Escrito por estudiantes que aprobaron Inmediatamente disponible después del pago Leer en línea o como PDF ¿Documento equivocado? Cámbialo gratis 4,6 TrustPilot
logo-home
Document preview thumbnail
Vista previa 1 fuera de 4 páginas
Examen

ENGINE COOLING EXAM LATEST UPDATE ALREADY GRADED A UPDATE

Document preview thumbnail
Vista previa 1 fuera de 4 páginas

ENGINE COOLING EXAM LATEST UPDATE ALREADY GRADED A UPDATE About how much of the heat produced within modern engine combustion chambers must be removed by the vehicle cooling system? (A) One-fourth. (B) One-third. (C) One-half. (D) Two-thirds. - ANSWERB True or False? One job of the engine cooling system is to maintain an efficient temperature during all operating conditions. - ANSWERTrue All of the following conditions can occur to an engine operating below its efficient operating temperature (cold), except: (A) decreased horsepower. (B) formation of engine deposits. (C) lower exhaust emissions. (D) decreased fuel mileage. - ANSWERC True or False? Most car and light truck engines use an air cooling system. - ANSWERFalse _____ are cast into the engine block and cylinder heads for liquid to flow through a liquid-cooled engine. (A) Cooling fins (B) Expansion tanks (C) Cooling passages (D) Freeze plugs - ANSWERC True or False? A liquid-cooled engine uses pure water to cool the engine. - ANSWERFalse To control engine temperature more accurately, the coolant pump on some new vehicles is driven by a(n) _____. (A) internal gear (B) electric motor (C) beltdriven clutch (D) chain drive - ANSWERB A(n) _____ removes heat from coolant so it can be reused. (A) impeller (B) freeze plug (C) radiator (D) thermostat - ANSWERC True or False? A fan clutch causes a fan to freewheel above a certain engine rpm. - ANSWERTrue All of the following statements about rubber hoses used in a vehicle cooling system are true, except: (A) they are secured to their fittings by hose clamps. (B) they offer a universal fit on any cooling system design and engine size. (C) they connect the radiator to the coolant pump and engine. (D) they must be strong but flexible to withstand system conditions. - ANSWERB The thermostat should be completely closed when the engine is _____. (A) cold (B) partially warm (C) fully warmed up (D) overheating - ANSWERA True or False? The thermostat constantly changes the size of its opening in relation to coolant temperature. - ANSWERTrue Modern thermostats are operated by a_____. (A) wax pellet (B) coolant shut-off valve (C) bleeder valve (D) cover finger - ANSWERA True or False? Thermostats featuring a higher temperature range raise the engine operating temperature quickly, and in doing so, aid in emission control. - ANSWERTrue To prevent NO X formation in a partially warmed-up engine, a(n) _____ is sometimes used. (A) freeze plug (B) manual bleeder valve (C) pressure cap (D) electronic thermostat - ANSWERD

Vista previa del contenido

ENGINE COOLING EXAM LATEST UPDATE ALREADY
GRADED A 2024-2025 UPDATE
About how much of the heat produced within modern engine combustion
chambers must be removed by the vehicle cooling system? (A) One-fourth. (B)
One-third. (C) One-half. (D) Two-thirds. - ANSWER>>B


True or False? One job of the engine cooling system is to maintain an efficient
temperature during all operating conditions. - ANSWER>>True


All of the following conditions can occur to an engine operating below its
efficient operating temperature (cold), except: (A) decreased horsepower. (B)
formation of engine deposits. (C) lower exhaust emissions. (D) decreased fuel
mileage. - ANSWER>>C


True or False? Most car and light truck engines use an air cooling system. -
ANSWER>>False


_____ are cast into the engine block and cylinder heads for liquid to flow
through a liquid-cooled engine. (A) Cooling fins (B) Expansion tanks (C)
Cooling passages (D) Freeze plugs - ANSWER>>C


True or False? A liquid-cooled engine uses pure water to cool the engine. -
ANSWER>>False


To control engine temperature more accurately, the coolant pump on some new
vehicles is driven by a(n) _____. (A) internal gear (B) electric motor (C) belt-
driven clutch (D) chain drive - ANSWER>>B

Información del documento

Subido en
7 de junio de 2025
Número de páginas
4
Escrito en
2024/2025
Tipo
Examen
Contiene
Preguntas y respuestas
$14.49

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
QueenElsa
4.9
(61)
Vendido
82
Seguidores
36
Artículos
997
Última venta
4 meses hace


Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes