1
AUD Final Questions with Correct
Answers for Specific Exam Mail
Consoles have four basic sections. This section is where
the signal from the sound source is amplified and is fed
into the output section.
Ans: - Input Section
The console section is where signal is routed to recoding
devices.
Ans: Output section
This console section has the global controls,
communication facilities, and routing for the final mix
Ans: Master section
The section is used to hear what is coming from recording
media
Ans: Monitor section
Pretest - Stuvia US
,2
The basic functions of a console include
Ans: All of the above
- Volume
- Tone
- EQ
- Panning
Using half of a consoles channels for input and the other
half for monitoring best describes
Ans: Split monitoring
Which type of console monitoring is the most common in
today's professional mixers
Ans: In-Line console monitoring
Pads, Trims/Gains, Phase Reversal and Phantom Power
would be found on which I/O module?
Ans: Input module
Pretest - Stuvia US
,3
This is a wire that connects a destination, which can be
accessed by various sources
Ans: Buss
This console features is used for the communication
between the control room engineers and the studio
performers
Ans: Talkback Control
This console feature is used to feed anything aid through
the talkback mic onto to the tape path, for adding verbal
information
Ans: Slate control
This feature is used for calibrating the console with the
analog recording tape deck and for creating test tone
levels
Ans: Oscillator
Pretest - Stuvia US
, 4
This section of the console is used primarily for
headphone cues and effect sends
Ans: Aux sends
Which of these would be used to raise the incoming
signal to operational level?
Ans: Gain/Trim
Which of these would be used to reduce incoming signal
dB levels?
Ans: Pad
Which of these might be used in recording a snare drum
with a top and bottom mic?
Ans: Phase Reversal
Which of these would be used to reduce or eliminate
frequency rumble?
Ans: Low cut filter
Pretest - Stuvia US
AUD Final Questions with Correct
Answers for Specific Exam Mail
Consoles have four basic sections. This section is where
the signal from the sound source is amplified and is fed
into the output section.
Ans: - Input Section
The console section is where signal is routed to recoding
devices.
Ans: Output section
This console section has the global controls,
communication facilities, and routing for the final mix
Ans: Master section
The section is used to hear what is coming from recording
media
Ans: Monitor section
Pretest - Stuvia US
,2
The basic functions of a console include
Ans: All of the above
- Volume
- Tone
- EQ
- Panning
Using half of a consoles channels for input and the other
half for monitoring best describes
Ans: Split monitoring
Which type of console monitoring is the most common in
today's professional mixers
Ans: In-Line console monitoring
Pads, Trims/Gains, Phase Reversal and Phantom Power
would be found on which I/O module?
Ans: Input module
Pretest - Stuvia US
,3
This is a wire that connects a destination, which can be
accessed by various sources
Ans: Buss
This console features is used for the communication
between the control room engineers and the studio
performers
Ans: Talkback Control
This console feature is used to feed anything aid through
the talkback mic onto to the tape path, for adding verbal
information
Ans: Slate control
This feature is used for calibrating the console with the
analog recording tape deck and for creating test tone
levels
Ans: Oscillator
Pretest - Stuvia US
, 4
This section of the console is used primarily for
headphone cues and effect sends
Ans: Aux sends
Which of these would be used to raise the incoming
signal to operational level?
Ans: Gain/Trim
Which of these would be used to reduce incoming signal
dB levels?
Ans: Pad
Which of these might be used in recording a snare drum
with a top and bottom mic?
Ans: Phase Reversal
Which of these would be used to reduce or eliminate
frequency rumble?
Ans: Low cut filter
Pretest - Stuvia US
