly audible in all bedrooms
What is the resistance across resistor R2 - answer3 ohms
A characteristic of alternating current is that it - answer Changes polarity 60 times per
second
NFPA is often referred to as the - answer Life Safety Code
In reference to cabling, UTP means - answer Unshielded twisted pair
In an alarm system, an EOLR is used to - answer Supervise a protective circuit
What must be considered when installing magnetic contacts with a steel door -
answerSteel alters the magnetic characteristics of the contacts
What values are needed to find the maximum available output wattage of a power
supply - answerOutput voltage and output amperage
An electric ground is used to - answerminimize electrostatic buildup that can damage
alarm components
What technology is used by modern digital communicators to communicate with the
monitoring station - answerVOIP
Cable that are not plenum rated can be used in a plenum when they are -
answerinstalled in a plenum rated raceway
A coworker sustained a high voltage shock during an installation and is unconscious.
What is the first action to take? - answerShut off the power to the structure
In residential construction, workers must be protected by a harness if they can fall how
many feet? - answer6
What are the most likely causes of accidents when working with handtools? -
answerimproper maintenance and misuse of tools
, The Oklahoma Alarm and Locksmith Industry act applies to - answerPersons who sell,
install and service alarm systems
Symptoms of a heart attack include chest pain, difficulty breathing and - answerpain in
the left arm
to create a safe handhold to reach another level, how many feet above the landing point
should the ladder be extended? - answer3
A coworker is pale, confused, sweating and says that he feels shaky. What is likely the
cause of these symptoms - answerLow Blood Sugar
A power tool has a 3 pronged plug but the only available outlets are 2 pronged. what
should the tech do? - answerfind a 3 pronged plug
What NFPA standard applies to residential burglarly installations? - answerNFPA 70
All monitoring and/or lease contracts shall include the initial term of the agreement, the
renewal term of the agreement and the - answerTerms for notification or cancellation
What is the recommended emergency treatment for a person experiencing low blood
sugar? - answerEat high sugar food like juice or hard candy
A tech can determine if an alarm system is causing a problem with his phone lines by
disconnecting the - answerRJ31X Jack
in order to be a tech/sales person, you must be - answer18
Which combination achieves an EOLR value of 2000 ohms - answerTwo 1000 ohm
resistors in series
Single conductors used on fire protective signalling circuits must be at least - answer18
AWG
What is the current raw of the circuit above - answerC
Upon conviction of a misdemeanor - answer500$
According to NFPA 72, smoke detectors shall not be installed if the temp is -
answerGreater than 100 degrees
All cabling between control unit and accessories essential to the operation of the
electronic premises security system. A single fault will be detected within - answer200
seconds
What is the correct wiring configuration on a household fire alarm system initiating
circuit - answer Series with EOL supervision
In a residential alarm system, fire detection devices must - answer Cause an alarm that
is clearly audible in all bedrooms
What is the resistance across resistor R2 - answer3 ohms
A characteristic of alternating current is that it - answer Changes polarity 60 times per
second
NFPA is often referred to as the - answer Life Safety Code
In reference to cabling, UTP means - answer Unshielded twisted pair
In an alarm system, an EOLR is used to - answer Supervise a protective circuit
What must be considered when installing magnetic contacts with a steel door -
answerSteel alters the magnetic characteristics of the contacts
What values are needed to find the maximum available output wattage of a power
supply - answerOutput voltage and output amperage
An electric ground is used to - answerminimize electrostatic buildup that can damage
alarm components
What technology is used by modern digital communicators to communicate with the
monitoring station - answerVOIP
Cable that are not plenum rated can be used in a plenum when they are -
answerinstalled in a plenum rated raceway
A coworker sustained a high voltage shock during an installation and is unconscious.
What is the first action to take? - answerShut off the power to the structure
In residential construction, workers must be protected by a harness if they can fall how
many feet? - answer6
What are the most likely causes of accidents when working with handtools? -
answerimproper maintenance and misuse of tools
, The Oklahoma Alarm and Locksmith Industry act applies to - answerPersons who sell,
install and service alarm systems
Symptoms of a heart attack include chest pain, difficulty breathing and - answerpain in
the left arm
to create a safe handhold to reach another level, how many feet above the landing point
should the ladder be extended? - answer3
A coworker is pale, confused, sweating and says that he feels shaky. What is likely the
cause of these symptoms - answerLow Blood Sugar
A power tool has a 3 pronged plug but the only available outlets are 2 pronged. what
should the tech do? - answerfind a 3 pronged plug
What NFPA standard applies to residential burglarly installations? - answerNFPA 70
All monitoring and/or lease contracts shall include the initial term of the agreement, the
renewal term of the agreement and the - answerTerms for notification or cancellation
What is the recommended emergency treatment for a person experiencing low blood
sugar? - answerEat high sugar food like juice or hard candy
A tech can determine if an alarm system is causing a problem with his phone lines by
disconnecting the - answerRJ31X Jack
in order to be a tech/sales person, you must be - answer18
Which combination achieves an EOLR value of 2000 ohms - answerTwo 1000 ohm
resistors in series
Single conductors used on fire protective signalling circuits must be at least - answer18
AWG
What is the current raw of the circuit above - answerC
Upon conviction of a misdemeanor - answer500$
According to NFPA 72, smoke detectors shall not be installed if the temp is -
answerGreater than 100 degrees
All cabling between control unit and accessories essential to the operation of the
electronic premises security system. A single fault will be detected within - answer200
seconds
