8/11/25, 6:17 AM C of Q 310T Prep / Actual Questions Bank / Complete Accurate Quizzes with Verified Answers / 2025. Flashcards | Quizlet
Science Engineering Mechanical Engineering
C of Q 310T Prep / Actual Questions Bank /
Complete Accurate Quizzes with Verified Answers
/ 2025.
1. Which of the following b. clutch friction disc
clutch components is a
driven member?!
a. clutch cover
b. clutch friction disc
c. intermediate plate
d. pressure plate
2. Which of the following d. adapter ring
is not a part of the clutch
cover assembly?!
a. pressure spring
b. release lever
c. pressure plate
d. adapter ring
3. Which of the following a. clutch friction disc
clutch components is
splined to the input shaft
of the transmission?!
a. clutch friction disc
b. pressure plate
c. release bearing
d. flywheel
… 1/135
,8/11/25, 6:17 AM C of Q 310T Prep / Actual Questions Bank / Complete Accurate Quizzes with Verified Answers / 2025. Flashcards | Quizlet
4. What is the function of a a. minimize gear clash during a neutral to first gear
current clutch brake used shift
in a heavy-duty
drivetrain?!
a. minimize gear clash
during a neutral to first
gear shift
b. minimize gear clash
during downshifts to all
ratios
c. minimize gear clash
during upshifts to all ratios
d. none of the above
5. Which of the following d. all of the above
driving procedures will
result in clutch or
driveline damage?!
a. driving with a foot on
the clutch pedal
b. using the clutch as a
brake to hold the truck on
a hill and incline
c. coasting downhill with
the transmission in gear
and the clutch disengaged
d. all of the above
… 2/135
,8/11/25, 6:17 AM C of Q 310T Prep / Actual Questions Bank / Complete Accurate Quizzes with Verified Answers / 2025. Flashcards | Quizlet
6. Which of the following d. all of the above
could be a cause of poor
clutch release?!
a. damaged drive pins
b. worn clutch linkage
c. worn release bearing
d. all of the above
7. How often should a d. all of the above
clutch be inspected and
lubricated?!
a. every month
b. every 6,000 to 10,000
miles
c. any time the chassis is
lubricated
d. all of the above
8. When adjusting clutch a. Technician A only
linkage, Technician A
says that pedal free
travel
should be about 1½ to 2
inches. Technician B says
that free travel should be
more than ½ inch
measured at the release
forks. Who is correct?!
a. Technician A only
b. Technician B only
c. both A and B
d. neither A nor B
… 3/135
, 8/11/25, 6:17 AM C of Q 310T Prep / Actual Questions Bank / Complete Accurate Quizzes with Verified Answers / 2025. Flashcards | Quizlet
9. When servicing a. Technician A only
clutches, Technician A
always wears an OSHA-
approved particulate
mask.
Technician B uses
compressed air to clean
off clutch components
before removing a clutch
pack. Who is correct?!
a. Technician A only
b. Technician B only
c. both A and B
d. neither A nor B
… 4/135
Science Engineering Mechanical Engineering
C of Q 310T Prep / Actual Questions Bank /
Complete Accurate Quizzes with Verified Answers
/ 2025.
1. Which of the following b. clutch friction disc
clutch components is a
driven member?!
a. clutch cover
b. clutch friction disc
c. intermediate plate
d. pressure plate
2. Which of the following d. adapter ring
is not a part of the clutch
cover assembly?!
a. pressure spring
b. release lever
c. pressure plate
d. adapter ring
3. Which of the following a. clutch friction disc
clutch components is
splined to the input shaft
of the transmission?!
a. clutch friction disc
b. pressure plate
c. release bearing
d. flywheel
… 1/135
,8/11/25, 6:17 AM C of Q 310T Prep / Actual Questions Bank / Complete Accurate Quizzes with Verified Answers / 2025. Flashcards | Quizlet
4. What is the function of a a. minimize gear clash during a neutral to first gear
current clutch brake used shift
in a heavy-duty
drivetrain?!
a. minimize gear clash
during a neutral to first
gear shift
b. minimize gear clash
during downshifts to all
ratios
c. minimize gear clash
during upshifts to all ratios
d. none of the above
5. Which of the following d. all of the above
driving procedures will
result in clutch or
driveline damage?!
a. driving with a foot on
the clutch pedal
b. using the clutch as a
brake to hold the truck on
a hill and incline
c. coasting downhill with
the transmission in gear
and the clutch disengaged
d. all of the above
… 2/135
,8/11/25, 6:17 AM C of Q 310T Prep / Actual Questions Bank / Complete Accurate Quizzes with Verified Answers / 2025. Flashcards | Quizlet
6. Which of the following d. all of the above
could be a cause of poor
clutch release?!
a. damaged drive pins
b. worn clutch linkage
c. worn release bearing
d. all of the above
7. How often should a d. all of the above
clutch be inspected and
lubricated?!
a. every month
b. every 6,000 to 10,000
miles
c. any time the chassis is
lubricated
d. all of the above
8. When adjusting clutch a. Technician A only
linkage, Technician A
says that pedal free
travel
should be about 1½ to 2
inches. Technician B says
that free travel should be
more than ½ inch
measured at the release
forks. Who is correct?!
a. Technician A only
b. Technician B only
c. both A and B
d. neither A nor B
… 3/135
, 8/11/25, 6:17 AM C of Q 310T Prep / Actual Questions Bank / Complete Accurate Quizzes with Verified Answers / 2025. Flashcards | Quizlet
9. When servicing a. Technician A only
clutches, Technician A
always wears an OSHA-
approved particulate
mask.
Technician B uses
compressed air to clean
off clutch components
before removing a clutch
pack. Who is correct?!
a. Technician A only
b. Technician B only
c. both A and B
d. neither A nor B
… 4/135
