ASPHALT PAVING LEVEL 2: EXAM,
2025/2026 WITH
CORRECT/ACCURATE ANSWERS
✓
✓
A _______ is utilized when attempting to match elevations of two mats
placed side by side - CORRECT ANSWERS- (D.) Joint Matcher
Experts maintain that 95% of paver related problems can be eliminated
by:
A. Keeping the hopper empty between loads
B. Keeping the paver running slow
C. Adjusting the tow points constantly
D. Maintaining a uniform head of material in front of the auger
E. All the above - CORRECT ANSWERS- (D.) Maintaining a uniform
head of material in front of the auger
When milling for slope on the mainline roadway, if the average of 10
slope checks for the VT differs from the target by 0.1% what is required?
,- CORRECT ANSWERS- (A.) Tell Contractor to shut down milling
operation. Make corrections
The cores taken for Independent Verification (IV) must:
A. Be from the same location as the QC cores
B. Be from the same LOT and Sublots as the IV plant samples
C. Meet the requirements of Table 334-5 (master production)
D. All the above
E. Both B and C - CORRECT ANSWERS- (E. Both B and C) - Be from
the same LOT and Sublots as the IV plant samples and Meet the
requirements of Table 334-5 (master production)
(T/F:) Decision making authority needs to be given to the people at the
level closest to the work. - CORRECT ANSWERS- True
The screed connects to the paver at the _____. - CORRECT ANSWERS-
Tow Point
, What is the correct formula to convert thickness to spread rate for FC-5
only mixes? Spread Rate = - CORRECT ANSWERS- Thickness X Gsb X
40.5
If the Gmm is 2.465 and the Gsb is 2.593 for the S0-12.5, and the plan
thickness for the project is 2.0 inches, what is the desired spread rate? -
CORRECT ANSWERS- 213 lbs/yd²
(T/F:) Finish rolling must be completed prior to the mat cooling to
165°F - CORRECT ANSWERS- True
Rubblizing Concrete Pavement:
A. Is used on new concrete pavement
B. Leaves evenly spaced cracks, creating smaller slabs
C. Completely destroys the slabs, creating a crushed base
D. All the above
E. None of the above - CORRECT ANSWERS- (C.) Completely destroys
the slabs, creating a crushed base
2025/2026 WITH
CORRECT/ACCURATE ANSWERS
✓
✓
A _______ is utilized when attempting to match elevations of two mats
placed side by side - CORRECT ANSWERS- (D.) Joint Matcher
Experts maintain that 95% of paver related problems can be eliminated
by:
A. Keeping the hopper empty between loads
B. Keeping the paver running slow
C. Adjusting the tow points constantly
D. Maintaining a uniform head of material in front of the auger
E. All the above - CORRECT ANSWERS- (D.) Maintaining a uniform
head of material in front of the auger
When milling for slope on the mainline roadway, if the average of 10
slope checks for the VT differs from the target by 0.1% what is required?
,- CORRECT ANSWERS- (A.) Tell Contractor to shut down milling
operation. Make corrections
The cores taken for Independent Verification (IV) must:
A. Be from the same location as the QC cores
B. Be from the same LOT and Sublots as the IV plant samples
C. Meet the requirements of Table 334-5 (master production)
D. All the above
E. Both B and C - CORRECT ANSWERS- (E. Both B and C) - Be from
the same LOT and Sublots as the IV plant samples and Meet the
requirements of Table 334-5 (master production)
(T/F:) Decision making authority needs to be given to the people at the
level closest to the work. - CORRECT ANSWERS- True
The screed connects to the paver at the _____. - CORRECT ANSWERS-
Tow Point
, What is the correct formula to convert thickness to spread rate for FC-5
only mixes? Spread Rate = - CORRECT ANSWERS- Thickness X Gsb X
40.5
If the Gmm is 2.465 and the Gsb is 2.593 for the S0-12.5, and the plan
thickness for the project is 2.0 inches, what is the desired spread rate? -
CORRECT ANSWERS- 213 lbs/yd²
(T/F:) Finish rolling must be completed prior to the mat cooling to
165°F - CORRECT ANSWERS- True
Rubblizing Concrete Pavement:
A. Is used on new concrete pavement
B. Leaves evenly spaced cracks, creating smaller slabs
C. Completely destroys the slabs, creating a crushed base
D. All the above
E. None of the above - CORRECT ANSWERS- (C.) Completely destroys
the slabs, creating a crushed base
