NRA BASIC PISTOL SHOOTING COURSE EXAM-
ACTUAL EXAM-LATEST UPDATE |COMPLETE
QUESTIONS WITH CORRECT DETAILED AND VERIFIED
ANSWERS-MOSTLY TESTED QUESTIONS| RATED
100% CORRECT!! GUARANTEED PASS!! ALREADY
GRADED A+
The three major components of a pistol are: - ...(ANSWERS)....frame, barrel and
action
Your finger may contact the trigger: - ...(ANSWERS)....when you are ready to
shoot
The trigger mechanism: - ...(ANSWERS)....releases a spring-powered hammer or
striker to fire the cartridge.
Aiming consists of: - ...(ANSWERS)....sight alignment and sight picture.
When aiming a pistol, the eye can only focus on one object at a time; therefore,
you should focus on the (BLANK) so that it appears clear and sharp. -
...(ANSWERS)....front sight
To ensure you use the correct ammunition for your gun: - ...(ANSWERS)....a.
check the information stamped on the barrel and/or slide.
b. check your owner's manual.
c. check the cartridge box and cartridge headstamp.
, d. all of the above.
When a cartridge fails to fire immediately, you should: - ...(ANSWERS)....keep the
pistol pointed in a safe direction and, after waiting at least 30 seconds (as a
precaution in case of a hangfire), open the action and remove the cartridge.
When gripping the pistol, you should: - ...(ANSWERS)....use the same grip each
time that you hold the pistol.
Follow-through is important because: - ...(ANSWERS)....it integrates, maintains
and continues all shooting fundamentals before, during and immediately after
firing the shot.
The frame of a pistol is: - ...(ANSWERS)....is the central component of most
pistols.
The four components of a pistol cartridge are: - ...(ANSWERS)....case, primer,
powder charge and bullet.
Some of the benefits of the Isosceles Position are: - ...(ANSWERS)....it is natural
and easy to assume.
Double-action refers to the type of action: - ...(ANSWERS)....in which pulling the
trigger performs two tasks: cocking and releasing the hammer.
ACTUAL EXAM-LATEST UPDATE |COMPLETE
QUESTIONS WITH CORRECT DETAILED AND VERIFIED
ANSWERS-MOSTLY TESTED QUESTIONS| RATED
100% CORRECT!! GUARANTEED PASS!! ALREADY
GRADED A+
The three major components of a pistol are: - ...(ANSWERS)....frame, barrel and
action
Your finger may contact the trigger: - ...(ANSWERS)....when you are ready to
shoot
The trigger mechanism: - ...(ANSWERS)....releases a spring-powered hammer or
striker to fire the cartridge.
Aiming consists of: - ...(ANSWERS)....sight alignment and sight picture.
When aiming a pistol, the eye can only focus on one object at a time; therefore,
you should focus on the (BLANK) so that it appears clear and sharp. -
...(ANSWERS)....front sight
To ensure you use the correct ammunition for your gun: - ...(ANSWERS)....a.
check the information stamped on the barrel and/or slide.
b. check your owner's manual.
c. check the cartridge box and cartridge headstamp.
, d. all of the above.
When a cartridge fails to fire immediately, you should: - ...(ANSWERS)....keep the
pistol pointed in a safe direction and, after waiting at least 30 seconds (as a
precaution in case of a hangfire), open the action and remove the cartridge.
When gripping the pistol, you should: - ...(ANSWERS)....use the same grip each
time that you hold the pistol.
Follow-through is important because: - ...(ANSWERS)....it integrates, maintains
and continues all shooting fundamentals before, during and immediately after
firing the shot.
The frame of a pistol is: - ...(ANSWERS)....is the central component of most
pistols.
The four components of a pistol cartridge are: - ...(ANSWERS)....case, primer,
powder charge and bullet.
Some of the benefits of the Isosceles Position are: - ...(ANSWERS)....it is natural
and easy to assume.
Double-action refers to the type of action: - ...(ANSWERS)....in which pulling the
trigger performs two tasks: cocking and releasing the hammer.
