BICSI - Installer 1 - Review
A third 90-degree bend may be permitted
in a conduit run if the run does NOT
exceed ______?
B
A 5 m (16.5')
B 10 m (33')
C 15 m (50')
D 30 m (100')
Which of the following is a property of
an electromagnetic field built around a
conductor that opposes any changes in
current flow in a circuit?
A Impedance
C
B Capacitance
C Inductance
D Resistance
Which of the following markings is used
for non-conductive optical fiber gener-
al-purpose cables?
A OFNG
A
B OFCR
C OFCP
D OFNP
Which of the following refers to a set of
rules issued by a governmental body at
the state level within the US?
A
A Regulations
B Best Practices
, BICSI - Installer 1 - Review
C Applications
D Guidelines
What is the specified performance level
for Category 6 cable?
A 100 MHz
B
B 250 MHz
C 500 MHz
D 600 MHz
Which type of optical fiber cable should
be color coded with an Orange outer ca-
ble sheath?
A MM with a 100 um core diameter
A
B Dispersion-shifted SM optical fiber
C Polarization maintain SM optical fiber
D SM optical fiber
Which of the following is the primary
benefit of using wall-mounted racks and
cabinets in place of traditional equipment
racks?
A Provides equipment with a higher level
of protection D
B Allows for the equipment to be easily
rearranged
C Optimizes airflow within the equipment
room
, BICSI - Installer 1 - Review
D Takes up less space within the equip-
ment room
Which topology uses a linear configura-
tion that places all network devices on
one length of cable?
A Star C
B Ring
C Bus
Which of the Two organizations jointly
oversee the worldwide standardization
of telecommunications cabling?
A Alliance for Telecommunications In-
dustry Solutions (ATIS) and Society for
Cable Telecommunications Engineers
(SCTE)
B National Electrical Contractors Associ-
D
ation (NECA) and National Fire Protec-
tion Association (NFPA)
C Comite Europeen de Normalisation
Electrotechnique (CENELEC) and Elec-
tronic Industries Association (EIA)
D International Organization for Stan-
dardization (ISO) and International Elec-
trotechnical Commission (IEC)
Which of the following is designed to pro-
vide protection from harmful chemicals?
B
A Cut-resistant gloves
B Rubber gloves
, BICSI - Installer 1 - Review
C Leather gloves
Which of the following is a building-serv-
ing space that houses large pieces of
common active equipment?
A TR
B ER B
C TE
D Mechanical Room
E Battery room
Which phase of testing includes docu-
menting the test results?
A Phase 1
C
B Phase 2
C Phase 3
Which of the following are typically used
to support cables between a cable tray
and work area outlets?
A J-Hook
A
B Innerduct
C Pipe hanger
D Trapeze
Which of the following PPE items MUST
be worn at all times when you are work-
ing with or handling OF?
A third 90-degree bend may be permitted
in a conduit run if the run does NOT
exceed ______?
B
A 5 m (16.5')
B 10 m (33')
C 15 m (50')
D 30 m (100')
Which of the following is a property of
an electromagnetic field built around a
conductor that opposes any changes in
current flow in a circuit?
A Impedance
C
B Capacitance
C Inductance
D Resistance
Which of the following markings is used
for non-conductive optical fiber gener-
al-purpose cables?
A OFNG
A
B OFCR
C OFCP
D OFNP
Which of the following refers to a set of
rules issued by a governmental body at
the state level within the US?
A
A Regulations
B Best Practices
, BICSI - Installer 1 - Review
C Applications
D Guidelines
What is the specified performance level
for Category 6 cable?
A 100 MHz
B
B 250 MHz
C 500 MHz
D 600 MHz
Which type of optical fiber cable should
be color coded with an Orange outer ca-
ble sheath?
A MM with a 100 um core diameter
A
B Dispersion-shifted SM optical fiber
C Polarization maintain SM optical fiber
D SM optical fiber
Which of the following is the primary
benefit of using wall-mounted racks and
cabinets in place of traditional equipment
racks?
A Provides equipment with a higher level
of protection D
B Allows for the equipment to be easily
rearranged
C Optimizes airflow within the equipment
room
, BICSI - Installer 1 - Review
D Takes up less space within the equip-
ment room
Which topology uses a linear configura-
tion that places all network devices on
one length of cable?
A Star C
B Ring
C Bus
Which of the Two organizations jointly
oversee the worldwide standardization
of telecommunications cabling?
A Alliance for Telecommunications In-
dustry Solutions (ATIS) and Society for
Cable Telecommunications Engineers
(SCTE)
B National Electrical Contractors Associ-
D
ation (NECA) and National Fire Protec-
tion Association (NFPA)
C Comite Europeen de Normalisation
Electrotechnique (CENELEC) and Elec-
tronic Industries Association (EIA)
D International Organization for Stan-
dardization (ISO) and International Elec-
trotechnical Commission (IEC)
Which of the following is designed to pro-
vide protection from harmful chemicals?
B
A Cut-resistant gloves
B Rubber gloves
, BICSI - Installer 1 - Review
C Leather gloves
Which of the following is a building-serv-
ing space that houses large pieces of
common active equipment?
A TR
B ER B
C TE
D Mechanical Room
E Battery room
Which phase of testing includes docu-
menting the test results?
A Phase 1
C
B Phase 2
C Phase 3
Which of the following are typically used
to support cables between a cable tray
and work area outlets?
A J-Hook
A
B Innerduct
C Pipe hanger
D Trapeze
Which of the following PPE items MUST
be worn at all times when you are work-
ing with or handling OF?
