CAD CIVIL 3D EXAM 2025 QUESTIONS
AND ANSWERS
The frequently used, parcel sizing routine that creates a lot by moving a line along a frontage is
called "_____ Line - Create". - ANS slide
Which AutoCAD entity cannot be converted to a parcel segment using the Create Parcel from
Objects command - ANS Circle
Many of the ________ editing commands can also be used to edit parcels. - ANS Feature line
Which of the following is not a Remainder Distribution option? - ANS Subtract Remainder
from First Parcel
True or false: In order for parcel segments to create a parcel, they must all reside in the same
site. - ANS True
The required distance between a property line and a building is called the ______. -
ANS setback
A strip of land utilized for transportation purposes is called a ____-__-___. - ANS Right of
Way
In addition to parcel segments, what is another object type that can be placed within a site and
used in parcel creation? - ANS Alignment
1 Copyright ©2025 THESTAR ALL RIGHTS RESERVED
, If on a clock 12:00 is due north, at 7:00 the hour hand would be pointing in which direction? -
ANS S 30° W
True or false: A diamond-shaped grip on a parcel segment can be moved in any direction and is
not constrained to any other object. - ANS False.The diamond-shaped grip stays locked to
the frontage lines it is attached to. It also adjusts the orientation of the lot line to maintain its
angle with the frontage; often set at 90 degrees.
Which of the following is not a type of information that is commonly expressed by parcel
segment labels? - ANS Layer
The angular change in direction between a line tangent to the curve at its beginning point and
line tangent to the curve at its ending point is referred to as: - ANS Delta
Right clicking on the Parcels heading in Prospector, then selecting Properties and the
Composition tab _____________ - ANS allows for Parcel Display Order settings to be applied.
To insert a table which combines line data with curve data you would select Add _____ from
the Parcel table options. - ANS segment
True or false: Parcel Area Labels always include the area of the parcel in the label. - ANS False
When a label is moved, which may cause a leader to appear, you have activated the _____ state
of the label. - ANS dragged
When a line, curve, or segment table is created, the segment labels are replaced with ___
labels. - ANS tag
Which command would change a bearing of N 30° W to S 30° E? - ANS Reverse
2 Copyright ©2025 THESTAR ALL RIGHTS RESERVED
AND ANSWERS
The frequently used, parcel sizing routine that creates a lot by moving a line along a frontage is
called "_____ Line - Create". - ANS slide
Which AutoCAD entity cannot be converted to a parcel segment using the Create Parcel from
Objects command - ANS Circle
Many of the ________ editing commands can also be used to edit parcels. - ANS Feature line
Which of the following is not a Remainder Distribution option? - ANS Subtract Remainder
from First Parcel
True or false: In order for parcel segments to create a parcel, they must all reside in the same
site. - ANS True
The required distance between a property line and a building is called the ______. -
ANS setback
A strip of land utilized for transportation purposes is called a ____-__-___. - ANS Right of
Way
In addition to parcel segments, what is another object type that can be placed within a site and
used in parcel creation? - ANS Alignment
1 Copyright ©2025 THESTAR ALL RIGHTS RESERVED
, If on a clock 12:00 is due north, at 7:00 the hour hand would be pointing in which direction? -
ANS S 30° W
True or false: A diamond-shaped grip on a parcel segment can be moved in any direction and is
not constrained to any other object. - ANS False.The diamond-shaped grip stays locked to
the frontage lines it is attached to. It also adjusts the orientation of the lot line to maintain its
angle with the frontage; often set at 90 degrees.
Which of the following is not a type of information that is commonly expressed by parcel
segment labels? - ANS Layer
The angular change in direction between a line tangent to the curve at its beginning point and
line tangent to the curve at its ending point is referred to as: - ANS Delta
Right clicking on the Parcels heading in Prospector, then selecting Properties and the
Composition tab _____________ - ANS allows for Parcel Display Order settings to be applied.
To insert a table which combines line data with curve data you would select Add _____ from
the Parcel table options. - ANS segment
True or false: Parcel Area Labels always include the area of the parcel in the label. - ANS False
When a label is moved, which may cause a leader to appear, you have activated the _____ state
of the label. - ANS dragged
When a line, curve, or segment table is created, the segment labels are replaced with ___
labels. - ANS tag
Which command would change a bearing of N 30° W to S 30° E? - ANS Reverse
2 Copyright ©2025 THESTAR ALL RIGHTS RESERVED
