ASPHALT PAVING LEVEL 1: EXAM,
2025/2026 WITH
CORRECT/ACCURATE ANSWERS
✓
✓
A full lot of super pave asphalt is what size?
1,000 tons
1,000 to 2000 tons
2000 to 4000 tons
1 days production - CORRECT ANSWERS- 2000 to 4000 tons
Asphalt placed when the mix temperature is too low can cause which of the
following problems?
Texture problems
Density may not be achieved
Ride or smoothness problems
All the above - CORRECT ANSWERS- All the above
What is the most accepted way to take the temperature of the hot
Mix asphalt in the truck?
Use an I fared temperature gun and take the readings over the side of the truck
, Test The middle third of the side of the truck
Use a quick reading thermometer
B and c. - CORRECT ANSWERS- B and c test and use
What is the single load temperature tolerance of the mix in the truck?
-+ 15 degrees Of the target mix temperature
-+ 25 degrees of the target mix temperature - CORRECT ANSWERS- -+ 25 degrees
What is the master range tolerance for the temperature of the mix in a mix truck?
-+ 15 degrees
-+ 30 degrees - CORRECT ANSWERS- -+ 30 degrees
If a single load exceeds the established mix by -+ 25 degrees but is within the
master range, the technician will monitor the temperature of every load until
A, The temperatures of five consecutive of 5 consecutive loads are all within 20
degrees of the target temperature
-b,the average of any 5 consecutive loads are within 15 degrees of the target
C, any single reading must be within 25 degrees of the target
D,the average of 5 consecutive loads is within 25 degrees of target temperature. -
CORRECT ANSWERS- B and c
Given the target mix temperature of 290 degrees and the following truck
temperatures 280, 285, 295, 300, 275....
2025/2026 WITH
CORRECT/ACCURATE ANSWERS
✓
✓
A full lot of super pave asphalt is what size?
1,000 tons
1,000 to 2000 tons
2000 to 4000 tons
1 days production - CORRECT ANSWERS- 2000 to 4000 tons
Asphalt placed when the mix temperature is too low can cause which of the
following problems?
Texture problems
Density may not be achieved
Ride or smoothness problems
All the above - CORRECT ANSWERS- All the above
What is the most accepted way to take the temperature of the hot
Mix asphalt in the truck?
Use an I fared temperature gun and take the readings over the side of the truck
, Test The middle third of the side of the truck
Use a quick reading thermometer
B and c. - CORRECT ANSWERS- B and c test and use
What is the single load temperature tolerance of the mix in the truck?
-+ 15 degrees Of the target mix temperature
-+ 25 degrees of the target mix temperature - CORRECT ANSWERS- -+ 25 degrees
What is the master range tolerance for the temperature of the mix in a mix truck?
-+ 15 degrees
-+ 30 degrees - CORRECT ANSWERS- -+ 30 degrees
If a single load exceeds the established mix by -+ 25 degrees but is within the
master range, the technician will monitor the temperature of every load until
A, The temperatures of five consecutive of 5 consecutive loads are all within 20
degrees of the target temperature
-b,the average of any 5 consecutive loads are within 15 degrees of the target
C, any single reading must be within 25 degrees of the target
D,the average of 5 consecutive loads is within 25 degrees of target temperature. -
CORRECT ANSWERS- B and c
Given the target mix temperature of 290 degrees and the following truck
temperatures 280, 285, 295, 300, 275....
