Questions and CORRECT Answers
What is one of your primary responsibilities during the initial inspection - CORRECT
ANSWER - Identify and address saftey hazzards
After de-energizing circuits, what is the next step to create the safest working environment -
CORRECT ANSWER - Utilize lockout/tag out procedures
When a contaminated water loss involves high -risk individuals , you should - CORRECT
ANSWER - Consider an IEP to assess contamination
What does IEP stand for? - CORRECT ANSWER - Indoor Environmental Professional
A cat 1 water loss is - CORRECT ANSWER - Sanitary
A cat 2 water loss is - CORRECT ANSWER - Significantly contaminated
A cat 3 water loss is - CORRECT ANSWER - Grossly contaminated
To wear a respirator, individuals must - CORRECT ANSWER - Be medically evaluated,
fit tested and trained
If mold is discovered , you should initially - CORRECT ANSWER - Use PPE and
containment
Dispose of waste water in accordance with________ - CORRECT ANSWER - Local and
state laws
, The two most common hazardous materials that may be found during a water loss is lead-based
paint and_____ - CORRECT ANSWER - Asbestos
______ is the temp stuff again which water vapor begins to turn to a liquid - CORRECT
ANSWER - Dew point
What is the humidity ratio if the air temperature is 60F and the relative humidity is 65%? -
CORRECT ANSWER - 50 grains per pound
Relative humidity is the percent of moisture in the air at a given_________ - CORRECT
ANSWER - Temperature
Humidity ratio is a better measure than relative humidity because it gives the _________ weight
of water per pins of dry air - CORRECT ANSWER - Actual
Nature always seeks a _____ - CORRECT ANSWER - equilibrium
With everything being equal, the temperature that will give you the highest rate of evaporation
is? - CORRECT ANSWER - 85 F
The fastest rate of evaporation occurs under which consist ion? - CORRECT ANSWER -
85 F and 45%
In the US humidity is measured in - CORRECT ANSWER - Grains per pound
Other factors remaining equal, increasing the air temperature will lower relative humidity T or F
- CORRECT ANSWER - True
Materials which are highly prone to secondary damage caused by high humidity are called ? -
CORRECT ANSWER - Hygroscopic