| OnlineExams | TestPrep | StudyResources | AcademicSuccess | ExamPreparation | QuizTime | LearningTools | Education | StudentSupport
In today's fast-paced educational landscape, students need reliable resources to excel in their studies.
5.0
AUD FINAL QUESTIONS WITH DETAILED VERIFIED
ANSWERS (100% CORRECT ANSWERS) /ALREADY
GRADED A+
Consoles have four basic sections. This section is where the signal from
the sound source is amplified and is fed into the output section.
Ans: - Input Section
The console section is where signal is routed to recoding devices.
Ans: Output section
This console section has the global controls, communication facilities,
and routing for the final mix
Ans: Master section
The section is used to hear what is coming from recording media
Ans: Monitor section
The basic functions of a console include
Ans: All of the above
- Volume
- Tone
- EQ
- Panning
Sunday, 02 March 2025
,Using half of a consoles channels for input and the other half for
monitoring best describes
Ans: Split monitoring
Which type of console monitoring is the most common in today's
professional mixers
Ans: In-Line console monitoring
Pads, Trims/Gains, Phase Reversal and Phantom Power would be found
on which I/O module?
Ans: Input module
This is a wire that connects a destination, which can be accessed by
various sources
Ans: Buss
This console features is used for the communication between the
control room engineers and the studio performers
Ans: Talkback Control
This console feature is used to feed anything aid through the talkback
mic onto to the tape path, for adding verbal information
Ans: Slate control
Examstudy - Stuvia US
, This feature is used for calibrating the console with the analog
recording tape deck and for creating test tone levels
Ans: Oscillator
This section of the console is used primarily for headphone cues and
effect sends
Ans: Aux sends
Which of these would be used to raise the incoming signal to
operational level?
Ans: Gain/Trim
Which of these would be used to reduce incoming signal dB levels?
Ans: Pad
Which of these might be used in recording a snare drum with a top
and bottom mic?
Ans: Phase Reversal
Which of these would be used to reduce or eliminate frequency
rumble?
Ans: Low cut filter
Examstudy - Stuvia US
In today's fast-paced educational landscape, students need reliable resources to excel in their studies.
5.0
AUD FINAL QUESTIONS WITH DETAILED VERIFIED
ANSWERS (100% CORRECT ANSWERS) /ALREADY
GRADED A+
Consoles have four basic sections. This section is where the signal from
the sound source is amplified and is fed into the output section.
Ans: - Input Section
The console section is where signal is routed to recoding devices.
Ans: Output section
This console section has the global controls, communication facilities,
and routing for the final mix
Ans: Master section
The section is used to hear what is coming from recording media
Ans: Monitor section
The basic functions of a console include
Ans: All of the above
- Volume
- Tone
- EQ
- Panning
Sunday, 02 March 2025
,Using half of a consoles channels for input and the other half for
monitoring best describes
Ans: Split monitoring
Which type of console monitoring is the most common in today's
professional mixers
Ans: In-Line console monitoring
Pads, Trims/Gains, Phase Reversal and Phantom Power would be found
on which I/O module?
Ans: Input module
This is a wire that connects a destination, which can be accessed by
various sources
Ans: Buss
This console features is used for the communication between the
control room engineers and the studio performers
Ans: Talkback Control
This console feature is used to feed anything aid through the talkback
mic onto to the tape path, for adding verbal information
Ans: Slate control
Examstudy - Stuvia US
, This feature is used for calibrating the console with the analog
recording tape deck and for creating test tone levels
Ans: Oscillator
This section of the console is used primarily for headphone cues and
effect sends
Ans: Aux sends
Which of these would be used to raise the incoming signal to
operational level?
Ans: Gain/Trim
Which of these would be used to reduce incoming signal dB levels?
Ans: Pad
Which of these might be used in recording a snare drum with a top
and bottom mic?
Ans: Phase Reversal
Which of these would be used to reduce or eliminate frequency
rumble?
Ans: Low cut filter
Examstudy - Stuvia US
