The flue connection from the outlet of the boiler or furnace to the chimney base
should as _____ as possible to maintain good draft.
Give this one a try later!
short
The best way to adjust an oil burner is
,Give this one a try later!
by combustion testing equipment
. If the draft through an appliance is too high, what adjustment should be made.
Give this one a try later!
• Adjust the barometric damper to more of a closed position
The newer flame retention type combustion heads (flame retention rings):
Give this one a try later!
Are made from stainless steel and use air vanes
In energy efficient homes of the future, oil may be used to provide:
Give this one a try later!
Heating
A fuel oil storage tank cannot be installed
Give this one a try later!
, In the furnace room with 5' of heating unit.
In new homes, if a chimney is going to be used, it must:
Give this one a try later!
•Be correctly sized for the appliance and be insulated
Because burner fans have beveled blades any dirt or lint in the blade will
Give this one a try later!
•a. Reduce the amount of air for combustion
. One advantage to lightweight combustion chambers is they:
Give this one a try later!
cool down quickly
Cold oil can cause CO2 levels to:
Give this one a try later!
, Decrease
When a cad cell is in the dark, its resistance should be:
Give this one a try later!
Above 10,000 ohms of resistance
The annual fuel utilization efficiency (AFUE) is:
Give this one a try later!
A test performed to rate boilers and furnaces
The draft inducer fan on a side wall venting system should be installed:
Give this one a try later!
Close to the outside wall
What steps should you follow when replacing a boiler or furnace to assure high
efficiency?
Give this one a try later!
should as _____ as possible to maintain good draft.
Give this one a try later!
short
The best way to adjust an oil burner is
,Give this one a try later!
by combustion testing equipment
. If the draft through an appliance is too high, what adjustment should be made.
Give this one a try later!
• Adjust the barometric damper to more of a closed position
The newer flame retention type combustion heads (flame retention rings):
Give this one a try later!
Are made from stainless steel and use air vanes
In energy efficient homes of the future, oil may be used to provide:
Give this one a try later!
Heating
A fuel oil storage tank cannot be installed
Give this one a try later!
, In the furnace room with 5' of heating unit.
In new homes, if a chimney is going to be used, it must:
Give this one a try later!
•Be correctly sized for the appliance and be insulated
Because burner fans have beveled blades any dirt or lint in the blade will
Give this one a try later!
•a. Reduce the amount of air for combustion
. One advantage to lightweight combustion chambers is they:
Give this one a try later!
cool down quickly
Cold oil can cause CO2 levels to:
Give this one a try later!
, Decrease
When a cad cell is in the dark, its resistance should be:
Give this one a try later!
Above 10,000 ohms of resistance
The annual fuel utilization efficiency (AFUE) is:
Give this one a try later!
A test performed to rate boilers and furnaces
The draft inducer fan on a side wall venting system should be installed:
Give this one a try later!
Close to the outside wall
What steps should you follow when replacing a boiler or furnace to assure high
efficiency?
Give this one a try later!
