NACE CIP Level 1 LATEST VERSION [QUESTIONS AND ANSWERS]
WITH PRACTICE EXAM DETAILED AND VERIFIED FOR GUARANTEED
PASS- LATEST UPDATE 2025 GRADED A
SSPC-SP13 - CORRECT ANSWER Surface prep of concrete
SSPC-SP7 - CORRECT ANSWER Brush off blast cleaning
NACE SP0178 - CORRECT ANSWER Design, fabrication, and surface finish
practices for tanks and vessels to be lined for immersion service.
SSPC-SP 11 - CORRECT ANSWER Power Tool Cleaning to Bare Metal
SSPC-PA2 - CORRECT ANSWER Measurement of Dry Coat Thickness with
magnetic gauges.
SSPC-SP10/NACE 2 limits staining to ______per each unit area - CORRECT
ANSWER 5%
Near White Commercial Blast
SSPC-SP6/NACE 3 limits staining to _______per each unit area - CORRECT
ANSWER 33%
Commercial Blasts
NACE SP0188 - CORRECT ANSWER holiday testing
SSPC-SP1 - CORRECT ANSWER Solvent Cleaning
SSPC-SP5/NACE 1 limits staining to _________per each unit area - CORRECT
ANSWER 0%
White Metal Blast
SSPC-SP3 - CORRECT ANSWER Power Tool Cleaning
SSPC-SP2 - CORRECT ANSWER Hand Tool Cleaning
ASTM D 4417 - CORRECT ANSWER surface profile blast cleaned steel
SA-3 - CORRECT ANSWER Blast Cleaning to Visually Clean Steel
SA 2 1/2 - CORRECT ANSWER Very Thorough Blast Cleaning
Sa 2 - CORRECT ANSWER Thorough Blast Cleaning
, SA 1 - CORRECT ANSWER Light Blast Cleaning
St 3 - CORRECT ANSWER Very Thorough Hand and Power Tool Cleaning
St 2 - CORRECT ANSWER Thorough Hand and Power Tool Cleaning
2 Non-convertible coating types - CORRECT ANSWER 1. Evaporation cure 2.
Coalescence cure
SSPC-VIS1 Defines surface covered with and rust as what grade? - CORRECT
ANSWER Grade B
SSPC-SP2
ISO St 3
ISO St 2
All deal with hand tool Cleaning. True or false? - CORRECT ANSWER True
Acrylic - CORRECT ANSWER A plastic resin that, when mixed with water and
pigment, forms an inorganic and quick-drying paint medium.
-Excellent UV and weather resistance
Polyaspartic - CORRECT ANSWER -Used to achieve low or near zero VOC systems
-pot lives from 5 minutes to several hours
-Film builds up to (15 mils) DFT in a single pass
Phenolic - CORRECT ANSWER Typically used where low PH environments and
Higher Temperature are factors
latex (Emulsions) - CORRECT ANSWER -Resins normally thermoplastic resin types
-Coalescence curing
(Non-convertible)
Furans - CORRECT ANSWER -Applied by Brick layers not coating applicators.
-Not a common coating type
epoxy - CORRECT ANSWER -Two parts, resin and hardener must be mixed.
-Can be solvent-based, water-based, or solvent-free
Alkyds - CORRECT ANSWER -Oxidative curing
-Reffered to as "Oil Based Paints"
Polyurethane - CORRECT ANSWER Two major types:
-Alphatic
-Aromatic
WITH PRACTICE EXAM DETAILED AND VERIFIED FOR GUARANTEED
PASS- LATEST UPDATE 2025 GRADED A
SSPC-SP13 - CORRECT ANSWER Surface prep of concrete
SSPC-SP7 - CORRECT ANSWER Brush off blast cleaning
NACE SP0178 - CORRECT ANSWER Design, fabrication, and surface finish
practices for tanks and vessels to be lined for immersion service.
SSPC-SP 11 - CORRECT ANSWER Power Tool Cleaning to Bare Metal
SSPC-PA2 - CORRECT ANSWER Measurement of Dry Coat Thickness with
magnetic gauges.
SSPC-SP10/NACE 2 limits staining to ______per each unit area - CORRECT
ANSWER 5%
Near White Commercial Blast
SSPC-SP6/NACE 3 limits staining to _______per each unit area - CORRECT
ANSWER 33%
Commercial Blasts
NACE SP0188 - CORRECT ANSWER holiday testing
SSPC-SP1 - CORRECT ANSWER Solvent Cleaning
SSPC-SP5/NACE 1 limits staining to _________per each unit area - CORRECT
ANSWER 0%
White Metal Blast
SSPC-SP3 - CORRECT ANSWER Power Tool Cleaning
SSPC-SP2 - CORRECT ANSWER Hand Tool Cleaning
ASTM D 4417 - CORRECT ANSWER surface profile blast cleaned steel
SA-3 - CORRECT ANSWER Blast Cleaning to Visually Clean Steel
SA 2 1/2 - CORRECT ANSWER Very Thorough Blast Cleaning
Sa 2 - CORRECT ANSWER Thorough Blast Cleaning
, SA 1 - CORRECT ANSWER Light Blast Cleaning
St 3 - CORRECT ANSWER Very Thorough Hand and Power Tool Cleaning
St 2 - CORRECT ANSWER Thorough Hand and Power Tool Cleaning
2 Non-convertible coating types - CORRECT ANSWER 1. Evaporation cure 2.
Coalescence cure
SSPC-VIS1 Defines surface covered with and rust as what grade? - CORRECT
ANSWER Grade B
SSPC-SP2
ISO St 3
ISO St 2
All deal with hand tool Cleaning. True or false? - CORRECT ANSWER True
Acrylic - CORRECT ANSWER A plastic resin that, when mixed with water and
pigment, forms an inorganic and quick-drying paint medium.
-Excellent UV and weather resistance
Polyaspartic - CORRECT ANSWER -Used to achieve low or near zero VOC systems
-pot lives from 5 minutes to several hours
-Film builds up to (15 mils) DFT in a single pass
Phenolic - CORRECT ANSWER Typically used where low PH environments and
Higher Temperature are factors
latex (Emulsions) - CORRECT ANSWER -Resins normally thermoplastic resin types
-Coalescence curing
(Non-convertible)
Furans - CORRECT ANSWER -Applied by Brick layers not coating applicators.
-Not a common coating type
epoxy - CORRECT ANSWER -Two parts, resin and hardener must be mixed.
-Can be solvent-based, water-based, or solvent-free
Alkyds - CORRECT ANSWER -Oxidative curing
-Reffered to as "Oil Based Paints"
Polyurethane - CORRECT ANSWER Two major types:
-Alphatic
-Aromatic
