FRESENIUS MEDICAL 12 WEEK EXAM STUDY GUIDE
2025
1 part bleach to 9 parts water
- answer-to mix a 1: 10 bleach solution a PCT would add ?
1 parts bleach and 9 parts water solution
- answer-the first bleach solution used to clean a large blood spill area (greater than
10 ml) isd
1:100 bleach for 10 minutes after use
- answer-Clamps must be soak in what and how long?
1.4
- answer-the online clearance (Olc) spkt/V goal for each treatment is
2/3 to 3/4 full
- answer-sharps containers must be replaced when they are ____________to
__________ full.
20-30 seconds
- answer-when cleaning hands with hand sanitizer, how long must you rub your
hands
40-60 seconds
- answer-when washing hands with soap and water how long must you wash your
hands
6.9 and 7.6
- answer-The final dialysate must have a pH between _____ - _____.
6.9 to 7.6
- answer-which of the following PH measures is safe for dialysate
a blood leak
- answer-when blood escapes from the dialyzer blood compartments into the
dialysate fluid compartment this is know as
, a functional test on machine
- answer-during dialysis a patient has a cardia arrest. What action should be
completed on the dialysis machine before the machine is used by another patient ?
technical must perform _________ on the machine.
A patient event
- answer-A __________ is defined as any time there is failure to follow establish
procedures, treatment prescriptions or an event that causes patient injury or death
a patient event
- answer-Failure to report errors or near misses can result in a ____________
after cleaning with acid
- answer-before the start of treatment, check that
air
- answer-a low- level drip chamber can result in ___________ entering the system
causing an air embolism clotting
air embolism and clotting in the dialyzer
- answer-Improperly primed dialyzers and bloodlines can increase the risk of
Air in dialyzer
- answer-What is removed by normal saline during the priming process?
Available weight
- answer-the term used for pre- treatment weight minus estimated dry weight is
before each treatment
- answer-when should alarm and pressure holding test (PHT) be performed on
dialysis machines
BFR
- answer-blood flow rate
Bicarb
- answer-Bicarbonate
2025
1 part bleach to 9 parts water
- answer-to mix a 1: 10 bleach solution a PCT would add ?
1 parts bleach and 9 parts water solution
- answer-the first bleach solution used to clean a large blood spill area (greater than
10 ml) isd
1:100 bleach for 10 minutes after use
- answer-Clamps must be soak in what and how long?
1.4
- answer-the online clearance (Olc) spkt/V goal for each treatment is
2/3 to 3/4 full
- answer-sharps containers must be replaced when they are ____________to
__________ full.
20-30 seconds
- answer-when cleaning hands with hand sanitizer, how long must you rub your
hands
40-60 seconds
- answer-when washing hands with soap and water how long must you wash your
hands
6.9 and 7.6
- answer-The final dialysate must have a pH between _____ - _____.
6.9 to 7.6
- answer-which of the following PH measures is safe for dialysate
a blood leak
- answer-when blood escapes from the dialyzer blood compartments into the
dialysate fluid compartment this is know as
, a functional test on machine
- answer-during dialysis a patient has a cardia arrest. What action should be
completed on the dialysis machine before the machine is used by another patient ?
technical must perform _________ on the machine.
A patient event
- answer-A __________ is defined as any time there is failure to follow establish
procedures, treatment prescriptions or an event that causes patient injury or death
a patient event
- answer-Failure to report errors or near misses can result in a ____________
after cleaning with acid
- answer-before the start of treatment, check that
air
- answer-a low- level drip chamber can result in ___________ entering the system
causing an air embolism clotting
air embolism and clotting in the dialyzer
- answer-Improperly primed dialyzers and bloodlines can increase the risk of
Air in dialyzer
- answer-What is removed by normal saline during the priming process?
Available weight
- answer-the term used for pre- treatment weight minus estimated dry weight is
before each treatment
- answer-when should alarm and pressure holding test (PHT) be performed on
dialysis machines
BFR
- answer-blood flow rate
Bicarb
- answer-Bicarbonate
