ICC Test ACTUAL UPDATED Exam
Questions and CORRECT Answers
Phase 1 equipment is related to all of the following except: - CORRECT ANSWER -
Dispenser mounted vapor recovery equipment
According to EO VR-201/202-N, the only authorized hose configuration is: - CORRECT
ANSWER - Any Hose Configuration
The most current ARB approved Phase II vapory recovery is: - CORRECT ANSWER -
EVR
When a certified Healy Technician is replacing the VP 1000 during operational hours, they
should do all of the following to eliminate the potentials problem except: - CORRECT
ANSWER - review service with gas station operator
The following component is not part of the Healy Phase II vapory recovery system: - CORRECT
ANSWER - Healy Model 900 Vapor Motor
The max dispensing flow rate of a Healy 900 Series EVR nozzel is: - CORRECT
ANSWER - 10 GPM
According to VR-201/202-N, a _____ should be installed on the Healy system if the flow rate is
above 10 GPM - CORRECT ANSWER - Flow limiter
The Quarterly Inspection and Testing of a Healy Phase II EVR system should include the
following except: - CORRECT ANSWER - conduct a pressure decay test by a Healy
Certified Technician
The first sign of oxygen depletion is: - CORRECT ANSWER - accelerated breathing and
heartbeat
, According to PEI 500, each of the following are proper methods of removing a portion of a GDF
from service except: - CORRECT ANSWER - noting event in the defective equipment log
What procedure checks the integrity of the vapor check valve in the nozzle? - CORRECT
ANSWER - Nozzle bag test
Which of the following conditions is a Healy certified technician not required to repair? -
CORRECT ANSWER - Reconnection of a breakaway after a drive off
What procedure is required after a nozzle spout change? - CORRECT ANSWER - Nozzle
automatic shutoff test
A vapor recovery system generally uses what unit of measurment? - CORRECT
ANSWER - Inches of water column
During the annual inspection and testing of the vapor recovery system; the first three steps are to:
a) Conduct static pressure performance of the Healy Clean Air Separator
b) Conduct pressure decay test
c) Conduct dispenser vapor line tightness test
What is the 4th step? - CORRECT ANSWER - Conduct V/L test on all nozzles
What is the lower limit of acceptable V/L for a nozzle? - CORRECT ANSWER - .95
In order for a technician to be authorized to clear an ISD Alarm, he or she must be certified by
which of the following? - CORRECT ANSWER - Manufacture
The Clean Air Separator belongs to which system? - CORRECT ANSWER - Healy Phase
II
Questions and CORRECT Answers
Phase 1 equipment is related to all of the following except: - CORRECT ANSWER -
Dispenser mounted vapor recovery equipment
According to EO VR-201/202-N, the only authorized hose configuration is: - CORRECT
ANSWER - Any Hose Configuration
The most current ARB approved Phase II vapory recovery is: - CORRECT ANSWER -
EVR
When a certified Healy Technician is replacing the VP 1000 during operational hours, they
should do all of the following to eliminate the potentials problem except: - CORRECT
ANSWER - review service with gas station operator
The following component is not part of the Healy Phase II vapory recovery system: - CORRECT
ANSWER - Healy Model 900 Vapor Motor
The max dispensing flow rate of a Healy 900 Series EVR nozzel is: - CORRECT
ANSWER - 10 GPM
According to VR-201/202-N, a _____ should be installed on the Healy system if the flow rate is
above 10 GPM - CORRECT ANSWER - Flow limiter
The Quarterly Inspection and Testing of a Healy Phase II EVR system should include the
following except: - CORRECT ANSWER - conduct a pressure decay test by a Healy
Certified Technician
The first sign of oxygen depletion is: - CORRECT ANSWER - accelerated breathing and
heartbeat
, According to PEI 500, each of the following are proper methods of removing a portion of a GDF
from service except: - CORRECT ANSWER - noting event in the defective equipment log
What procedure checks the integrity of the vapor check valve in the nozzle? - CORRECT
ANSWER - Nozzle bag test
Which of the following conditions is a Healy certified technician not required to repair? -
CORRECT ANSWER - Reconnection of a breakaway after a drive off
What procedure is required after a nozzle spout change? - CORRECT ANSWER - Nozzle
automatic shutoff test
A vapor recovery system generally uses what unit of measurment? - CORRECT
ANSWER - Inches of water column
During the annual inspection and testing of the vapor recovery system; the first three steps are to:
a) Conduct static pressure performance of the Healy Clean Air Separator
b) Conduct pressure decay test
c) Conduct dispenser vapor line tightness test
What is the 4th step? - CORRECT ANSWER - Conduct V/L test on all nozzles
What is the lower limit of acceptable V/L for a nozzle? - CORRECT ANSWER - .95
In order for a technician to be authorized to clear an ISD Alarm, he or she must be certified by
which of the following? - CORRECT ANSWER - Manufacture
The Clean Air Separator belongs to which system? - CORRECT ANSWER - Healy Phase
II
