1 Exampromax - Stuvia US 2025/2026
NACE CIP LEVEL 1 EXAM NEWEST 2025 COMPLETE 180
QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) |ALREADY GRADED A+
All corrosion of iron at normal ambient conditions is
Ans: an electrochemical process
The cathode of a corrosion cell
Ans: has an opposite electrical polarity to the anode
©, 2025 All rights reserved®
Based on the galvanic series presented in the NACE CIP Level 1 Manual,
which three can be used effectively as galvanic anodes for carbon steel?
Exampromax - Stuvia US
Ans: Zinc, aluminum, magnesium
A corrosion inhibitor is a substance that, when added to an environment
Ans: decreases the rate of corrosion
A decrease in temperature will generally cause the corrosion rate to
Ans: decrease
The electrolyte is the solution that carries (conducts)
Ans: the anion, and the cations
While oxidation occurs at the anode, reduction occurs at the cathode
Ans: true
The four elements of a corrosion cell are anode, the cathode, the electrode,
and the metallic pathway
Ans: False
The anode is the
, 2 Exampromax - Stuvia US 2025/2026
Ans: part of the metal that corrodes
General corrosion is described as
Ans: uniform loss of thickness over the exposed surface
In order to reach consensus and to resolve conflict on the job, the NACE
Inspector's preferred course of action is to
Ans: actively listen and endeavor to understand the postions of others.
A proper coating specification should contain information regarding
Ans: surface preparation standards, safety, locations to be coated
©, 2025 All rights reserved®
According to the NACE attestation, it's OK to accept a gift from a
Exampromax - Stuvia US
contractor as long as the gift is below the value identified in your company
policy.
Ans: false
If an inspector finds discrepancies between the specification and the coating
manufacturers technical data sheet, the preferred coarse of action is to
Ans: seek written clarification from the specifier
All of the following are generally included within inspection reports
EXCEPT
Ans: cost information
Inspectors reports provide sufficient detail permitting the owner to evaluate
Ans: contractor's performance, inspector's performance, job progress, work
interruptions
When applying coatings, instruction regarding appropriate types of
Personal Protection Equipment (PPE) will always be found within the
Ans: material safety data sheet (MSDS) or safety data sheet (SDS)
NACE CIP LEVEL 1 EXAM NEWEST 2025 COMPLETE 180
QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) |ALREADY GRADED A+
All corrosion of iron at normal ambient conditions is
Ans: an electrochemical process
The cathode of a corrosion cell
Ans: has an opposite electrical polarity to the anode
©, 2025 All rights reserved®
Based on the galvanic series presented in the NACE CIP Level 1 Manual,
which three can be used effectively as galvanic anodes for carbon steel?
Exampromax - Stuvia US
Ans: Zinc, aluminum, magnesium
A corrosion inhibitor is a substance that, when added to an environment
Ans: decreases the rate of corrosion
A decrease in temperature will generally cause the corrosion rate to
Ans: decrease
The electrolyte is the solution that carries (conducts)
Ans: the anion, and the cations
While oxidation occurs at the anode, reduction occurs at the cathode
Ans: true
The four elements of a corrosion cell are anode, the cathode, the electrode,
and the metallic pathway
Ans: False
The anode is the
, 2 Exampromax - Stuvia US 2025/2026
Ans: part of the metal that corrodes
General corrosion is described as
Ans: uniform loss of thickness over the exposed surface
In order to reach consensus and to resolve conflict on the job, the NACE
Inspector's preferred course of action is to
Ans: actively listen and endeavor to understand the postions of others.
A proper coating specification should contain information regarding
Ans: surface preparation standards, safety, locations to be coated
©, 2025 All rights reserved®
According to the NACE attestation, it's OK to accept a gift from a
Exampromax - Stuvia US
contractor as long as the gift is below the value identified in your company
policy.
Ans: false
If an inspector finds discrepancies between the specification and the coating
manufacturers technical data sheet, the preferred coarse of action is to
Ans: seek written clarification from the specifier
All of the following are generally included within inspection reports
EXCEPT
Ans: cost information
Inspectors reports provide sufficient detail permitting the owner to evaluate
Ans: contractor's performance, inspector's performance, job progress, work
interruptions
When applying coatings, instruction regarding appropriate types of
Personal Protection Equipment (PPE) will always be found within the
Ans: material safety data sheet (MSDS) or safety data sheet (SDS)
