88M Module A Questions with correct
answers
What DA Form is used to record faults found when performing Preventative Maintenance Checks and
Services (PMCS)? - CORRECT ANSWERS ✔✔-5988E
Equipment operation is NOT permitted with what class leak(s)? - CORRECT ANSWERS ✔✔-Class III and
any fuel leak
What DA Form is to "Record Motor Equipment Use"? - CORRECT ANSWERS ✔✔-5987E
What part of a Lubrication Order contains information identifying lubricants, capacities and intervals? -
CORRECT ANSWERS ✔✔-Key
Which of the following signifies a potential hazard that could cause death or serious injury to a person? -
CORRECT ANSWERS ✔✔-Warning
What PMCS interval(s) is/are performed prior to operating a vehicle for the first time? - CORRECT
ANSWERS ✔✔-Before and weekly
Within TM 9-2320-392-20, what number identifies the specific series of vehicles? - CORRECT ANSWERS
✔✔-392
Within Technical Manual (TM) 9-2320-392-20, what number indicates ordnance material? - CORRECT
ANSWERS ✔✔-9
What is the first step in performing PMCS - CORRECT ANSWERS ✔✔-360 degree walk around
Information within the Technical Manual (TM) covers what? - CORRECT ANSWERS ✔✔-Operation and
maintenance
, What is written in the corrective action column if the operator finds no vehicle faults? - CORRECT
ANSWERS ✔✔-Nothing
What symbol on a Lubrication Order indicates a lubrication point Organizational Maintenance will
lubricate? - CORRECT ANSWERS ✔✔-O
A Class I leak is identified by _______. - CORRECT ANSWERS ✔✔-seepage of fluid not great enough to
form drops
Oil usage is documented on what DA Form? - CORRECT ANSWERS ✔✔-5987E
Who is ultimately responsible and liable for the proper operation and care of any vehicle? - CORRECT
ANSWERS ✔✔-Operator
There are five levels of maintenance; what level refers to organizational maintenance? - CORRECT
ANSWERS ✔✔-20
What PMCS interval is considered the most important? - CORRECT ANSWERS ✔✔-After
What does a solid line indicate on the diagram portion of a Lubrication Order? - CORRECT ANSWERS
✔✔-Single component at this location
A Class II leak is identified by _________________. - CORRECT ANSWERS ✔✔-fluid great enough to
form drops, but not drip
Which of the following is a fault status symbol? - CORRECT ANSWERS ✔✔-x
What action, if any, should the operator take if there is a plus (+) sign on the FIPR tab? - CORRECT
ANSWERS ✔✔-Respond
How many main areas are there in the JCR-LOG display process screen? - CORRECT ANSWERS ✔✔-3
answers
What DA Form is used to record faults found when performing Preventative Maintenance Checks and
Services (PMCS)? - CORRECT ANSWERS ✔✔-5988E
Equipment operation is NOT permitted with what class leak(s)? - CORRECT ANSWERS ✔✔-Class III and
any fuel leak
What DA Form is to "Record Motor Equipment Use"? - CORRECT ANSWERS ✔✔-5987E
What part of a Lubrication Order contains information identifying lubricants, capacities and intervals? -
CORRECT ANSWERS ✔✔-Key
Which of the following signifies a potential hazard that could cause death or serious injury to a person? -
CORRECT ANSWERS ✔✔-Warning
What PMCS interval(s) is/are performed prior to operating a vehicle for the first time? - CORRECT
ANSWERS ✔✔-Before and weekly
Within TM 9-2320-392-20, what number identifies the specific series of vehicles? - CORRECT ANSWERS
✔✔-392
Within Technical Manual (TM) 9-2320-392-20, what number indicates ordnance material? - CORRECT
ANSWERS ✔✔-9
What is the first step in performing PMCS - CORRECT ANSWERS ✔✔-360 degree walk around
Information within the Technical Manual (TM) covers what? - CORRECT ANSWERS ✔✔-Operation and
maintenance
, What is written in the corrective action column if the operator finds no vehicle faults? - CORRECT
ANSWERS ✔✔-Nothing
What symbol on a Lubrication Order indicates a lubrication point Organizational Maintenance will
lubricate? - CORRECT ANSWERS ✔✔-O
A Class I leak is identified by _______. - CORRECT ANSWERS ✔✔-seepage of fluid not great enough to
form drops
Oil usage is documented on what DA Form? - CORRECT ANSWERS ✔✔-5987E
Who is ultimately responsible and liable for the proper operation and care of any vehicle? - CORRECT
ANSWERS ✔✔-Operator
There are five levels of maintenance; what level refers to organizational maintenance? - CORRECT
ANSWERS ✔✔-20
What PMCS interval is considered the most important? - CORRECT ANSWERS ✔✔-After
What does a solid line indicate on the diagram portion of a Lubrication Order? - CORRECT ANSWERS
✔✔-Single component at this location
A Class II leak is identified by _________________. - CORRECT ANSWERS ✔✔-fluid great enough to
form drops, but not drip
Which of the following is a fault status symbol? - CORRECT ANSWERS ✔✔-x
What action, if any, should the operator take if there is a plus (+) sign on the FIPR tab? - CORRECT
ANSWERS ✔✔-Respond
How many main areas are there in the JCR-LOG display process screen? - CORRECT ANSWERS ✔✔-3
