| OnlineExams | TestPrep | StudyResources | AcademicSuccess | ExamPreparation | QuizTime | LearningTools | Education | StudentSupport
In today's fast-paced educational landscape, students need reliable resources to excel in their studies.
5.0
SHP final Questions with Detailed Verified Answers
(100% Correct Answers) /Already Graded A+
The firefighter may be installed next to a stand-alone battery smoke
detector
Ans: True
When performing a full system test, you may bypass any open doors or
windows
Ans: False
When programming an skey1,you must
Ans: Always enable the emergency
When running power to the take345,polarity doesn't apply
Ans: False
When programming the emergency key for the skey1,which
zone/sensor type is used.
Ans: Audible alarm (7)
When installing a smkt3,you must use the included screws and anchors
Ans: True
Sunday, 02 March 2025
, When installing the firefighter, it is required to test the customers existing
smoke detectors
Ans: True
When installing a Dw21, where is the approved location for the sensor
Ans: Between 6"(15cm) and 2'(61cm) from floor
When installing a dw11 on a vinyl or metal frame, what should primarily
use to mount the sensor
Ans: Provided double sided tape
Which of the following materials can you use to group multiple ground
terminals in a takeover.
Ans: Beans & wire caps
Which of the following sensors are you not allowed to program using a
translator
Ans: Smoke detector
When installing the take345, you must always test the new 12v battery
before using it.
Ans: True
Examstudy - Stuvia US
In today's fast-paced educational landscape, students need reliable resources to excel in their studies.
5.0
SHP final Questions with Detailed Verified Answers
(100% Correct Answers) /Already Graded A+
The firefighter may be installed next to a stand-alone battery smoke
detector
Ans: True
When performing a full system test, you may bypass any open doors or
windows
Ans: False
When programming an skey1,you must
Ans: Always enable the emergency
When running power to the take345,polarity doesn't apply
Ans: False
When programming the emergency key for the skey1,which
zone/sensor type is used.
Ans: Audible alarm (7)
When installing a smkt3,you must use the included screws and anchors
Ans: True
Sunday, 02 March 2025
, When installing the firefighter, it is required to test the customers existing
smoke detectors
Ans: True
When installing a Dw21, where is the approved location for the sensor
Ans: Between 6"(15cm) and 2'(61cm) from floor
When installing a dw11 on a vinyl or metal frame, what should primarily
use to mount the sensor
Ans: Provided double sided tape
Which of the following materials can you use to group multiple ground
terminals in a takeover.
Ans: Beans & wire caps
Which of the following sensors are you not allowed to program using a
translator
Ans: Smoke detector
When installing the take345, you must always test the new 12v battery
before using it.
Ans: True
Examstudy - Stuvia US
