CCAR EXAM QUESTIONS WITH 100%
VERIFIED CORRECT ANSWERS.
1. Personal Protective Equipment is a substitute for good engineering or administrative
controls or good work practices?
False
Many on-the-job involving eyes were a result of?
Not wearing eye protection
In operations when the entire face needs protection__________ should be worn to protect
eyes and face against flying particles, metal sparks, and chemical / biological splash.
A full-face shield
Rubber is considered the best material for insulating gloves and sleeves
True
The PPE rules require that rings, wristwatches, earrings, bracelets, and other jewelry must
not be worn if there is a possibility for it to come into contact with power-driven machinery
or electric circuitry?
True
Pliers are generally considered a__________?
Handheld/Gripping tool
When using a handheld grinder or cutoff wheel, if workpiece or area is still attached to the
vehicle, make sure to protect flammable or delicate parts from?
Sparks or heat
Using chrome, thin-wall sockets with power tools may result in breakage and possible
injury?
True
When using portable powered (non-battery) tools, don't touch grounded areas such as
pipes, equipment, or machinery; there is a greater risk of ___________if your body is
grounded?
Electric shock
If used incorrectly (or abused), bench grinders have the potential to break and fragment
grinding wheels, releasing shrapnel towards the operator at high speed with significant
speed?
, True
Electrolyte is made 62-65% sulfuric acid?
True
Some automotive battery systems are capable of producing and discharging extremely high
currents?
True
Electric arcs can produce very high___________, bright light, and cause fires?
Heat
The most common chemical hazard when working with or handling batteries is exposure
to___________?
Sulfuric acid exposure
Prior to working with AGM or other batteries all of the following personal protection
measures should be taken except?
Wearing loose clothing
Eye protection is essential when servicing wheels and tires because of the possibility
of________?
Exploding tire parts
Do not mount defective tires or wheel rims?
True
Identify the__________ of the wheel prior to clamping or securing for demount?
Drop center
Never inflate above __________PSI to seat the bead?
40
During inflation snap or pop noises and distortion in the sidewall may be an indication
of________?
Sidewall failure
Unlike any other lifting system (e.g., Cranes, Forklifts), Automotive lifts are unique as
being the only lifting system that permits people to work under a supported load?
True
On older in-ground (45-50 years) lifts, safety locks may have been optional equipment?
VERIFIED CORRECT ANSWERS.
1. Personal Protective Equipment is a substitute for good engineering or administrative
controls or good work practices?
False
Many on-the-job involving eyes were a result of?
Not wearing eye protection
In operations when the entire face needs protection__________ should be worn to protect
eyes and face against flying particles, metal sparks, and chemical / biological splash.
A full-face shield
Rubber is considered the best material for insulating gloves and sleeves
True
The PPE rules require that rings, wristwatches, earrings, bracelets, and other jewelry must
not be worn if there is a possibility for it to come into contact with power-driven machinery
or electric circuitry?
True
Pliers are generally considered a__________?
Handheld/Gripping tool
When using a handheld grinder or cutoff wheel, if workpiece or area is still attached to the
vehicle, make sure to protect flammable or delicate parts from?
Sparks or heat
Using chrome, thin-wall sockets with power tools may result in breakage and possible
injury?
True
When using portable powered (non-battery) tools, don't touch grounded areas such as
pipes, equipment, or machinery; there is a greater risk of ___________if your body is
grounded?
Electric shock
If used incorrectly (or abused), bench grinders have the potential to break and fragment
grinding wheels, releasing shrapnel towards the operator at high speed with significant
speed?
, True
Electrolyte is made 62-65% sulfuric acid?
True
Some automotive battery systems are capable of producing and discharging extremely high
currents?
True
Electric arcs can produce very high___________, bright light, and cause fires?
Heat
The most common chemical hazard when working with or handling batteries is exposure
to___________?
Sulfuric acid exposure
Prior to working with AGM or other batteries all of the following personal protection
measures should be taken except?
Wearing loose clothing
Eye protection is essential when servicing wheels and tires because of the possibility
of________?
Exploding tire parts
Do not mount defective tires or wheel rims?
True
Identify the__________ of the wheel prior to clamping or securing for demount?
Drop center
Never inflate above __________PSI to seat the bead?
40
During inflation snap or pop noises and distortion in the sidewall may be an indication
of________?
Sidewall failure
Unlike any other lifting system (e.g., Cranes, Forklifts), Automotive lifts are unique as
being the only lifting system that permits people to work under a supported load?
True
On older in-ground (45-50 years) lifts, safety locks may have been optional equipment?
