WMGT 101-22A EXAM 3/ACTUAL EXAM
QUESTIONS WITH COMPLETE
SOLUTIONS!!/NEWEST UPDATE
Save
Students also studied
Flashcard sets Study guides
ATP Rigging State Farm Estimatics Exam NYS Tow Truck Endo
40 terms 26 terms Teacher 20 terms
guzman2340 Preview nawf__king Preview linetkamau23
Stretch your brain before your first study session
Learn 1 /7 Study with Learn
Baseline threat used in the design of protective measures
Choose matching term
1 Environmental Impact Statement (EIS) 2 Environmental Assessment (EA)
3 AFMAN 91-203 4 Design Basis Threat (DBT)
Don't know?
CE shall: have at least 1 engineer at each base must complete
Security Eng AT Planning & Design Course, review, document,
and track construction projects AT compliance, provide
AFI 10-245, Antiterrorism
vulnerability assessment protection option program (VAPO)
analysis for all critical facilities and off-base leases, and work with
the Base Antiterrorism Officer
, 1. UFC 4-020-01
2. Is only the minimum standard required?
Antiterrorism Requirement 3. Yes: construction standoff distance available?
Planning No: UFC 4-020-02 and support manuals
4. If standoff distance is available, apply UFC 4-010-01 and
support manuals
Design Basis Threat (DBT) Baseline threat used in the design of protective measures
Based on planning team, local intel and Geographic Combatant
Initial DBT
Command (COCOM) Theater-Wide threat assessments
Modify Initial DBT Local threat assessments
The degree to which an asset is protected, defines the amount of
Level of Protection
damage a facility or asset can sustain during an attack
Progressive collapse is unlikely, but space in and around
damaged area will be unusable and onset of structural collapse
LOP: Very low occurs. Glazing is likely to be propelled into the building and
cause serious injuries. Doors may be propelled into rooms,
presenting serious hazards.
Building will not be economically repairable and space in and
around damaged area will not be usable, but progressive
LOP: Low collapse will not occur. Glazing will fracture and may come out
of the frame, but does not present a significant injury hazard.
Doors may fail but present minimal hazards.
Minor damage, space in and around damaged area can be used
and will be fully functional after cleanup and repairs. Glazing will
LOP: Medium
fracture but remain in the frame. Doors may stay in frames but
will not be reusable.
Minimal to no damage with no permanent definitions. Glazing
LOP: High
will not break. Doors will be reusable.
DoD minimum antiterrorism standards for buildings. Intent is to
UFC 4-010-01 reduce mass casualties, minimize collateral damage to nearby
facilities, and facilitate future upgrades and increases FPCON.
DoD Security Engineering Facility Planning Manual. Acts as a
starting point for Garrison Antiterrorism and a quantitative risk-
UFC 4-020-01 based model. Uses scoring model to evaluate asset value (0-1.0),
threat likelihood (0-1.0), and use of minimum AT standards (<0.5).
Includes cost data and helps establish a DBT and required LOP.
1. Bollards, fences, curbs, and barriers are and adequate
substitution for standoff
AT/FP misconceptions
2. Existing roads must be moved away from existing buildings
3. All building require standoff
Standard 1: Standoff distance
Standard 6: Progressive collapse
Mandatory design standards
Standard 10: Glazing
Standard 16: Air Intakes
Smallest permissible standoff distance for new and existing
Minimum standoff distance construction, regardless of analysis or hardening of the building.
Not used for master planning or programming.
QUESTIONS WITH COMPLETE
SOLUTIONS!!/NEWEST UPDATE
Save
Students also studied
Flashcard sets Study guides
ATP Rigging State Farm Estimatics Exam NYS Tow Truck Endo
40 terms 26 terms Teacher 20 terms
guzman2340 Preview nawf__king Preview linetkamau23
Stretch your brain before your first study session
Learn 1 /7 Study with Learn
Baseline threat used in the design of protective measures
Choose matching term
1 Environmental Impact Statement (EIS) 2 Environmental Assessment (EA)
3 AFMAN 91-203 4 Design Basis Threat (DBT)
Don't know?
CE shall: have at least 1 engineer at each base must complete
Security Eng AT Planning & Design Course, review, document,
and track construction projects AT compliance, provide
AFI 10-245, Antiterrorism
vulnerability assessment protection option program (VAPO)
analysis for all critical facilities and off-base leases, and work with
the Base Antiterrorism Officer
, 1. UFC 4-020-01
2. Is only the minimum standard required?
Antiterrorism Requirement 3. Yes: construction standoff distance available?
Planning No: UFC 4-020-02 and support manuals
4. If standoff distance is available, apply UFC 4-010-01 and
support manuals
Design Basis Threat (DBT) Baseline threat used in the design of protective measures
Based on planning team, local intel and Geographic Combatant
Initial DBT
Command (COCOM) Theater-Wide threat assessments
Modify Initial DBT Local threat assessments
The degree to which an asset is protected, defines the amount of
Level of Protection
damage a facility or asset can sustain during an attack
Progressive collapse is unlikely, but space in and around
damaged area will be unusable and onset of structural collapse
LOP: Very low occurs. Glazing is likely to be propelled into the building and
cause serious injuries. Doors may be propelled into rooms,
presenting serious hazards.
Building will not be economically repairable and space in and
around damaged area will not be usable, but progressive
LOP: Low collapse will not occur. Glazing will fracture and may come out
of the frame, but does not present a significant injury hazard.
Doors may fail but present minimal hazards.
Minor damage, space in and around damaged area can be used
and will be fully functional after cleanup and repairs. Glazing will
LOP: Medium
fracture but remain in the frame. Doors may stay in frames but
will not be reusable.
Minimal to no damage with no permanent definitions. Glazing
LOP: High
will not break. Doors will be reusable.
DoD minimum antiterrorism standards for buildings. Intent is to
UFC 4-010-01 reduce mass casualties, minimize collateral damage to nearby
facilities, and facilitate future upgrades and increases FPCON.
DoD Security Engineering Facility Planning Manual. Acts as a
starting point for Garrison Antiterrorism and a quantitative risk-
UFC 4-020-01 based model. Uses scoring model to evaluate asset value (0-1.0),
threat likelihood (0-1.0), and use of minimum AT standards (<0.5).
Includes cost data and helps establish a DBT and required LOP.
1. Bollards, fences, curbs, and barriers are and adequate
substitution for standoff
AT/FP misconceptions
2. Existing roads must be moved away from existing buildings
3. All building require standoff
Standard 1: Standoff distance
Standard 6: Progressive collapse
Mandatory design standards
Standard 10: Glazing
Standard 16: Air Intakes
Smallest permissible standoff distance for new and existing
Minimum standoff distance construction, regardless of analysis or hardening of the building.
Not used for master planning or programming.
