13/06/2025, 14:39 NETA 3 Exam ACTUAL QUESTIONS WITH ACCURATE AND VERIFIED ANSWERS,100% CORRECT!! Flashcards | Quizlet
NETA 3 Exam ACTUAL QUESTIONS WITH
ACCURATE AND VERIFIED ANSWERS,100%
CORRECT!!
Save
Terms in this set (30)
Liquid-filled transformer bushing hot-collar
0.1 acceptance test values that exceed____ watts should
be investigated per NETA ATS
Minimum acceptable megohm value for metal-oxide
5000
surge arrester rated 15kv with Mcov rating 12.7kv
ASTM D877 dielectric breakdown test, the electrode
2.5mm
gap seperation is fixed at
Maximum allowed combined frequency variation from
10%
nameplate for AC induction motors?
NETA-MTS recommended test voltage for a 15 minute
withstand test on a single-phase, 15kV line
39 VDC
sectionalizer with a rated impulse withstand voltage
of 95 kV
Medium voltage switchgear electrical testing and
18 maintenance Every ____ months for high reliability
requirement in good condition
Wound-rotor induction motor Known for ____ starting
High Low
torque, and ___ starting current.
Time constant Capacitance x load resistance
https://quizlet.com/1054020232/neta-3-exam-actual-questions-with-accurate-and-verified-answers100-correct-flash-cards/?new 1/3
NETA 3 Exam ACTUAL QUESTIONS WITH
ACCURATE AND VERIFIED ANSWERS,100%
CORRECT!!
Save
Terms in this set (30)
Liquid-filled transformer bushing hot-collar
0.1 acceptance test values that exceed____ watts should
be investigated per NETA ATS
Minimum acceptable megohm value for metal-oxide
5000
surge arrester rated 15kv with Mcov rating 12.7kv
ASTM D877 dielectric breakdown test, the electrode
2.5mm
gap seperation is fixed at
Maximum allowed combined frequency variation from
10%
nameplate for AC induction motors?
NETA-MTS recommended test voltage for a 15 minute
withstand test on a single-phase, 15kV line
39 VDC
sectionalizer with a rated impulse withstand voltage
of 95 kV
Medium voltage switchgear electrical testing and
18 maintenance Every ____ months for high reliability
requirement in good condition
Wound-rotor induction motor Known for ____ starting
High Low
torque, and ___ starting current.
Time constant Capacitance x load resistance
https://quizlet.com/1054020232/neta-3-exam-actual-questions-with-accurate-and-verified-answers100-correct-flash-cards/?new 1/3
